The effect of ion plated silver and sliding friction on tensile stress-induced cracking in aluminum oxide

A Hertzian analysis of the effect of sliding friction on contact stresses in alumina is used to predict the critical load for crack generation. The results for uncoated alumina and alumina coated with ion plated silver are compared. Friction coefficient inputs to the analysis are determined experimentally with a scratch test instrument employing an 0.2 mm radius diamond stylus. A series of scratches were made at constant load increments on coated and uncoated flat alumina surfaces. Critical loads for cracking are detected by microscopic examination of cross sections of scratches made at various loads and friction coefficients. Acoustic emission (AE) and friction trends were also evaluated as experimental techniques for determining critical loads for cracking. Analytical predictions correlate well with micrographic evidence and with the lowest load at which AE is detected in multiple scratch tests. Friction/load trends are not good indicators of early crack formation. Lubrication with silver films reduced friction and thereby increased the critical load for crack initiation in agreement with analytical predictions

Frictional behavior and adhesion of Ag and Au films applied to aluminum oxide by oxygen-ion assisted Screen Cage Ion Plating (SCIP)

A modified dc-diode ion plating system, by utilizing a metallic screen cage as a cathode, is introduced for coating nonconductors such as ceramics. Screen cage ion plating (SCIP) is used to apply Ag and Au lubricating films on aluminum oxide surfaces. This process has excellent ability to coat around corners to produce three-dimensional coverage of the substrate. A dramatic increase in adhesion is achieved when plating is performed in a reactive 50 percent O2 - 50 percent Ar glow discharge compared to the adhesion when plating is performed in 100 percent Ar. The presence of oxygen ion assistance contributes to the excellent adhesion as measured in a pull-type adhesion tester. The Ag and Au film adhesion is significantly increased (less than 70MPa) and generally exceeds the cohesion of the substrate such that portions of the alumina are pulled out

Integrated Circuits Based on Bilayer MoS

Two-dimensional (2D) materials, such as molybdenum disulfide (MoS2), have been shown to exhibit excellent electrical and optical properties. The semiconducting nature of MoS2 allows it to overcome the shortcomings of zero-bandgap graphene, while still sharing many of graphene’s advantages for electronic and optoelectronic applications. Discrete electronic and optoelectronic components, such as field-effect transistors, sensors, and photodetectors made from few-layer MoS2 show promising performance as potential substitute of Si in conventional electronics and of organic and amorphous Si semiconductors in ubiquitous systems and display applications. An important next step is the fabrication of fully integrated multistage circuits and logic building blocks on MoS2 to demonstrate its capability for complex digital logic and high-frequency ac applications. This paper demonstrates an inverter, a NAND gate, a static random access memory, and a five-stage ring oscillator based on a direct-coupled transistor logic technology. The circuits comprise between 2 to 12 transistors seamlessly integrated side-by-side on a single sheet of bilayer MoS2. Both enhancement-mode and depletion-mode transistors were fabricated thanks to the use of gate metals with different work functions.United States. Office of Naval Research (Young Investigator Program)Microelectronics Advanced Research Corporation (MARCO) (Focus Center for Materials, Structure and Device (MARCO MSD))National Science Foundation (U.S.) (NSF DMR 0845358)United States. Army Research Offic

Influence of age and message frame on COVID-19 vaccination willingness early in the pandemic

Objective: This study examined whether age would moderate the association between a brief message frame intervention and COVID-19 vaccine willingness. Methods: Data were collected in Australia between 25 June and 5 July 2021. Participants (N = 187) aged 18–85 years had not yet received a dose of COVID-19 vaccine. After random assignment to a gain- or loss-framed message, participants reported COVID-19 vaccine willingness, general anti-vaccine attitudes, approach and avoidance motivation, and COVID-19 illness risk perception. Results: Message frame did not influence COVID-19 vaccine willingness. However, greater COVID-19 illness risk perception and older age increased the odds of Pfizer vaccine willingness, while lower avoidance motivation increased the odds of AstraZeneca vaccine willingness. Greater anti-vaccine ideology decreased the odds of willingness to receive either of the COVID-19 vaccines. Conclusions: A brief message frame intervention did not influence COVID-19 vaccine willingness across the adult lifespan

Supplemental Material - Influence of Age and Message Frame on COVID-19 Vaccination Willingness Early in the Pandemic

Supplemental Material for Influence of Age and Message Frame on COVID-19 Vaccination Willingness Early in the Pandemic by Nikita C. Spalvins, Tarren Leon, and Phoebe E. Bailey in Journal of Applied Gerontology</p