Results of closed cycle MHD power generation test with a helium-cesium working fluid

The cross sectional dimensions of the MHD channel in the NASA Lewis closed loop facility were reduced to 3.8 x 11.4 cm. Tests were run in this channel using a helium-cesium working fluid at stagnation pressures of 160,000 n/M2, stagnation temperatures of 2000-2060 K and an entrance Mach number of 0.36. In these tests Faraday open circuit voltages of 200 V were measured which correspond to a Faraday field of 1750 V/M. Power generation tests were run for different groups of electrode configurations and channel lengths. Hall fields up to 1450 V/M were generated. Power extraction per electrode of 183 W and power densities of 1.7 MW/M3 were obtained. A total power output of 2 kW was generated for tests with 14 electrodes. The power densities obtained in this channel represent a factor of 3 improvement over those previously reported for the M = 0.2 channel

Closed cycle MHD power generation experiments using a helium-cesium working fluid in the NASA Lewis Facility

A MHD channel, which was previously operated for over 500 hours of thermal operation, ten thermal cycles, and 200 cesium injection tests, was removed from the facility and redesigned. The cross sectional dimensions of the channel were reduced to 5 by 16.5 cm to allow operation over a variety of conditions. The redesigned channel has been operated for well over 300 hours, 10 thermal cycles, and 150 cesium injection tests with no problems. Experiments have been run at temperatures of 1900-2100 K and Mach numbers from 0.3 to 0.55 in argon and 0.2 in helium. The best results to date have been obtained in the helium tests. Power outputs of 2.2 kw for tests with 28 electrodes and 2.1 kw for tests with 17 electrodes were realized. Power densities of 0.6 MW/cu m and Hall fields of about 1,100 V/m were obtained in the tests with 17 electrodes

Nuclear power systems for lunar and Mars exploration

Initial studies of a variety of mission scenarios for the new Space Exploration Initiative, and the technologies necessary to enable or significantly enhance them, have identified the development of advanced space power systems whether solar, chemical or nuclear to be of prime importance. Lightweight, compact, reliable power systems for planetary rovers and a variety of surface vehicles, utility surface power, and power for advanced propulsion systems have been identified as critical needs for these missions. These mission scenarios, the concomitant power system requirements, and power system options considered are discussed. The significant potential benefits of nuclear power are identified for meeting the power needs of the above applications

Historical perspectives: The role of the NASA Lewis Research Center in the national space nuclear power programs

The history of the NASA Lewis Research Center's role in space nuclear power programs is reviewed. Lewis has provided leadership in research, development, and the advancement of space power and propulsion systems. Lewis' pioneering efforts in nuclear reactor technology, shielding, high temperature materials, fluid dynamics, heat transfer, mechanical and direct energy conversion, high-energy propellants, electric propulsion and high performance rocket fuels and nozzles have led to significant technical and management roles in many national space nuclear power and propulsion programs

Closed cycle MHD power generation experiments in the NASA Lewis Facility

Many modifications were made in the MHD facility. These include a redesign of the MHD duct interior, addition of mixing bars, increased electrical isolation of all the high temperature components from each other and from ground, and experimentation with various cesium seed vaporization and injection techniques. With the exception of the cesium system which needs further improvement the above modifications were quite successful and resulted in improvements in generator performance. The facility was run for a total of 400 hours in the past year, with 70 hours of this operation at temperatures of 2000 K or more with hot generator walls. With the exception of replacing one cracked brick in the MHD channel no repairs were required in the high temperature loop components for the duration of these tests. Uniform Faraday and Hall voltage profiles were obtained and the Faraday open circuit voltage varied from 90 to 100 percent of the ideal uBh. The magnitudes of the measured parameters are: Faraday open circuit voltage approximately 70 V, total Faraday current approximately 20 A, Hall voltage approximately 250 V, power output approximately 300 W, and power density .036 W/cu cm

A summary of the ECAS performance and cost results for MHD systems

The potential is examined of various advanced power plant concepts using coal and coal-derived fuel. The results indicate that open cycle coal fired direct preheat MHD systems have potentially one of the highest coal-pile-to-bus-bar efficiencies and also one of the lowest costs of electricity (COE) of the systems studied. Closed cycle MHD systems may have the potential to approach the efficiency and COE of open cycle MHD. The 1200-1500 F liquid metal MHD systems studied do not appear to have the potential of exceeding the efficiency or competing with the COE of advanced steam plants

Ebola spillover correlates with bat diversity

Some of the world’s deadliest diseases and greatest public health challenges are zoonoses from wildlife, such as Ebola (Ebolavirus). Due to the increasing number of cases in recent years, it has been widely hypothesized that increasing human population densities and anthropogenic disturbance largely explain outbreaks of Ebola virus disease in humans. While studies indicate that ebolaviruses are likely hosted by bats (Chiroptera), their role in outbreaks of the disease remains unclear. We tested whether bat species richness (total and within families), human population density, and anthropogenic disturbance explained the occurrence of Ebola virus disease spillovers within Africa using both generalized linear models and Maxent models. We demonstrate that spillover occurred in areas with high species richness of nycterid bats and low levels of both anthropogenic disturbance and human population density. Outbreaks of Ebola virus disease have devastating effects on people and communities and our results provide an important step toward understanding how and where Ebola virus disease may spill over to human populations.The National Science Foundation Graduate Research Fellowship under Grant No. DGE-1315138 (JTS).http://link.springer.com/journal/103442020-12-01hj2020Mammal Research InstituteZoology and Entomolog

What difference does ("good") HRM make?

The importance of human resources management (HRM) to the success or failure of health system performance has, until recently, been generally overlooked. In recent years it has been increasingly recognised that getting HR policy and management "right" has to be at the core of any sustainable solution to health system performance. In comparison to the evidence base on health care reform-related issues of health system finance and appropriate purchaser/provider incentive structures, there is very limited information on the HRM dimension or its impact. Despite the limited, but growing, evidence base on the impact of HRM on organisational performance in other sectors, there have been relatively few attempts to assess the implications of this evidence for the health sector. This paper examines this broader evidence base on HRM in other sectors and examines some of the underlying issues related to "good" HRM in the health sector. The paper considers how human resource management (HRM) has been defined and evaluated in other sectors. Essentially there are two sub-themes: how have HRM interventions been defined? and how have the effects of these interventions been measured in order to identify which interventions are most effective? In other words, what is "good" HRM? The paper argues that it is not only the organisational context that differentiates the health sector from many other sectors, in terms of HRM. Many of the measures of organisational performance are also unique. "Performance" in the health sector can be fully assessed only by means of indicators that are sector-specific. These can focus on measures of clinical activity or workload (e.g. staff per occupied bed, or patient acuity measures), on measures of output (e.g. number of patients treated) or, less frequently, on measures of outcome (e.g. mortality rates or rate of post-surgery complications). The paper also stresses the need for a "fit" between the HRM approach and the organisational characteristics, context and priorities, and for recognition that so-called "bundles" of linked and coordinated HRM interventions will be more likely to achieve sustained improvements in organisational performance than single or uncoordinated interventions

Optical emission spectroscopy of electron-cyclotron-resonance-heated helium mirror plasmas

In this experiment emission spectroscopy in the 3000–5000 Å range has been utilized to determine the electron temperature (15–60 eV) and ion density (2–5 x 10 11 cm −3 ) of helium plasmas produced by the Michigan mirror machine (1) (MIMI). The plasma is generated and heated by whistler-mode electron-cyclotron resonance (ECR) waves at 7.43 GHz with 400–900 W power in 80-ms-long pulses. Gas fueling is provided at the midplane region by a leak valve with a range in pressure of 3 x 10 to 2 x 10 4 Torr. Emission line intensities are interpreted using a model of the important collisional and radiative processes occurring in the plasma. The model examines secondary processes such as radiation trapping, excitation transfer between levels of the carne principle quantum number, and excitation front metastable states for plasmas in the parameter range of MIMI ( n c = 1−6 x 10 11 cm −3 ). Front the analysis of line intensity ratios for neutral helium, the electron temperature is measured and its dependence upon the gas pressure and microwave power is determined. These temperatures agree with those obtained by Langmuir probe measurements. Art analysis of the line intensity ratio between singly ionized helium and neutral helium yields a measurement of the ion density which is in good agreement with electron density measurements made by a microwave interferometer.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/45473/1/11090_2005_Article_BF01447032.pd