688 research outputs found
Hot isostatic pressing of silicon nitride Sisub3n4 containing zircon, or zirconia and silica
A hydrothermal synthesis apparatus with a 10 KB cylinder was used to obtain a sintered body of silicon nitride. The sintering auxiliary agents used were zircon (ZrSiO4) and a mixture of zirconia (ZrO2) and silica (SiO2). Experiments were conducted with the amounts of ZrSi04 or ArO2 and SiO2 varying over a wide range and the results compared to discover the quantity of additive which produced sintering in silicon nitride by the hot pressing method
Achieving ground state and enhancing entanglement by recovering information
For cavity-assisted optomechanical cooling experiments, it has been shown in
the literature that the cavity bandwidth needs to be smaller than the
mechanical frequency in order to achieve the quantum ground state of the
mechanical oscillator, which is the so-called resolved-sideband or good-cavity
limit. We provide a new but physically equivalent insight into the origin of
such a limit: that is information loss due to a finite cavity bandwidth. With
an optimal feedback control to recover those information, we can surpass the
resolved-sideband limit and achieve the quantum ground state. Interestingly,
recovering those information can also significantly enhance the optomechanical
entanglement. Especially when the environmental temperature is high, the
entanglement will either exist or vanish critically depending on whether
information is recovered or not, which is a vivid example of a quantum eraser.Comment: 9 figures, 18 page
Prospects for improving the sensitivity of KAGRA gravitational wave detector
KAGRA is a new gravitational wave detector which aims to begin joint observation with Advanced LIGO and Advanced Virgo from late 2019. Here, we present KAGRA's possible upgrade plans to improve the sensitivity in the decade ahead. Unlike other state-of-the-art detectors, KAGRA requires different investigations for the upgrade since it is the only detector which employs cryogenic cooling of the test mass mirrors. In this paper, investigations on the upgrade plans which can be realized by changing the input laser power, increasing the mirror mass, and injecting frequency dependent squeezed vacuum are presented. We show how each upgrade affects to the detector frequency bands and also discuss impacts on gravitational-wave science. We then propose an effective progression of upgrades based on technical feasibility and scientific scenarios
Cryogenic and room temperature strength of sapphire jointed by hydroxide-catalysis bonding
Hydroxide-catalysis bonding is a precision technique used for jointing components in opto-mechanical systems and has been implemented in the construction of quasi-monolithic silica suspensions in gravitational wave detectors. Future detectors are likely to operate at cryogenic temperatures which will lead to a change in test mass and suspension material. One candidate material is mono-crystalline sapphire. Here results are presented showing the influence of various bonding solutions on the strength of the hydroxide-catalysis bonds formed between sapphire samples, measured both at room temperature and at 77 K, and it is demonstrated that sodium silicate solution is the most promising in terms of strength, producing bonds with a mean strength of 63 MPa. In addition the results show that the strengths of bonds were undiminished when tested at cryogenic temperatures
Quantum noise in laser-interferometer gravitational-wave detectors with a heterodyne readout scheme
We analyze and discuss the quantum noise in signal-recycled laser
interferometer gravitational-wave detectors, such as Advanced LIGO, using a
heterodyne readout scheme and taking into account the optomechanical dynamics.
Contrary to homodyne detection, a heterodyne readout scheme can simultaneously
measure more than one quadrature of the output field, providing an additional
way of optimizing the interferometer sensitivity, but at the price of
additional noise. Our analysis provides the framework needed to evaluate
whether a homodyne or heterodyne readout scheme is more optimal for second
generation interferometers from an astrophysical point of view. As a more
theoretical outcome of our analysis, we show that as a consequence of the
Heisenberg uncertainty principle the heterodyne scheme cannot convert
conventional interferometers into (broadband) quantum non-demolition
interferometers.Comment: 16 pages, 8 figure
Experimental investigation of a control scheme for a zero-detuning resonant sideband extraction interferometer for next-generation gravitational-wave detectors
Some next-generation gravitational-wave detectors, such as the American
Advanced LIGO project and the Japanese LCGT project, plan to use power recycled
resonant sideband extraction (RSE) interferometers for their interferometer's
optical configuration. A power recycled zero-detuning (PRZD) RSE
interferometer, which is the default design for LCGT, has five main length
degrees of freedom that need to be controlled in order to operate a
gravitational-wave detector. This task is expected to be very challenging
because of the complexity of optical configuration. A new control scheme for a
PRZD RSE interferometer has been developed and tested with a prototype
interferometer. The PRZD RSE interferometer was successfully locked with the
control scheme. It is the first experimental demonstration of a PRZD RSE
interferometer with suspended test masses. The result serves as an important
step for the operation of LCGT.Comment: 6 pages, 9 figrue
Quantum Measurement Theory in Gravitational-Wave Detectors
The fast progress in improving the sensitivity of the gravitational-wave (GW)
detectors, we all have witnessed in the recent years, has propelled the
scientific community to the point, when quantum behaviour of such immense
measurement devices as kilometer-long interferometers starts to matter. The
time, when their sensitivity will be mainly limited by the quantum noise of
light is round the corner, and finding the ways to reduce it will become a
necessity. Therefore, the primary goal we pursued in this review was to
familiarize a broad spectrum of readers with the theory of quantum measurements
in the very form it finds application in the area of gravitational-wave
detection. We focus on how quantum noise arises in gravitational-wave
interferometers and what limitations it imposes on the achievable sensitivity.
We start from the very basic concepts and gradually advance to the general
linear quantum measurement theory and its application to the calculation of
quantum noise in the contemporary and planned interferometric detectors of
gravitational radiation of the first and second generation. Special attention
is paid to the concept of Standard Quantum Limit and the methods of its
surmounting.Comment: 147 pages, 46 figures, 1 table. Published in Living Reviews in
Relativit
- …