UV Exposed Optical Fibers with Frequency Domain Reflectometry for Device Tracking in Intra-Arterial Procedures

Shape tracking of medical devices using strain sensing properties in optical fibers has seen increased attention in recent years. In this paper, we propose a novel guidance system for intra-arterial procedures using a distributed strain sensing device based on optical frequency domain reflectometry (OFDR) to track the shape of a catheter. Tracking enhancement is provided by exposing a fiber triplet to a focused ultraviolet beam, producing high scattering properties. Contrary to typical quasi-distributed strain sensors, we propose a truly distributed strain sensing approach, which allows to reconstruct a fiber triplet in real-time. A 3D roadmap of the hepatic anatomy integrated with a 4D MR imaging sequence allows to navigate the catheter within the pre-interventional anatomy, and map the blood flow velocities in the arterial tree. We employed Riemannian anisotropic heat kernels to map the sensed data to the pre-interventional model. Experiments in synthetic phantoms and an in vivo model are presented. Results show that the tracking accuracy is suitable for interventional tracking applications, with a mean 3D shape reconstruction errors of 1.6 +/- 0.3 mm. This study demonstrates the promising potential of MR-compatible UV-exposed OFDR optical fibers for non-ionizing device guidance in intra-arterial procedures

Experimental studies of the material properties of the forewing of cicada (Homóptera, Cicàdidae)

Detailed investigations on the structural and mechanical properties of the forewing of the cicada were carried out. Measurement of the structures of the wings showed that the thickness of the membrane of each cell and the diameter of each vein were non-uniform in both the longitudinal and transverse directions, and their means were approximately 12.2 and 133.3 μm, respectively. However, the aspect ratios of the wings and the bodies were quite uniform and were approximately equal to 2.98 and 2.13, respectively. Based on the measured thickness, mass and area of the membranes of the cells, the mean density and the mean area density of the wing were approximately 2.3 g cm -3 and 2.8×10 -3 g cm -2, respectively. In addition, the diameters of the veins of the wings, including the diameters of the holes in the vein of the leading edge, were examined. The mechanical properties of the wing were investigated separately by nanoindentation and tensile testing. The results indicated that the mean Young's modulus, hardness and yield stress of the membranes of the wings were approximately 3.7 GPa, 0.2 GPa and 29 MPa, respectively, and the mean Young's modulus and strength of the veins along the direction of the venation of wings were approximately 1.9 GPa and 52 MPa, respectively. Finally, the relevant results were briefly analyzed and discussed, providing a guideline to the biomimetic design of the aerofoil materials of micro air vehicles.published_or_final_versio

A possible mechanism to tune magneto-electroluminescence in organic light-emitting diodes through adjusting the triplet exciton density

At 15 K, the high field decay of magneto-electroluminescence (MEL) in tris (8-hydroxyquinoine) aluminum (Alq 3)-based organic light-emitting diodes is greatly suppressed by mixing hole transport material N,N′-bis(naphthalen-1-y)-N,N′-bis(phenyl) benzidine (NPB) into Alq 3 emission layer. The positive correlation between the MEL decay and the triplet exciton density indicates the reduced triplet exciton density is the major contributing factor. The change of triplet exciton density and then the MEL upon NPB mixing may result from the strengths change of charge-triplets interaction, in which the injected charges flowing through the exciton formation zone without forming static space charges play the most important role. © 2011 American Institute of Physics.published_or_final_versio

Intermolecular Interactions and Thermodynamic Properties of 3,6-Diamino-1,2,4,5-tetrazine-1,4-dioxide Dimers: A Density Functional Theoretical Study

Three fully optimized structures of 3,6-diamino-1,2,4,5-tetrazine-1,4-dioxide (LAX-112) dimers have been obtained with the density functional theory (DFT) method at the B3LYP/6-311++G level. Vibrational frequency calculations were carried out to ascertain that each structure is a minimum (no imaginary frequencies). The intermolecular interaction energy is calculated with the basis set superposition error (BSSE) correction and zero point energy (ZPE) correction. The greatest corrected binding energy among the three dimers is –42.38 kJ mol–1. The charge redistribution mainly occurs on the adjacent O(N)……H atoms between submolecules and the charge transfer between two subsystems is very small. Natural bond orbital (NBO) analysis was performed to reveal the origin of the interaction. Based on the vibrational analysis, the standard thermodynamic functions (heat capacities (cop), entropies (Som ) and enthalpies (Hom)) and the changes of thermodynamic properties from the monomer to dimer with the temperature ranging from 200.00 K to 800.00 K have been obtained using statistical thermodynamics. The results show that the strong hydrogen bonds dominantly contribute to the dimers, while the bonding energies are not only determined by the hydrogen bonding. The dimerization process of dimer II can occur spontaneously at room temperature.KEYWORDS 3,6-Diamino-1,2,4,5-tetrazine-1,4-dioxide (LAX-112), intermolecular interaction, density functional theory (DFT), natural bond orbital (NBO) analysis, thermodynamic properties

Genes encoding Pir51, Beclin 1, RbAp48 and aldolase b are up or down-regulated in human primary hepatocellular carcinoma

Aim: To reveal new tumor markers and target genes from differentially expressed genes of primary tumor samples using cDNA microarray. Methods: The 33P labeled cDNAs were synthesized by reverse transcription of message RNA from the liver cancerous tissue and adjacent non-cancerous liver tissue from the same patient and used to hybridize to LifeGrid 1.0 cDNA microarray blot containing 8400 known and unique human cDNA gene targets, and an expression profile of genes was produced in one paired human liver tumor tissue. After a global analysis of gene expression of 8400 genes, we selected some genes to confirm the differential expression using Northern blot and RT-PCR. Results: Parallel analysis of the hybridized signals enabled us to get an expression profile of genes in which about 500 genes were differentially expressed in the paired liver tumor tissues. We identified 4 genes, the expression of three (Beclin 1, RbAp48 and Pir51) were increased and one (aldolase b) was decreased in liver tumor tissues. In addition, the expression of these genes in 6 hepatoma cell lines was also showed by RT-PCR analysis. Conclusion: cDNA microarray permits a high throughput identification of changes in gene expression. The genes encoding Beclin 1, RbAp48, Pir51 and aldolase b are first reported that may be related with hepatocarcinoma. Copyright © 2004 by The WJG Press ISSN 1007-9327.published_or_final_versio

Design and Testing of Cesium Atomic Concentration Detection System Based on TDLAS

In order to better build the Neutral Beam Injector with Negative Ion Source (NNBI), the pre-research on key technologies has been carried out for the Comprehensive Research Facility for Fusion Technology (CRAFT). Cesium seeding into negative-ion sources is a prerequisite to obtain the required negative hydrogen ion. The performance of ion source largely depends on the cesium conditions in the source. It is very necessary to quantitatively measure the amount of cesium in the source during the plasma on and off periods (vacuum stage). This article uses the absorption peak of cesium atoms near 852.1nm to build a cesium atom concentration detection system based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) technology. The test experiment based on the cesium cell is carried out, obtained the variation curve of cesium concentration at different temperatures. The experimental results indicate that: the system detection range is within 5*10E6-2.5*10E7 pieces/cm3 and the system resolution better than 1*10E6 pieces/cm3.Comment: 8 pages,7 figures, the 20th International Symposium on Laser-Aided Plasma Diagnostic

Evidence for Two Modes of Synergistic Induction of Apoptosis by Mapatumumab and Oxaliplatin in Combination with Hyperthermia in Human Colon Cancer Cells

Colorectal cancer is the third leading cause of cancer-related mortality in the world-- the main cause of death from colorectal cancer is hepatic metastases, which can be treated with isolated hepatic perfusion (IHP). Searching for the most clinically relevant approaches for treating colorectal metastatic disease by isolated hepatic perfusion (IHP), we developed the application of oxaliplatin concomitantly with hyperthermia and humanized death receptor 4 (DR4) antibody mapatumumab (Mapa), and investigated the molecular mechanisms of this multimodality treatment in human colon cancer cell lines CX-1 and HCT116 as well as human colon cancer stem cells Tu-12, Tu-21 and Tu-22. We showed here, in this study, that the synergistic effect of the multimodality treatment-induced apoptosis was caspase dependent and activated death signaling via both the extrinsic apoptotic pathway and the intrinsic pathway. Death signaling was activated by c-Jun N-terminal kinase (JNK) signaling which led to Bcl-xL phosphorylation at serine 62, decreasing the anti-apoptotic activity of Bcl-xL, which contributed to the intrinsic pathway. The downregulation of cellular FLICE inhibitory protein long isoform (c-FLIPL) in the extrinsic pathway was accomplished through ubiquitination at lysine residue (K) 195 and protein synthesis inhibition. Overexpression of c-FLIPL mutant (K195R) and Bcl-xL mutant (S62A) completely abrogated the synergistic effect. The successful outcome of this study supports the application of multimodality strategy to patients with colorectal hepatic metastases who fail to respond to standard chemoradiotherapy that predominantly targets the mitochondrial apoptotic pathway. © 2013 Song et al

OPA1 and cardiolipin team up for mitochondrial fusion

Fusion between the inner membranes of two mitochondria requires the GTPase optic atrophy 1 (OPA1), but the molecular mechanism is poorly understood. A study now shows that fusion of two liposomes can be performed by OPA1 tethered to just one liposome, through an interaction with the phospholipid cardiolipin on the opposing liposome

Two-step method for instability damage detection in tower body of transmission structures

Author name used in this publication: Youlin Xu2012-2013 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Single pulse enhanced coherent diffraction imaging of bacteria with an X-ray free electron laser

High-resolution imaging offers one of the most promising approaches for exploring and understanding the structure and function of biomaterials and biological systems. X-ray free-electron lasers (XFELs) combined with coherent diffraction imaging can theoretically provide high-resolution spatial information regarding biological materials using a single XFEL pulse. Currently, the application of this method suffers from the low scattering cross-section of biomaterials and X-ray damage to the sample. However, XFELs can provide pulses of such short duration that the data can be collected using the "diffract and destroy" approach before the effects of radiation damage on the data become significant. These experiments combine the use of enhanced coherent diffraction imaging with single-shot XFEL radiation to investigate the cellular architecture of Staphylococcus aureus with and without labeling by gold (Au) nanoclusters. The resolution of the images reconstructed from these diffraction patterns were twice as high or more for gold-labeled samples, demonstrating that this enhancement method provides a promising approach for the high-resolution imaging of biomaterials and biological systems.1134Ysciescopu