1,085 research outputs found
Subseismic to Seismic Slip in Smectite Clay Nanofoliation
Smectite clays are the main constituent of slipping zones found in subduction zone faults at shallow depth (e.g., <1-km depth in the Japan Trench) and in the decollements of large landslides (e.g., 1963 landslide, Vajont, Italy). Therefore, deformation processes in smectite clays may control the mechanical behavior from slow creep to fast accelerations and slip during earthquakes and landslides. Here, we use (1) laboratory experiments to investigate the mechanical behavior of partly water-saturated smectite-rich gouges sheared from subseismic to seismic slip rates V and (2) nanoscale microscopy to study the gouge fabric. At all slip rates, deformation localizes in volumes of the gouge layer that contain a \u201cnanofoliation\u201d consisting of anastomosing smectite crystals. \u201cSeismic\u201d nanofoliations produced at V = 0.01, 0.1, and 1.3 m/s are similar to \u201csubseismic\u201d nanofoliations obtained at V = 10 125 m/s. This similarity suggests that frictional slip along water-lubricated smectite grain boundaries and basal planes may occur from subseismic to seismic slip rates in natural smectite-rich faults. Thus, if water is available along smectite grain boundaries and basal planes, nanofoliations can develop from slow to fast slip rates. Still, when nanofoliations are found highly localized in a volume, they can be diagnostic of slip that occurred at rates equal or larger than 0.01 m/s. In such a case, they could be markers of past seismic events when found in natural fault rocks
Fault Friction During Simulated Seismic Slip Pulses
Theoretical studies predict that during earthquake rupture faults slide at non-constant slip velocity, however it is not clear which source time functions are compatible with the high velocity rheology of earthquake faults. Here we present results from high velocity friction experiments with non-constant velocity history, employing a well-known seismic source solution compatible with earthquake source kinematics. The evolution of friction in experiments shows a strong dependence on the applied slip history, and parameters relevant to the energetics of faulting scale with the impulsiveness of the applied slip function. When comparing constitutive models of strength against our experimental results we demonstrate that the evolution of fault strength is directly controlled by the temperature evolution on and off the fault. Flash heating predicts weakening behavior at short timescales, but at larger timescales strength is better predicted by a viscous creep rheology. We use a steady-state slip pulse to test the compatibility of our strength measurements at imposed slip rate history with the stress predicted from elastodynamic equilibrium. Whilst some compatibility is observed, the strength evolution indicates that slip acceleration and deceleration might be more rapid than that imposed in our experiments
Introduction of seismic source directivity on hazard map
The seismic hazard maps are mainly influenced by the uncertainty associated to the ground motion predictive equation (GMPE). This uncertainty represents the unexplained part of the ground motion and it is mostly related to the choice of the model’s variables. In fact the representation of the ground motion through the GMPEs is simple compared to the complexity of the physical process involved: if only the magnitude and distance are taken into account, GMPEs predicts isoseismals curves that are expected to be isotropic around the hypocenter or along the fault. Instead, the presence of a fault plane across which a process of failure in shear develops makes this general formulation reliable only on average. In fact this failure is responsible of an asymmetry in the seismic radiation known, since Ben-Menhaem (PhD1961), as directivity effect. While the general knowledge of the earthquakes is treated explicitly in the empirical prediction, specific trends like the directivity effects are hidden in the uncertainty sigma. A way to reduce the sigma is therefore to refine the seismic seismic source description inside the GMPEs (e.g. NGA project, Power et al, Earthquake Spectra, 2008).
In this framework we propose a strategy to introduce the directivity in the GMPEs and to study its effect on uncertainties and on hazard maps. For this purpose, we have used two different directivity models acting on the GMPE as corrective factors: one proposed by Somerville et al. (Seis.Res.Lett.1997) and the other one proposed by Spudich and Chiou (Earthquake Spectra 2008).The first factor depends on geometrical parameters and comes from theoretical deduction. The second one includes many source parameters and it is a hybrid factor, which functional formulation is deduced from the theory, calibrated on synthetic simulations and scaled on data.
The classic hazard equation is then adapted in order to increase the number of source parameters (i.e. adding one integral over the parametric space for each new variable involved) and taking into account the corrective factors for directivity (Spagnuolo, PhD2010). We present the comparisons of hazard maps depending on the directivity factor and on the probability density functions of the fault strike and of the rupture “laterality”
Variability of kinematic source parameters and its implication on the choice of the design scenario
Near-fault seismic recordings for recent earthquakes (Chi Chi earthquake,
1999, and Parkfield earthquake, 2004) show the high spatial heterogeneity
of ground motion. This variability is controlled by fault geometry, rupture complexity,
and also by wave propagation and site effects. Nowadays, the number of available
records in the near-source region is still not enough to infer a robust parameterization
of the ground motion and to retrieve multiparametric predictive equations valid at
close distances from the fault. The use of a synthetic approach may help to overcome
this limitation and to study the strong ground motion variability. In this article we
focus on ground-motion dependence on different earthquakes breaking the same fault,
as it has been rarely recorded by instruments. We model seismic scenarios from different
rupture models of a fault similar to the 1980 Irpinia, Italy, earthquake source
(Mw 6.9). A discrete wavenumber/finite element technique is used to compute fullwave
displacement and velocity time series in the low-frequency band (up to 2 Hz).
We investigate the variability of the ground motion as a function of different
source parameters (rupture velocity, slip distribution, nucleation point, and source
time function), whose values depend on the state of knowledge of the physical model
driving the process. The probability density functions of the simulated ground-motion
parameters, such as displacement response spectrum and peak ground velocity, are
used to identify particular scenarios that match specific engineering requests
Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures?
The central theme of this study is to investigate a remarkable capability of a second-gradient continuum model developed for pantographic structures. The model is applied to a particular type of this metamaterial, namely the wide-knit pantograph. As this type of structure has low fiber density, the applicability of such a continuum model may be questionable. To address this uncertainty, numerical simulations are conducted to analyze the behavior of a wide-knit pantographic structure, and the predicted results are compared with those measured experimentally under bias extension testing. The results presented in this study show that the numerical predictions and experimental measurements are in good agreement; therefore, in some useful circumstances, this model is applicable for the analysis of wide-knit pantographic structures
Water Availability and Deformation Processes in Smectite-Rich Gouges During Seismic Slip
Smectite clays occur in subduction zone fault cores at shallow depth (approximately 1 km; e.g., Japan Trench) and landslide d\ue9collements (e.g., Vajont, Italy, 1963). The availability of pore fluids affects the likelihood that seismic slip propagates from deeper to shallow fault depths or that a landslide accelerates to its final collapse. To investigate the deformation processes active during seismic faulting we performed friction experiments with a rotary machine on 2-mm-thick smectite-rich gouge layers (70/30 wt % Ca-montmorillonite/opal) sheared at 5-MPa normal stress, at slip rates of 0.001, 0.01, 0.1, and 1.3 m/s, and total displacement of 3 m. Experiments were performed on predried gouges under vacuum, under room humidity and under partly saturated conditions. The fault shear strength measured in the experiments was included in a one-dimensional numerical model incorporating frictional heating, thermal, and thermochemical pressurization. Quantitative X-ray powder diffraction and scanning electron microscopy investigations were performed on pristine and deformed smectite-rich gouges. Under dry conditions, cataclasis and amorphization dominated at slip rates of 0.001\u20130.1 m/s, whereas grain size sensitive flow and, under vacuum, frictional melting occurred at fast slip rates (1.3 m/s). Under partly saturated conditions, frictional slip in a smectite foliation occurred in combination with pressurization of water by shear-enhanced compaction and, for V = 0.01\u20131.3 m/s, with thermal pressurization. Pseudotachylytes, the only reliable microstructural markers for seismic slip, formed only with large frictional power (>2 MW/m2), which could be achieved at shallow depth with high slip rates, or, at depth, with high shear stress in dehydrated smectites
Fluid pressurisation and earthquake propagation in the Hikurangi subduction zone
In subduction zones, seismic slip at shallow crustal depths can lead to the generation of tsunamis. Large slip displacements during tsunamogenic earthquakes are attributed to the low coseismic shear strength of the fluid-saturated and non-lithified clay-rich fault rocks. However, because of experimental challenges in confining these materials, the physical processes responsible for the coseismic reduction in fault shear strength are poorly understood. Using a novel experimental setup, we measured pore fluid pressure during simulated seismic slip in clay-rich materials sampled from the deep oceanic drilling of the Pāpaku thrust (Hikurangi subduction zone, New Zealand). Here, we show that at seismic velocity, shear-induced dilatancy is followed by pressurisation of fluids. The thermal and mechanical pressurisation of fluids, enhanced by the low permeability of the fault, reduces the energy required to propagate earthquake rupture. We suggest that fluid-saturated clay-rich sediments, occurring at shallow depth in subduction zones, can promote earthquake rupture propagation and slip because of their low permeability and tendency to pressurise when sheared at seismic slip velocities
Variability of kinematic source parameters and its implication on the choice of the design scenario
Near-fault seismic recordings for recent earthquakes (Chi Chi earthquake, 1999; Parkfield earthquake, 2004) show the high spatial heterogeneity of ground motion. This variability is controlled by fault geometry, rupture complexity, and also by wave propagation and site effects.
Nowadays, the number of available records in near-source region is still not enough to infer a robust parameterization of the ground motion and to retrieve multi-parametric predictive equations valid at
close distances from the fault. The use of a synthetic approach may help to overcome this limitation and to study the strong ground motion variability. In this paper we focus on ground-motion dependence on different earthquakes breaking the same fault, as it has been rarely recorded by instruments. We model seismic scenarios from different rupture models of a fault similar to the
1980 Irpinia, Italy, earthquake source (Mw 6.9). A discrete wavenumber-finite element technique is used to compute full-wave displacement and velocity time series in the low-frequency band (up to 2 Hz).
We investigate the variability of the ground motion as a function of different source parameters (rupture velocity, slip distribution, nucleation point, source time function), whose values depend on the state of knowledge of the physical model driving the process. The probability density functions of the simulated ground motion parameters, such as displacement response spectrum (SD) and peak ground velocity (PGV), have been used to identify particular scenarios that match specific engineering requests
Notes on the marine algae of the Bermudas. 15. \u3cem\u3eDichotomaria huismanii\u3c/em\u3e (\u3cem\u3eGalaxauraceae\u3c/em\u3e, Rhodophyta), a new species in the \u3cem\u3eD. marginata\u3c/em\u3e complex from the western Atlantic
Using plastid-encoded rbcL and mitochondrial COI-5P sequence data, the species in Bermuda formerly recognized as Dichotomaria marginata was found to be a cryptic species in a wide complex of species all falling under the morphologically broad species concept for this supposed pantropical species. The new species, Dichotomaria huismanii, shows subtle anatomical and morphological differences when compared to D. marginata, and at present is only known from Bermuda. Bermuda specimens were compared with our isolates of D. marginata from St. Croix (Virgin Is.), as well as rbcL sequenced specimens with those from Guadeloupe and Puerto Rico in GenBank as D. marginata. Morphological and molecular characterization of D. marginata is provided along with the new species
MicroRNA profiling in sera of patients with type 2 diabetes mellitus reveals an upregulation of miR-31 expression in subjects with microvascular complications
Type 2 diabetes (T2D) is a metabolic disease characterized by chronic hyperglycaemia due to a combination of resistance to insulin action and an inadequate compensatory insulin secretory response. Chronic hyperglycemia is associated with long-term micro- and macrovascular complications leading to dysfunction of several organs including kidney, heart, eye and nervous system. Early identification of chronic diabetic complications is necessary in order to prevent dysfunction and failure of these different organs. MicroRNAs (or miRNAs) are small endogenous RNAs, which negatively regulate gene expression. Recently, it has been demonstrated that miRNAs can be secreted by cells, thus being detectable in serum and in other biological fluids. Circulating microRNAs have been proposed as possible biomarkers of several diseases. Here, we performed a miRNAs expression profiling in the sera of T2D patients with or without vascular complications in order to find specific biomarkers to characterize T2D complications. We analyzed the expression of 384 microRNAs in serum pools from 3 groups of T2D patients: 12 T2D patients without any chronic complications, 12 T2D patients with macrovascular complications and 12 with microvascular complications. We found 223 miRNAs expressed in T2D,224 inT2D with microvascular and221 inT2D with macrovascular complications. Among expressed microRNAs, 45 resulted upregulated and 23 downregulated in microvascular patients sera, while 13 upregulated and 41 downregulated in macrovascular T2D patients compared to those without complications. We focused and validated microRNA miR-31 expression in single sera from each group, which resulted significantly upregulated in patients with microvascular complications and may be indeed related to the presence of microangiopathy. In conclusion, our study has identified miR-31 as a promising biomarker for diabetic microvascular complications; further prospective studies in the clinical setting are however required to establish the real utility of measuring serum circulating levels of this microRNA
- …