Fabrication of a single mode laser by UV-writing in neodymium doped silica-on-silicon

We describe the fabrication of a waveguide laser by UV-writing in neodymium doped silica-on-silicon. The substrate is fabricated by Flame Hydrolysis Deposition and solution doping techniques. Lasing at 1048-1056nm was observed with a slope efficiency of 33% and threshold of 4mW for the transition. Lasing was also observed at 1356nm

The effects of man-marking on work intensity in small-sided soccer games

The aim of this study was to examine the effect of manipulating defensive rules: with and without man-marking (MM and NMM) on exercise intensity in 3 vs. 3 small-sided games (SSGs). Twelve adolescent soccer players (age: 16.2 ± 0.7 years; body mass: 55.7 ± 6.4 kg; body height: 1.70 ± 0.07 m) participated in this repeated measures study. Each participant performed in four different SSGs formats: 3 vs. 3 MM with and without goals and 3 vs. 3 NMM with and without goals. Each SSG lasted 3 x 4 minutes interspersed with 4 minutes passive recovery. The percentage heart rate reserve (%HRreserve) was recorded continuously during SSG and session-rating of perceived exertion (session-RPE) after the SSG. MANOVA showed that defensive rule had significant effects on intensity (F = 5.37, p < 0.01). Specifically, MM during SSG induced significantly higher %HRreserve compared to NMM (Goal: 80.5 vs. 75.7%; No goal: 80.5 vs. 76.1%; p < 0.05, effect size = 0.91-1.06), irrespective of the presence or absence of goals. However, only MM with the presence of goals induced significant higher session-RPE compared to NMM (7.1 vs. 6.0; p < 0.05, effect size = 1.36), whereas no difference in session-RPE was observed between MM and NMM (7.4 vs. 6.9; p > 0.05, effect size = 0.63) when no goals were used. Higher intra-class reliability and lower coefficient of variation values were also reported in MM as compared to NMM. This study in youth soccer players shows there is ~4.5% increase in heart rate response by using the man-marking in 3 vs. 3 SSG thus the intensity of SSG can be significantly increased when using man-marking tactics

Photoelectron diffraction: from phenomenological demonstration to practical tool

The potential of photoelectron diffraction—exploiting the coherent interference of directly-emitted and elastically scattered components of the photoelectron wavefield emitted from a core level of a surface atom to obtain structural information—was first appreciated in the 1970s. The first demonstrations of the effect were published towards the end of that decade, but the method has now entered the mainstream armoury of surface structure determination. This short review has two objectives: First, to outline the way that the idea emerged and the way this evolved in my own collaboration with Neville Smith and his colleagues at Bell Labs in the early years: Second, to provide some insight into the current state-of-the art in application of (scanned-energy mode) photoelectron diffraction to address two key issue in quantitative surface structure determination, namely, complexity and precision. In this regard a particularly powerful aspect of photoelectron diffraction is its elemental and chemical-state specificity

Marine benthic flora and fauna of Gourdon Bay and the Dampier Peninsula in the Kimberley region of North-Western Australia

Surveys undertaken to characterise the marine benthic habitats along the Dampier Peninsula and further south at Gourdon Bay in the Kimberley region of Western Australia were augmented with epibenthic sled sampling of soft and hard bottom habitats. This paper describes the species collected, their biomass and relative abundance for the main groups of marine macrophytes and invertebrates. Five localities were surveyed; Gourdon Bay, Quondong Point to Coulomb Point, Carnot Bay to Beagle Bay, Perpendicular Head and Packer Island. Sampling was limited to fifteen epibenthic dredge operations from a range of habitat types and was designed to target the most common habitat types and to obtain species identifications of the most important species and those which typified different habitat types. Surveys covered a total of 1,350 m 2 of seabed in depths between 11 and 23m. We identified 415 taxa comprising: 1 seagrass, 43 algae, 52 sponges, 30 ascidians, 10 hydroids, 14 scleractinian corals, 52 other cnidarians, 69 crustaceans, 73 molluscs and 71 echinoderms. Despite the limited nature of the sampling, a significant number of new species, range extensions and new records for Western Australia and Australia were recorded. Within the algae, one range extension (Halimeda cf. cuneata f. digitata not previously recorded in Western Australia) and one possible new species of Areschougia were recorded. Two range extensions were present in the ascidians; the solitary ascidian Polycarpa cf. intonata has previously only been recorded in Queensland and Cnemidocarpa cf. radicosa only in temperate Australian waters. There were several range extensions for the crustacea, for example, the sponge crab, Tumidodromia dormia, has only been recorded in Queensland. One species of holothurian of the genus Phyllophorus could not be identified from the literature available and may represent a new species. Similarly, a small species of the echinoid Gymnechinus could possibly be a new species. The collections of hydroids, hard corals, crinoids and molluscs contained no new species or range extensions. There was difficulty in identification of some groups to species level due to the status of the current taxonomic literature (e.g. Cnidaria, Porifera and ascidians) and there may be a number of new species among the material collected. Among the anthozoa, there is at least one new species of Chromonephthea and potentially 10 range extensions to Western Australia. Sinularia cf. acuta and Chromonephthea curvata are both new records for Australia with both previously recorded in Indonesia only. Among the better known taxa (e.g. molluscs, echinoderms, corals), most of the taxa identified to species level have been recorded to occur throughout north-western Australia, however the diversity recorded in this study is less than other parts of the Kimberley and this is almost certainly a result of the small overall area sampled and the single method of collection utilised. The most important species on soft bottom habitats in terms of biomass was the heart urchin Breynia desorii (up to 326 g.m -2). Sponges were the dominant fauna by biomass (up to 620 g.m -2) on hard bottom habitats and biomass was dominated a by a few large cup and massive sponge species (e.g. Pione velans and two unidentified Spheciospongia). The biomass of other filter feeders, especially ascidians (e.g. Aplidium cf. crateriferum), soft corals (e.g. Chromonephthea spp.), gorgonians (e.g. Junceella fragilis and Dichotella gemmacea) was also high, indicating the importance of these groups in characterising hard bottom habitats. Although low in biomass, crinoids such as Comaster multifidus and Comatula pectinata were abundant in samples that included a high biomass of other filter feeders

Risk factors associated with lambing traits

peer-reviewedThis article was first published in Animal (2016), 10:1, pp 89–95, © The Animal Consortium 2015The objective of this study was to establish the risk factors associated with both lambing difficulty and lamb mortality in the Irish sheep multibreed population. A total of 135 470 lambing events from 42 675 ewes in 839 Irish crossbred and purebred flocks were available. Risk factors associated with producer-scored ewe lambing difficulty score (scale of one (no difficulty) to four (severe difficulty)) were determined using linear mixed models. Risk factors associated with the logit of the probability of lamb mortality at birth (i.e. binary trait) were determined using generalised estimating equations. For each dependent variable, a series of simple regression models were developed as well as a multiple regression model. In the simple regression models, greater lambing difficulty was associated with quadruplet bearing, younger ewes, of terminal breed origin, lambing in February; for example, first parity ewes experienced greater (P7.0 kg) birth weights, quadruplet born lambs and lambs that experienced a more difficult lambing (predicted probability of death for lambs that required severe and veterinary assistance of 0.15 and 0.32, respectively); lambs from dual-purpose breeds and born to younger ewes were also at greater risk of mortality. In the multiple regression model, the association between ewe parity, age at first lambing, year of lambing and lamb mortality no longer persisted. The trend in solutions of the levels of each fixed effect that remained associated with lamb mortality in the multiple regression model, did not differ from the trends observed in the simple regression models although the differential in relative risk between the different lambing difficulty scores was greater in the multiple regression model. Results from this study show that many common flock- and animal-level factors are associated with both lambing difficulty and lamb mortality and management of different risk category groups (e.g. scanned litter sizes, ewe age groups) can be used to appropriately manage the flock at lambing to reduce their incidence

What do near-term observations tell us about long-term developments in greenhouse gas emissions? A letter

Long-term scenarios developed by integrated assessment models are used in climate research to provide an indication of plausible long-term emissions of greenhouse gases and other radiatively active substances based on developments in the global energy system, land-use and the emissions associated with these systems The phenomena that determine these long-term developments (several decades or even centuries) are very different than those that operate on a shorter time-scales (a few years) Nevertheless, in the literature, we still often find direct comparisons between short-term observations and long-term developments that do not take into account the differing dynamics over these time scales In this letter, we discuss some of the differences between the factors that operate in the short term and those that operate in the long term We use long-term historical emissions trends to show that short-term observations are very poor indicators of long-term future emissions developments Based on this, we conclude that the performance of long-term scenarios should be evaluated against the appropriate, corresponding long-term variables and trends The research community may facilitate this by developing appropriate data sets and protocols that can be used to test the performance of long-term scenarios and the models that produce the

Human Arm simulation for interactive constrained environment design

During the conceptual and prototype design stage of an industrial product, it is crucial to take assembly/disassembly and maintenance operations in advance. A well-designed system should enable relatively easy access of operating manipulators in the constrained environment and reduce musculoskeletal disorder risks for those manual handling operations. Trajectory planning comes up as an important issue for those assembly and maintenance operations under a constrained environment, since it determines the accessibility and the other ergonomics issues, such as muscle effort and its related fatigue. In this paper, a customer-oriented interactive approach is proposed to partially solve ergonomic related issues encountered during the design stage under a constrained system for the operator's convenience. Based on a single objective optimization method, trajectory planning for different operators could be generated automatically. Meanwhile, a motion capture based method assists the operator to guide the trajectory planning interactively when either a local minimum is encountered within the single objective optimization or the operator prefers guiding the virtual human manually. Besides that, a physical engine is integrated into this approach to provide physically realistic simulation in real time manner, so that collision free path and related dynamic information could be computed to determine further muscle fatigue and accessibility of a product designComment: International Journal on Interactive Design and Manufacturing (IJIDeM) (2012) 1-12. arXiv admin note: substantial text overlap with arXiv:1012.432

An energy vision for a planet under pressure

Worldwide, global energy systems face an array of challenges, from access for the poor to reliability and security. Meanwhile, the provision of energy creates local human and ecological health impacts as well as dangerous global climate change. Addressing these issues simultaneously will require a fundamental transformation of the energy system. Recent assessments show that such a transformation is achievable in technological and economic terms, but it will present formidable supply- and demand-side challenges as well as problems of governance, transparency and reliability across scales. This policy brief presents a long-term vision for the energy system and describes the elements required for the transition towards this vision. To succeed, this transformation must integrate several key components, including a focus on high levels of energy efficiency and the scale up of investments in technology deployment as well as research, development and demonstration (RD&D)

Dissipation of vibration in rough contact

The relationship which links the normal vibration occurring during the sliding of rough surfaces and the nominal contact area is investigated. Two regimes are found. In the first one, the vibrational level does not depend on the contact area, while in the second one, it is propor- tional to the contact area. A theoretical model is proposed. It is based on the assumption that the vibrational level results from a competition between two processes of vibration damping, the internal damping of the material and the contact damping occurring at the interface