Application of Navier-Stokes analysis to stall flutter

A solution procedure was developed to investigate the two-dimensional, one- or two-dimensional flutter characteristics of arbitrary airfoils. This procedure requires a simultaneous integration in time of the solid and fluid equations of motion. The fluid equations of motion are the unsteady compressible Navier-Stokes equations, solved in a body-fitted moving coordinate system using an approximate factorization scheme. The solid equations of motion are integrated in time using an Euler implicit scheme. Flutter is said to occur if small disturbances imposed on the airfoil attitude lead to divergent oscillatory motions at subsequent times. The flutter characteristics of airfoils in subsonic speed at high angles of attack and airfoils in high subsonic and transonic speeds at low angles of attack are investigated. The stall flutter characteristics are also predicted using the same procedure

Catalytic Characterization of Bi-functional Catalysts Derived from Pd--Mg--Al Layered Double Hydroxides

Hydrotalcite like precursors containing PdII–MgII–AlIII with varying molar ratios, (Pd + Mg)/Al » 3 and Mg/Pd » 750 to 35, were prepared by coprecipitation of metal nitrates at constant pH. Characterization of samples as synthesized and their calcined products by elemental analyses, powder XRD, TG–DTA, FT–IR spectroscopy, TPR and N2 physisorption indicated a well crystalline hydrotalcite like structure with incorporation of Pd2+ in the brucite layers. Thermal decomposition of hydrotalcite precursors at intermediate temperatures led to amorphous mixed oxides, Pd/MgAl(O), which on reduction yielded bi-functional catalyst, Pd°/MgAl(O). The resultant catalysts with acid, base and hydrogenating sites, were highly active and selective for one-step synthesis of methyl isobutyl ketone (MIBK) from acetone and hydrogen. The results showed an optimal balance between acid-base and metallic sites were required to increase the selectivity of MIBK and stability of the catalysts

Graphene formed on SiC under various environments: Comparison of Si-face and C-face

The morphology of graphene on SiC {0001} surfaces formed in various environments including ultra-high vacuum, 1 atm of argon, and 10^-6 to 10^-4 Torr of disilane is studied by atomic force microscopy, low-energy electron microscopy, and Raman spectroscopy. The graphene is formed by heating the surface to 1100 - 1600 C, which causes preferential sublimation of the Si atoms. The argon atmosphere or the background of disilane decreases the sublimation rate so that a higher graphitization temperature is required, thus improving the morphology of the films. For the (0001) surface, large areas of monolayer-thick graphene are formed in this way, with the size of these areas depending on the miscut of the sample. Results on the (000-1) surface are more complex. This surface graphitizes at a lower temperature than for the (0001) surface and consequently the growth is more three-dimensional. In an atmosphere of argon the morphology becomes even worse, with the surface displaying markedly inhomogeneous nucleation, an effect attributed to unintentional oxidation of the surface during graphitization. Use of a disilane environment for the (000-1) surface is found to produce improved morphology, with relatively large areas of monolayer-thick graphene.Comment: 22 pages, 11 figures, Proceedings of STEG-2 Conference; eliminated Figs. 4 and 7 from version 1, for brevity, and added Refs. 18, 29, 30, 31 together with associated discussio

Formation of a rotating jet during the filament eruption on 10-11 April 2013

We analyze multi-wavelength and multi-viewpoint observations of a helically twisted plasma jet formed during a confined filament eruption on 10-11 April 2013. Given a rather large scale event with its high spatial and temporal resolution observations, it allows us to clearly understand some new physical details about the formation and triggering mechanism of twisting jet. We identify a pre-existing flux rope associated with a sinistral filament, which was observed several days before the event. The confined eruption of the filament within a null point topology, also known as an Eiffel tower (or inverted-Y) magnetic field configuration results in the formation of a twisted jet after the magnetic reconnection near a null point. The sign of helicity in the jet is found to be the same as that of the sign of helicity in the filament. Untwisting motion of the reconnected magnetic field lines gives rise to the accelerating plasma along the jet axis. The event clearly shows the twist injection from the pre-eruptive magnetic field to the jet.Comment: 14 pages, 12 figures, to appear in MNRA

Soft gluon radiation and energy dependence of total hadronic cross-sections

An impact parameter representation for soft gluon radiation is applied to obtain both the initial decrease of the total cross-section ($\sigma_{tot}$) for proton-proton collisions as well as the later rise of $\sigma_{tot}$ with energy for both $pp$ and $p\bar{p}$. The non-perturbative soft part of the eikonal includes only limited low energy gluon emission and leads to the initial decrease in the proton-proton cross- section. On the other hand, the rapid rise in the hard, perturbative jet part of the eikonal is tamed into the experimentally observed mild increase by soft gluon radiation whose maximum energy rises slowly with energy.Comment: 30 pages, 6 figures. Version accepted for publication in Physical Review D. Additional section with explanatory material added making the paper more self contained and two figures changed to have a complete summary of the available accelerator dat

Observational Evidence of Sausage-Pinch Instability in Solar Corona by SDO/AIA

We present the first observational evidence of the evolution of sausage-pinch instability in Active Region 11295 during a prominence eruption using data recorded on 12 September 2011 by the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO). We have identified a magnetic flux tube visible in AIA 304 \AA\ that shows curvatures on its surface with variable cross-sections as well as enhanced brightness. These curvatures evolved and thereafter smoothed out within a time-scale of a minute. The curved locations on the flux tube exhibit a radial outward enhancement of the surface of about 1-2 Mm (factor of 2 larger than the original thickness of the flux tube) from the equilibrium position. AIA 193 \AA\ snapshots also show the formation of bright knots and narrow regions inbetween at the four locations as that of 304 \AA\ along the flux tube where plasma emission is larger compared to the background. The formation of bright knots over an entire flux tube as well as the narrow regions in < 60 s may be the morphological signature of the sausage instability. We also find the flows of the confined plasma in these bright knots along the field lines, which indicates the dynamicity of the flux tube that probably causes the dominance of the longitudinal field component over short temporal scales. The observed longitudinal motion of the plasma frozen in the magnetic field lines further vanishes the formed curvatures and plasma confinements as well as growth of instability to stablize the flux tube.Comment: 12 pages, 5 figure

Similar solutions of the boundary layer equations for power law fluids

This article does not have an abstract

Magnetoelectric Effects on Composite Nano Granular Fe/TiO2−δFe/TiO_{2-\delta} Films

Employing a new experimental technique to measure magnetoelectric response functions, we have measured the magnetoelectric effect in composite films of nano granular metallic iron in anatase titanium dioxide at temperatures below 50 K. A magnetoelectric resistance is defined as the ratio of a transverse voltage to bias current as a function of the magnetic field. In contrast to the anomalous Hall resistance measured above 50 K, the magnetoelectic resistance below 50 K is significantly larger and exhibits an even symmetry with respect to magnetic field reversal $H\to -H$. The measurement technique required attached electrodes in the plane of the film composite in order to measure voltage as a function of bias current and external magnetic field. To our knowledge, the composite films are unique in terms of showing magnetoelectric effects at low temperatures, $<$ 50 K, and anomalous Hall effects at high temperatures, $>$ 50 K.Comment: ReVTeX, 2 figures, 3 page

Integrability and level crossing manifolds in a quantum Hamiltonian system

We consider a two-spin model, represented classically by a nonlinear autonomous Hamiltonian system with two degrees of freedom and a nontrivial integrability condition, and quantum mechanically by a real symmetric Hamiltonian matrix with blocks of dimensionalities K=l(l+1)/2, l=1,2,... In the six-dimensional (6D) parameter space of this model, classical integrability is satisfied on a 5D hypersurface, and level crossings occur on 4D manifolds that are completely embedded in the integrability hypersurface except for some lower-D sub-manifolds. Under mild assumptions, the classical integrability condition can be reconstructed from a purely quantum mechanical study of level degeneracies in finite-dimensional invariant blocks of the Hamiltonian matrix. Our conclusions are based on rigorous results for K=3 and on numerical results for K=6,10.Comment: 8 pages, 3 figure