THERMAL AND ELECTRO-THERMAL MODELING OF COMPONENTS AND SYSTEMS: A REVIEW OF THE RESEARCH AT THE UNIVERSITY OF PARMA

This paper reviews the activity carried out at the Department of Information Engineering of the University of Parma, Italy, in the field of thermal and electro-thermal modeling of devices, device and package assemblies, circuits, and systems encompassing active boards and heat-sinking elements. This activity includes: (i) Finite-Element 3D simulation for the thermal analysis of a hierarchy of structures ranging from bare device dies to complex systems including active and passive devices, boards, metallizations, and air- and water-cooled heat-sinks, and (ii) Lumped-Element thermal or electro-thermal models of bare and packaged devices, ranging from purely empirical to strictly physics- and geometry-based

Wavelike Structures in the Turbulent Layer During the Morning Development of Convection at Dome C, Antarctica

n/

NaNet:a low-latency NIC enabling GPU-based, real-time low level trigger systems

We implemented the NaNet FPGA-based PCI2 Gen2 GbE/APElink NIC, featuring GPUDirect RDMA capabilities and UDP protocol management offloading. NaNet is able to receive a UDP input data stream from its GbE interface and redirect it, without any intermediate buffering or CPU intervention, to the memory of a Fermi/Kepler GPU hosted on the same PCIe bus, provided that the two devices share the same upstream root complex. Synthetic benchmarks for latency and bandwidth are presented. We describe how NaNet can be employed in the prototype of the GPU-based RICH low-level trigger processor of the NA62 CERN experiment, to implement the data link between the TEL62 readout boards and the low level trigger processor. Results for the throughput and latency of the integrated system are presented and discussed.Comment: Proceedings for the 20th International Conference on Computing in High Energy and Nuclear Physics (CHEP

Surface and Aerodynamic Parameters Estimation for Urban and Rural Areas

Numerical weather prediction models require an accurate parametrization of the energy budget at the air-ground interface, that can be obtained only through long-term atmospheric boundary layer measurements at different spatial and temporal scales. Despite their importance, such measurements are still scarce even in well-characterized areas. In this paper, a three-year dataset from four micrometeorological stations run by the Regional Agency for Environmental Protection of Lazio was analyzed to estimate albedo, zero-displacement height, roughness length and surface properties over Rome and its suburbs, characterizing differences and interconnections between urban, suburban and rural areas of the same municipality. The integral albedo coefficient at the zenith for the urban station was found to be almost twice that for suburban and rural stations. The zero-displacement height of the urban site was strongly dependent on wind direction, with values varying between 12.0 and 17.8 m, while the roughness length (≈1.5 m) was almost independent of upwind direction, but it was significantly higher than the typical values calculated for rural stations (≈0.4 m). The apparent thermal capacities and thermal conductivity at all the non-urban sites were in fair agreement with each other and typical of soils with relatively low water content, as expected for a relatively dry Mediterranean area like Rome, while the apparent thermal diffusivity reflected the presence of different soil types

Sentinel node mapping in endometrial cancer: Tips and tricks to improve bilateral detection rate. The sentitricks study, a monocentric experience.

Abstract Objective The objective of the study is to show some small tricks for bilateral sentinel lymph node (SLN) uptake in endometrial cancer. Materials and methods Each step of the sentinel lymph node technique was analyzed. The cervix was exposed through the use of vaginal valves and by Martin pliers stapling of the anterior cervical lip. Fifty mg Indocyanine Green (ICG) powder was diluted with 10 ml of physiological solution. The spinal needle was marked at 15 mm with a steri-strip. After 20 min from the administration, in case of no LNS identification, an additional 1 ml in the non-detected side was administered in the superficial cervical area. All cervical injections were made by a single (BR) surgeon experienced in oncological gynecology. Results Fifty patients undergoing sentinel lymph node research for endometrial cancer. The uptake of at least one side of the sentinel node was 98% (49 cases). Forty-six (92%) patients had bilateral lymph node uptake and 3 patients (6%) had unilateral uptake. Only one patient with pelvic and metastatic aortic lymph nodes had no sentinel nodal uptake. Conclusions Little tricks can increase the bilateral uptake of the SLN up to 92%. The reinjection could be a key element for the success of the SLN technique. Experienced surgeons could certainly play a fundamental role in raising bilateral SLN detection. Further prospective randomized studies are needed to achieve the best SLN infiltration strategy

Analysis of Ga grading in CIGS absorbers with different Cu content

This work investigates the effect of Cu content and Ga grading on the performance of CIGS cells, by means of numerical simulations and comparison with corresponding experiments. Different Ga profiles and Cu average concentrations are considered. We show that the optical effect of Cu content must be properly taken into account to model NIR absorption. As far as the GGI profile is concerned, we show that the main improvement can be obtained by increasing the GGI ratio toward the back-side; an optimized notch bandgap profile can be designed with the help of these indications

THERMAL AND ELECTRO-THERMAL MODELING OF COMPONENTS AND SYSTEMS: A REVIEW OF THE RESEARCH AT THE UNIVERSITY OF PARMA

This paper reviews the activity carried out at the Department of Information Engineering of the University of Parma, Italy, in the field of thermal and electro-thermal modeling of devices, device and package assemblies, circuits, and systems encompassing active boards and heat-sinking elements. This activity includes: (i) Finite-Element 3D simulation for the thermal analysis of a hierarchy of structures ranging from bare device dies to complex systems including active and passive devices, boards, metallizations, and air- and water-cooled heat-sinks, and (ii) Lumped-Element thermal or electro-thermal models of bare and packaged devices, ranging from purely empirical to strictly physics- and geometry-based

A high-resolution TDC-based board for a fully digital trigger and data acquisition system in the NA62 experiment at CERN

A Time to Digital Converter (TDC) based system, to be used for most sub-detectors in the high-flux rare-decay experiment NA62 at CERN SPS, was built as part of the NA62 fully digital Trigger and Data AcQuisition system (TDAQ), in which the TDC Board (TDCB) and a general-purpose motherboard (TEL62) will play a fundamental role. While TDCBs, housing four High Performance Time to Digital Converters (HPTDC), measure hit times from sub-detectors, the motherboard processes and stores them in a buffer, produces trigger primitives from different detectors and extracts only data related to the lowest trigger level decision, once this is taken on the basis of the trigger primitives themselves. The features of the TDCB board developed by the Pisa NA62 group are extensively discussed and performance data is presented in order to show its compliance with the experiment requirements.Comment: 6 pages, 7 figures, presented to IEEE RT 2014 Conference and I want to publish in TN

Myocardial involvement during the early course of type 2 diabetes mellitus: usefulness of Myocardial Performance Index

To evaluate whether myocardial performance index detects a subclinical impairment of left ventricular systolic and diastolic function in patients with early stage of type 2 diabetes, without coronary artery disease, with or without hypertension. Furthermore, to evaluate whether some echocardiographic parameters relate to the metabolic control. Fourty-five consecutive male patients (mean age 52.5 years) with type 2 diabetes mellitus of recent onset (23 hypertensives and 22 normotensives) and 22 age matched healthy controls males were analysed. All participants had normal exercise ECG. All subjects underwent standard and Doppler echocardiography for the assessment of the isovolumic Doppler time interval and Doppler-derived myocardial performance index. In all diabetic patients a glycated haemoglobin test was also performed

Stopping Smoking Reduces Mortality in Low-Dose Computed Tomography Screening Participants

Abstract Introduction The National Lung Screening Trial has achieved a 7% reduction in total mortality with low-dose computed tomography (LDCT) screening as compared with in the chest radiography arm. Other randomized trials are under way, comparing LDCT screening with no intervention. None of these studies was designed to investigate the impact of smoking habits on screening outcome. In the present study, we tested the effect of stopping smoking on the overall mortality of participants undergoing repeated LDCT screening for many years. Methods Between 2000 and 2010, 3381 smokers aged 50 years or older were enrolled in two LDCT screening programs. On the basis of the last follow-up information, subjects were divided into two groups: current smokers throughout the screening period and former smokers. Results With a median follow-up time of 9.7 years and a total of 32,857 person-years (PYs) of follow-up, a total of 151 deaths were observed in the group of 1797 current smokers (17,846 PYs) versus 109 among 1584 former smokers (15,011 PYs), corresponding to mortality rates of 8.46 and 7.26 for every 1000 PYs, respectively. Compared with current smokers, former smokers had an adjusted mortality hazard ratio of 0.61 (95% confidence interval: 0.44–0.83), with a 39% reduction in mortality. A similar reduction in mortality was observed in the subset of 712 late quitters, with a hazard ratio of 0.65 (95% confidence interval: 0.44–0.96). Conclusions Stopping smoking significantly reduces the overall mortality of smokers enrolled in LDCT screening programs. The beneficial effect of stopping smoking on total mortality appears to be threefold to fivefold greater than the one achieved by earlier detection in the National Lung Screening Trial