Breeding Sustainable Beef Cows: Reducing Weight and Increasing Productivity

Programs for sustainable beef production are established, but the specific role of beef cows in these systems is not well defined. This work characterized cows for two traits related to sustainability, cow weight (CW) and cumulative weight weaned (WtW). Cow weight indicates nutrient requirements and enteric methane emissions. Cumulative weight weaned reflects reproductive performance and avoidance of premature culling for characteristics related to animal health, welfare, and worker safety. Both traits were evaluated with random regression models with records from a crossbred population representing 18 breeds that conduct US national cattle evaluations. The genomic REML analyses included additive and dominance components, with relationships among 22,776 animals constructed from genotypes of 181,286 potentially functional variants imputed from a low-pass sequence. Projected to 8 years of age, the additive heritability estimate for CW was 0.57 and 0.11 for WtW. Dominance heritability was 0.02 for CW and 0.19 for WtW. Many variants with significant associations with CW were within previously described quantitative trait loci (QTL) for growthrelated production, meat, and carcass traits. Significant additive WtW variants were covered by QTL for traits related to reproduction and structural soundness. All breeds contributed to groups of cows with high and low total genetic values (additive + dominance effects) for both traits. The high WtW cows and cows above the WtW mean but below the CW mean had larger heterosis values and fewer bases in runs of homozygosity. The high additive heritability of CW and dominance effects on WtW indicate that breeding to improve beef cow sustainability should involve selection to reduce CW and mate selection to maintain heterosis and reduce runs of homozygosity. Simple Summary: Improving the sustainability of beef cows involves reducing feed costs and enteric methane emissions and increasing calf production while addressing concerns including animal health and welfare and worker safety. Reducing cow weight can favorably impact feed costs and methane emissions. Cumulative weight weaned observed throughout a cow’s productive life directly addresses calf production and indirectly addresses other concerns—cumulative production is higher for cows who wean healthy calves and avoid culling because of reproductive failure, unsoundness, and dangerous behavior. Using functional variant genotypes imputed from the low-coverage whole genome sequence, this examination of cow weight and cumulative weight weaned in a herd of crossbred cattle resulted in additive heritability estimates of 0.57 for cow weight and 0.11 for weight weaned by 8-year-old cows. Corresponding dominance heritability estimates were 0.02 for cow weight and 0.19 for weight weaned. All breeds were represented by cows projected to have high and low cow weights and weight weaned. Heterosis was higher and genomic inbreeding, measured by runs of homozygosity, was lower among high-weight weaned cows. These results suggest selection should be effective in reducing cow weight. Selection to increase weight weaned will be slow but can be hastened with crossbreeding. Especially when pedigree is not available to estimate heterosis, runs of homozygosity may be a useful indicator of heterosis and a predictor of cumulative productivity. Beef cow sustainability can be improved with appropriate crossbreeding and selection, and may be accelerated by incorporating functional variants associated with sustainability-related traits

Breed and heterotic effects for mature weight in beef cattle

Cow mature weight (MWT) is heritable and affects the costs and efficiency of a breeding operation. Cow weight is also influenced by the environment, and the relationship between the size and profitability of a cow varies depending on production system. Producers, therefore, need tools to incorporate MWT in their selection of cattle breeds and herd replacements. The objective of this study was to estimate breed and heterotic effects for MWT using weight-age data on crossbred cows. Cow\u27s MWT at 6 yr was predicted from the estimated parameter values-asymptotic weight and maturation constant (k)-from the fit of the Brody function to their individual data. Values were obtained for 5,156 crossbred cows from the U.S. Meat Animal Research Center (USMARC) Germplasm Evaluation Program using 108,957 weight records collected from approximately weaning up to 6 yr of age. The cows were produced from crosses among 18 beef breeds. A bivariate animal model was fitted to the MWT and k obtained for each cow. The fixed effects were birth year-season contemporary group and covariates of direct and maternal breed fractions, direct and maternal heterosis, and age at final weighing. The random effects were direct additive and residual. A maternal additive random effect was also fitted for k. In a separate analysis from that used to estimate breed effects and (co)variances, cow MWT was regressed on sire yearling weight (YWT) Expected Progeny Differences by its addition as a covariate to the animal model fitted for MWT. That regression coefficient was then used to adjust breed solutions for sire selection in the USMARC herd. Direct heterosis was 15.3 ± 2.6 kg for MWT and 0.000118 ± 0.000029 d-1 for k. Maternal heterosis was -5.7 ± 3.0 kg for MWT and 0.000130 ± 0.000035 d-1 for k. Direct additive heritabilities were 0.56 ± 0.03 for MWT and 0.23 ± 0.03 for k. The maternal additive heritability for k was 0.11 ± 0.02. The direct additive correlation between MWT and k was negligible (0.08 ± 0.09). Adjusted for sire sampling, Angus was heaviest at maturity of the breeds compared. Deviations from Angus ranged from -8.9 kg (Charolais) to -136.7 kg (Braunvieh). Ordered by decreasing MWT, the breeds ranked Angus, Charolais, Hereford, Brahman, Salers, Santa Gertrudis, Simmental, Maine Anjou, Limousin, Red Angus, Brangus, Chiangus, Shorthorn, Gelbvieh, Beefmaster, and Braunvieh. These breed effects for MWT can inform breeding programs where cow size is considered a key component of the overall profitability

Comparison of different functions to describe growth from weaning to maturity in crossbred beef cattle

Cow mature weight (MWT) has increased in the past 30 yr. Larger cows cost more to maintain, but their efficiency—and thus profitability— depends on the production environment. Incorporating MWT effectively into selection and mating decisions requires understanding of growth to maturity. The objective of this study was to describe growth to maturity in crossbred beef cattle using Brody, spline, and quadratic functions. Parameter estimates utilized data on crossbred cows from cycle VII and continuous sampling phases of the Germplasm Evaluation Program at the U.S. Meat Animal Research Center. The MWT were estimated at 6 yr from the fitted parameters obtained from the Brody (BMWT), spline (SMWT), and quadratic (QMWT) functions. These were defined as BMWT, SMWT, and QMWT for the Brody, spline, and quadratic functions, respectively. Key parameters from the Brody function were BMWT and maturing constant. The spline was fitted as piecewise linear where the two linear functions joined at a knot. Key parameters were knot position and SMWT. For the quadratic model, the main parameter considered was QMWT. Data were scaled for fitting such that 180 d was the y-intercept with the average weight at 180 d (214.3 kg) subtracted from all weights. Weights were re-expressed by adding 214.3 kg after analysis. Once data were edited, with outliers removed, there were parameter estimates for 5,156, 5,041, and 4,905 cows for the Brody, spline, and quadratic functions, respectively. The average maturing constant (SD) was 0.0023 d−1 (0.0008 d−1). The mean MWT estimates (SD) from the Brody, spline, and quadratic functions were 650.0 kg (64.0 kg), 707.3 kg (79.8 kg), and 597.8 kg (116.7 kg), respectively. The spline function had the highest average R2 value when fit to individual cows’ data. However, the Brody function produced more consistent MWT estimates regardless of the timeframe of data available and produced the fewest extreme MWT. For the spline and quadratic functions, weights through 4 and 5 yr of age, respectively, were needed before consistent estimates of MWT were obtained. Of the three functions fitted, the Brody was best suited for estimating MWT at a later age in crossbred beef cattle

Comparison of different functions to describe growth from weaning to maturity in crossbred beef cattle

Cow mature weight (MWT) has increased in the past 30 yr. Larger cows cost more to maintain, but their efficiency—and thus profitability— depends on the production environment. Incorporating MWT effectively into selection and mating decisions requires understanding of growth to maturity. The objective of this study was to describe growth to maturity in crossbred beef cattle using Brody, spline, and quadratic functions. Parameter estimates utilized data on crossbred cows from cycle VII and continuous sampling phases of the Germplasm Evaluation Program at the U.S. Meat Animal Research Center. The MWT were estimated at 6 yr from the fitted parameters obtained from the Brody (BMWT), spline (SMWT), and quadratic (QMWT) functions. These were defined as BMWT, SMWT, and QMWT for the Brody, spline, and quadratic functions, respectively. Key parameters from the Brody function were BMWT and maturing constant. The spline was fitted as piecewise linear where the two linear functions joined at a knot. Key parameters were knot position and SMWT. For the quadratic model, the main parameter considered was QMWT. Data were scaled for fitting such that 180 d was the y-intercept with the average weight at 180 d (214.3 kg) subtracted from all weights. Weights were re-expressed by adding 214.3 kg after analysis. Once data were edited, with outliers removed, there were parameter estimates for 5,156, 5,041, and 4,905 cows for the Brody, spline, and quadratic functions, respectively. The average maturing constant (SD) was 0.0023 d−1 (0.0008 d−1). The mean MWT estimates (SD) from the Brody, spline, and quadratic functions were 650.0 kg (64.0 kg), 707.3 kg (79.8 kg), and 597.8 kg (116.7 kg), respectively. The spline function had the highest average R2 value when fit to individual cows’ data. However, the Brody function produced more consistent MWT estimates regardless of the timeframe of data available and produced the fewest extreme MWT. For the spline and quadratic functions, weights through 4 and 5 yr of age, respectively, were needed before consistent estimates of MWT were obtained. Of the three functions fitted, the Brody was best suited for estimating MWT at a later age in crossbred beef cattle

Genetic changes in beef cow traits following selection for calving ease

One approach to reducing calving difficulty is to select heifers with higher breeding value for calving ease. Calving ease is often associated with lower birth weight and that may result in other possible effects on lifetime productivity. Females from experimental select and control calving ease lines within each of the seven populations were compared. Random samples of 720 heifers from lines selected for better calving ease breeding values and 190 heifers from control lines selected for average birth weights were followed through four parities. Select and control lines within the same population were selected to achieve similar yearling weight breeding values. Weights of sampled heifers in select lines were 2.6 kg (P \u3c 0.01) lighter at birth but not different from control lines at weaning. Select lines had significantly shorter hip height, lighter mature weight, and greater calving success at second parity. Their calves were born significantly earlier with lighter weights and less assistance. Significant interactions with parity showed fewer calves assisted and greater calf survival to weaning as heifers but negligible differences with control lines in later parities. Steer progeny sampled from these dams in select lines (n = 204) were not different from steers in control lines (n = 91) for hot carcass weight but had significantly greater fat depth. Two production systems were compared considering the seven populations as replicates. The systems differed in selection history of females (select and control lines) and the use of bulls within their lines as young cows, but used the same bulls in both lines as older cows. Cows were culled after single unsuccessful breeding and kept for up to four parities. Select line cows tended (P ≤ 0.10) to wean more calves and stay in the herd longer. They were assisted significantly fewer times at calving and had greater calf weight gain to weaning when evaluated over their herd life. Mature weights were lighter in select lines, but marketable cow weight from the systems was nearly identical. Control lines did have more marketable young cow weight and select lines older cow weight. Weaned calf weight per heifer starting the system was significantly greater for the select heifer system due to greater survival of calves from heifers and greater calving success at second parity. No important unfavorable effects of genetic differences in calving ease were identified in this experiment

Genetic parameters, heterosis, and breed effects for body condition score and mature cow weight in beef cattle

Understanding the genetic relationship between mature cow weight (MWT) and body condition score (BCS) is useful to implement selection programs focused on cow efficiency. The objectives of this study were to estimate genetic parameters, heterosis, and breed effects for MWT and BCS. In total, 25,035 and 24,522 overlapping records were available for MWT and BCS on 6,138 and 6,131 cows, respectively, from the Germplasm Evaluation program, a crossbred beef population at the U.S. Meat Animal Research Center. Pedigree was available for 48,013 individuals. Univariate animal models were used to estimate heritabilities for each trait by parity. Bivariate animal models were used to estimate genetic correlations between parities within a trait and between traits within parities. Bivariate repeatability animal models were used to estimate genetic correlations between traits across parities. Estimates of heritability for different parities ranged from 0.43 ± 0.05 to 0.55 ± 0.07 for MWT and from 0.12 ± 0.03 to 0.25 ± 0.04 for BCS and were lower with the repeatability model at 0.40 ± 0.02 and 0.11 ± 0.01 for MWT and BCS, respectively. Estimates of repeatability were high for MWT (0.67 ± 0.005) and low for BCS (0.22 ± 0.006). Estimates of genetic correlation for MWT and BCS between parities were, in general, high, especially between consecutive parities. Estimates of genetic correlation between MWT and BCS were positive and moderate, ranging from 0.32 ± 0.09 to 0.68 ± 0.14. The direct heterosis estimates were 21.56 ± 3.53 kg (P ≤ 0.001) for MWT and 0.095 ± 0.034 (P ≤ 0.001) for BCS. Ordered by decreasing MWT, the breeds ranked Brahman, Charolais, Angus, Simmental, Salers, Hereford, Santa Gertrudis, Chiangus, Brangus, Red Angus, Shorthorn, Maine-Anjou, Gelbvieh, Beefmaster, Limousin, and Braunvieh. Ordered by decreasing BCS, the breeds ranked Brahman, Red Angus, Charolais, Angus, Hereford, Brangus, Beefmaster, Chiangus, Salers, Simmental, Maine-Anjou, Limousin, Santa Gertrudis, Shorthorn, Gelbvieh, and Braunvieh. Estimates of breed differences for MWT were also adjusted for BCS (AMWT), and in general, AMWT depicted smaller differences between breeds with some degree of re-ranking (r = 0.59). These results suggest that MWT and BCS are at least moderately genetically correlated and that they would respond favorably to selection. Estimates of breed differences and heterotic effects could be used to parameterize multibreed genetic evaluations for indicators of cow maintenance energy requirements

Profile of the Spleen Transcriptome in Beef Steers with Variation in Gain and Feed Intake

We have previously identified components of the immune system contributing to feed intake and gain in both the rumen and small intestine of beef steers. In this study, we examined the spleen, a major lymphatic organ near the digestive tract, to determine whether it was also influencing individual feed efficiency status through immune responses. Animals (n=16) that were divergent for gain and intake were selected for tissue sampling. The spleen transcriptomes were evaluated by microarray. A total of 1,216 genes were identified as differentially expressed. Genes were over-represented in Kyoto encyclopedia of genes and genomes (KEGG) pathways including biological regulation, protein folding, cell communication, immune systems process, response to stress and RNA metabolic process. Several stress response or heat shock genes including HSPH1, HSPA1A, HSPA4, DNAJB4, DNAJA4, etc., were identified as a stress response functional gene cluster in the low gain-low intake animals. These genes were up-regulated amongst the low gain-low intake animals compared to all other groups. Canonical pathways associated with the differentially expressed genes included the coagulation system, extrinsic prothrombin activation, protein ubiquitination, unfolded protein response and aldosterone signaling in epithelial cells. An analysis of expressed copy number variable (CNV) genes in the spleen produced some of the same genes and gene families that were differentially expressed. Our data suggests the splenic contribution to some of the underlying variation among gain and intake within this group of animals may be a result of immune function and stress response. In addition, some of the differences in immune response functions may be related to gene copy number

The accuracies of DNA-based estimates of genetic merit derived from Angus or multibreed beef cattle training populations

Several organizations have developed prediction models for molecular breeding values (MBV) for quantitative growth and carcass traits in beef cattle using Bovine SNP50 genotypes and phenotypic or EBV data. Molecular breeding values for Angus cattle have been developed by IGENITY, Pfi zer Animal Genetics, and a collaboration between researchers from Iowa State University and the University of Missouri-Columbia (ISU/UMC). The U.S. Meat Animal Research Center (USMARC; Clay Center, NE) has also developed MBV for 16 cattle breeds using 2 multibreed populations, the Germplasm Evaluation (GPE) Program and the 2,000 Bull Project (2KALL), and 2 single breed subpopulations of the 2,000 Bull Project, Angus (2KAN) and Hereford (2KHH). In this study, these MBV were assessed relative to commercial ranch EBV estimated from the progeny phenotypes of Angus bulls naturally mated in multisire breeding pastures to commercial cows: 121 for USMARC MBV, 99 for ISU/UMC MBV, and 29 for IGENITY and Pfizer MBV (selected based on number of progeny carcass records). Five traits were analyzed: weaning weight (WW), HCW, marbling score (MS), rib-eye muscle area (RE), and, for IGENITY and Pfi zer only, feedlot ADG. The average accuracies of MBV across traits were 0.38 ± 0.05 for IGENITY, 0.61 ± 0.12 for Pfizer, 0.46 ± 0.12 for ISU/UMC, 0.16 ± 0.04 for GPE, 0.26 ± 0.05 for 2KALL, 0.24 ± 0.04 for 2KAN, and 0.02 ± 0.12 for 2KHH. Angus-based MBV (IGENITY, Pfizer, ISU/UMC, and 2KAN) explained larger proportions of genetic variance in this population than GPE, 2KALL, or 2KHH MBV for the same traits. In this data set, IGENITY, Pfizer, and ISU/UMC MBV were predictive of realized performance of progeny, and incorporation of that information into national genetic evaluations would be expected to improve EPD accuracy, particularly for young animals

Integrating linkage and radiation hybrid mapping data for bovine chromosome 15

BACKGROUND: Bovine chromosome (BTA) 15 contains a quantitative trait loci (QTL) for meat tenderness, as well as several breaks in synteny with human chromosome (HSA) 11. Both linkage and radiation hybrid (RH) maps of BTA 15 are available, but the linkage map lacks gene-specific markers needed to identify genes underlying the QTL, and the gene-rich RH map lacks associations with marker genotypes needed to define the QTL. Integrating the maps will provide information to further explore the QTL as well as refine the comparative map between BTA 15 and HSA 11. A recently developed approach to integrating linkage and RH maps uses both linkage and RH data to resolve a consensus marker order, rather than aligning independently constructed maps. Automated map construction procedures employing this maximum-likelihood approach were developed to integrate BTA RH and linkage data, and establish comparative positions of BTA 15 markers with HSA 11 homologs. RESULTS: The integrated BTA 15 map represents 145 markers; 42 shared by both data sets, 36 unique to the linkage data and 67 unique to RH data. Sequence alignment yielded comparative positions for 77 bovine markers with homologs on HSA 11. The map covers approximately 32% of HSA 11 sequence in five segments of conserved synteny, another 15% of HSA 11 is shared with BTA 29. Bovine and human order are consistent in portions of the syntenic segments, but some rearrangement is apparent. Comparative positions of gene markers near the meat tenderness QTL indicate the region includes separate segments of HSA 11. The two microsatellite markers flanking the QTL peak are between defined syntenic segments. CONCLUSIONS: Combining data to construct an integrated map not only consolidates information from different sources onto a single map, but information contributed from each data set increases the accuracy of the map. Comparison of bovine maps with well annotated human sequence can provide useful information about genes near mapped bovine markers, but bovine gene order may be different than human. Procedures to connect genetic and physical mapping data, build integrated maps for livestock species, and connect those maps to more fully annotated sequence can be automated, facilitating the maintenance of up-to-date maps, and providing a valuable tool to further explore genetic variation in livestock

Anti-apoptotic seminal vesicle protein IV inhibits cell-mediated immunity.

The in vitro effect of seminal vesicle protein IV (SV-IV) on the cytotoxic activity of human natural or acquired cellular immunity has been investigated by standard immunological procedures, a 51Cr-release cytotoxicity assay, and labeled-ligand binding experiments. The data obtained demonstrate that: (1) fluoresceinated or [125I]-labeled SV-IV binds specifically to the surface of human purified non-adherent monuclear cells (NA-MNC); (2)SV-IV suppresses the cytotoxicity of natural killer (NK) cells against K562 target cells, that of IL-2-stimulated NK (LAK) cells against DAUDI target cells, and that of VEL antigen-sensitized cytotoxic T lymphocytes (CTLs) against VEL target cells; (3) treatment of K562 target cells alone with SV-IV decreases their susceptibility to NK-induced lysis. These findings indicate that the protein SV-IV has a marked in vitro inhibitory effect on NK, LAK and CTL cytotoxicity, providing a better understanding of its immune regulatory functions