32 research outputs found

    Plasma Profiles & Flows in the High-Field Side Scrape-off Layer in Alcator C-Mod

    Get PDF

    Plasma flows in the Alcator C-Mod scrape-off layer

    Get PDF
    Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, February 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 227-234).Near-sonic parallel plasma flows are persistently observed in the scrape-off layer (SOL) of tokamaks, at locations far from material surfaces. Ballooning-like transport asymmetries are thought to be a principal driver for the strong parallel flows, a hypothesis supported by the observation of steep high-field side pressure profiles in double-null discharges. Yet parallel flow can also arise as a result of toroidal plasma rotation and/or neoclassical Pfirsch-Schliiter currents. In addition, the mechanism that closes the mass-flow loop back onto itself has remained elusive. To investigate these phenomena, a novel magnetically-actuated scanning probe has been deployed on the high-field side in Alcator C-Mod. This probe, along with two other scanning probes on the low-field side, measure the total plasma flow vector at these locations: parallel flows, perpendicular E_r x B drifts and radial fluctuation-induced particle fluxes. Boundary layer flows have been systematically examined as magnetic topology (upper versus lower-null) and plasma density were changed. It is found that the plasma flow pattern can be decomposed into two principal parts: (1) a drift-driven component, which lies within a magnetic flux surface and is divergence-free and (2) a transport-driven component which gives rise to parallel flows on the high-field side scrape-off layer.(cont.) Toroidal rotation, Pfirsch-Schlilter and transport-driven contributions are unambiguously identified. Parallel flows are found to dominate the high-field particle fluxes; the total poloidally-directed flow carries one half of the particle flux arriving on the inner divertor. As a result, convection is also found to be an important player in high-field side heat transport. In contrast, E_r x B plus parallel flows yield a mostly-toroidal flow component in the low-field SOL. The magnitude of the transport-driven flow component is found to be quantitatively consistent with radial fluctuation-induced particle fluxes measured on the low-field side, identifying this as the primary driver. In contrast, fluctuation-induced flux measurements on the high-field side midplane are found to be essentially zero, thereby excluding an 'inward pinch' effect as the mechanism that closes the mass-flow loop in this region.by Noah M. Smick.Ph.D

    Oblique ion collection in the drift-approximation: how magnetized Mach-probes really work

    Get PDF
    The anisotropic fluid equations governing a frictionless obliquely-flowing plasma around an essentially arbitrarily shaped three-dimensional ion-absorbing object in a strong magnetic field are solved analytically in the quasi-neutral drift-approximation, neglecting parallel temperature gradients. The effects of transverse displacements traversing the magnetic presheath are also quantified. It is shown that the parallel collection flux density dependence upon external Mach-number is ncsexp[1(MMcotθ)]n_\infty c_s \exp[-1 -(M_{\parallel\infty}- M_\perp\cot\theta)] where θ\theta is the angle (in the plane of field and drift velocity) of the object-surface to the magnetic-field and MM_{\parallel\infty} is the external parallel flow. The perpendicular drift, \M_\perp, appearing here consists of the external \E\wedge\B drift plus a weighted sum of the ion and electron electron diamagnetic drifts that depends upon the total angle of the surface to the magnetic field. It is that somewhat counter-intuitive combination that an oblique (transverse) Mach probe experiment measures.Comment: Revised version following refereeing for Physics of Plasma

    Transport and drift-driven plasma flow components in the Alcator C-Mod boundary plasma

    Get PDF
    Boundary layer flows in the Alcator C-Mod tokamak are systematically examined as magnetic topology (upper versus lower-null) and plasma density are changed. Utilizing a unique set of scanning Langmuir–Mach probes, including one on the high-field side (HFS) midplane, the poloidal variation of plasma flow components in the parallel, diamagnetic and radial directions are resolved in detail. It is found that the plasma flow pattern can be decomposed into two principal parts: (1) a drift-driven component, which lies within a magnetic flux surface and is divergence-free and (2) a transport-driven component, which gives rise to near-sonic parallel flows on the HFS scrape-off layer (SOL). Toroidal rotation, Pfirsch–Schlüter and transport-driven contributions are unambiguously identified. Transport-driven parallel flows are found to dominate the HFS particle fluxes; the total poloidal-directed flow accounts for ~1/3 to all of the ion flux arriving on the inner divertor. As a result, heat convection is found to be an important player in this region, consistent with the observation of divertor asymmetries that depend on the direction of B × ∇B relative to the active x-point. In contrast, the poloidal projection of parallel flow in the low-field SOL largely cancels with E[subscript r] × B flow; toroidal rotation is the dominant plasma motion there. The magnitude of the transport-driven poloidal flow is found to be quantitatively consistent with fluctuation-induced radial particle fluxes on the low-field side (LFS), identifying this as the primary drive mechanism. Fluctuation-induced fluxes on the HFS are found to be essentially zero, excluding turbulent inward transport as the mechanism that closes the circulation loop in this region.United States. Dept. of Energy (Cooperative Agreement DE-FC02-99ER54512
    corecore