10,253 research outputs found
Scramjet nozzle design and analysis as applied to a highly integrated hypersonic research airplane
Engine-nozzle airframe integration at hypersonic speeds was conducted by using a high-speed research aircraft concept as a focus. Recently developed techniques for analysis of scramjet-nozzle exhaust flows provide a realistic analysis of complex forces resulting from the engine-nozzle airframe coupling. By properly integrating the engine-nozzle propulsive system with the airframe, efficient, controlled and stable flight results over a wide speed range
Orbiter/launch system
The system includes reusable turbojet propelled booster vehicles releasably connected to a reusable rocket powered orbit vehicle. The coupled orbiter-booster combination takes off horizontally and ascends to staging altitude and speed under booster power with both orbiter and booster wings providing lift. After staging, the booster vehicles fly back to Earth for horizontal landing and the orbiter vehicle continues ascending to orbit
Detecting periodicity in experimental data using linear modeling techniques
Fourier spectral estimates and, to a lesser extent, the autocorrelation
function are the primary tools to detect periodicities in experimental data in
the physical and biological sciences. We propose a new method which is more
reliable than traditional techniques, and is able to make clear identification
of periodic behavior when traditional techniques do not. This technique is
based on an information theoretic reduction of linear (autoregressive) models
so that only the essential features of an autoregressive model are retained.
These models we call reduced autoregressive models (RARM). The essential
features of reduced autoregressive models include any periodicity present in
the data. We provide theoretical and numerical evidence from both experimental
and artificial data, to demonstrate that this technique will reliably detect
periodicities if and only if they are present in the data. There are strong
information theoretic arguments to support the statement that RARM detects
periodicities if they are present. Surrogate data techniques are used to ensure
the converse. Furthermore, our calculations demonstrate that RARM is more
robust, more accurate, and more sensitive, than traditional spectral
techniques.Comment: 10 pages (revtex) and 6 figures. To appear in Phys Rev E. Modified
styl
Recommended from our members
Results of an aqueous source term model for a radiological risk assessment of the Drigg LLW Site, U.K.
A radionuclide source term model has been developed which simulates the biogeochemical evolution of the Drigg low level waste (LLW) disposal site. The DRINK (DRIgg Near field Kinetic) model provides data regarding radionuclide concentrations in groundwater over a period of 100,000 years, which are used as input to assessment calculations for a groundwater pathway. The DRINK model also provides input to human intrusion and gaseous assessment calculations through simulation of the solid radionuclide inventory. These calculations are being used to support the Drigg post closure safety case. The DRINK model considers the coupled interaction of the effects of fluid flow, microbiology, corrosion, chemical reaction, sorption and radioactive decay. It represents the first direct use of a mechanistic reaction-transport model in risk assessment calculations
Scramjet nozzle design and analysis as applied to a highly integrated hypersonic research airplane
The configuration and performance of the propulsion system for the hypersonic research vehicle are discussed. A study of the interactions between propulsion and aerodynamics of the highly integrated vehicle was conducted. The hypersonic research vehicle is configured to test the technology of structural and thermal protection systems concepts and the operation of the propulsion system under true flight conditions for most of the hypersonic flight regime. The subjects considered are: (1) research vehicle and scramjet engine configurations to determine fundamental engine sizing constraints, (2) analytical methods for computing airframe and propulsion system components, and (3) characteristics of a candidate nozzle to investigate vehicle stability and acceleration performance
Spatial accessibility and social inclusion: The impact of Portugal's last health reform
Health policies seek to promote access to health care and should provide appropriate geographical accessibility to each demographical functional group. The dispersal demand of health‐careservices and the provision for such services atfixed locations contribute to the growth of inequality intheir access. Therefore, the optimal distribution of health facilities over the space/area can lead toaccessibility improvements and to the mitigation of the social exclusion of the groups considered mostvulnerable. Requiring for such, the use of planning practices joined with accessibility measures. However,the capacities of Geographic Information Systems in determining and evaluating spatial accessibility inhealth system planning have not yet been fully exploited. This paper focuses on health‐care services planningbased on accessibility measures grounded on the network analysis. The case study hinges on mainlandPortugal. Different scenarios were developed to measure and compare impact on the population'saccessibility. It distinguishes itself from other studies of accessibility measures by integrating network data ina spatial accessibility measure: the enhanced two‐stepfloating catchment area. The convenient location forhealth‐care facilities can increase the accessibility standards of the population and consequently reducethe economic and social costs incurred. Recently, the Portuguese government implemented a reform thataimed to improve, namely, the access and equity in meeting with the most urgent patients. It envisaged,in terms of equity, the allocation of 89 emergency network points that ensured more than 90% of thepopulation be within 30 min from any one point in the network. Consequently, several emergency serviceswere closed, namely, in rural areas. This reform highlighted the need to improve the quality of the emergencycare, accessibility to each care facility, and equity in their access. Hence, accessibility measures becomean efficient decision‐making tool, despite its absence in effective practice planning. According to anapplication of this type of measure, it was possible to verify which levels of accessibility were decreased,including the most disadvantaged people, with a larger time of dislocation of 12 min between 2001 and 2011
Alpha Activity During Lucid Dreaming
We have been interested in the electrophysiological correlates of lucid dreaming (LD) since early work in this laboratory suggested a relationship between lucidity and alpha activity (Ogilvie, Hunt, Sawicki &McGowan, 1978; Ogilvie, Hunt, Tyson, Lucescu & Jeakins, 1982; Tyson, Ogilvie, & Hunt, 1984). Until now, this alpha-lucidity hypothesis had not been tested in our lab on high frequency lucid dreamers who signal while in REM sleep, and LaBerge (1980; 1981) has not observed any changes in alpha in signalled episodes of lucidity. The present report describes computer analyses of EEG activity obtained during eight laboratory nights from a frequent lucid dreamer. In addition to standard polysomnographic measures, CCTV monitoring with two cameras and a screen splitter permitted simultaneous display and videotaping of the subject's (RJS's) face and concurrent polygraphic activity. This was particularly useful during REM, since RJS had trained himself to sleep on his back and to try to signal from that position. In the month prior to the lab nights, RJS spend over an hour per day meditating. He also used LaBerge's lucidity induction or cognitive self-instruction techniques and reported LD rates in excess of one per night. He practiced signalling (using three blinks/ rapid vertical eye movements) and thought he had successfully signalled several LDs while at home
Dynamical modeling of collective behavior from pigeon flight data: flock cohesion and dispersion
Several models of flocking have been promoted based on simulations with
qualitatively naturalistic behavior. In this paper we provide the first direct
application of computational modeling methods to infer flocking behavior from
experimental field data. We show that this approach is able to infer general
rules for interaction, or lack of interaction, among members of a flock or,
more generally, any community. Using experimental field measurements of homing
pigeons in flight we demonstrate the existence of a basic distance dependent
attraction/repulsion relationship and show that this rule is sufficient to
explain collective behavior observed in nature. Positional data of individuals
over time are used as input data to a computational algorithm capable of
building complex nonlinear functions that can represent the system behavior.
Topological nearest neighbor interactions are considered to characterize the
components within this model. The efficacy of this method is demonstrated with
simulated noisy data generated from the classical (two dimensional) Vicsek
model. When applied to experimental data from homing pigeon flights we show
that the more complex three dimensional models are capable of predicting and
simulating trajectories, as well as exhibiting realistic collective dynamics.
The simulations of the reconstructed models are used to extract properties of
the collective behavior in pigeons, and how it is affected by changing the
initial conditions of the system. Our results demonstrate that this approach
may be applied to construct models capable of simulating trajectories and
collective dynamics using experimental field measurements of herd movement.
From these models, the behavior of the individual agents (animals) may be
inferred
The Patient Assessment of Chronic Illness Care produces measurements along a single dimension: results from a Mokken analysis.
BACKGROUND: As the worldwide prevalence of chronic illness increases so too does the demand for novel treatments to improve chronic illness care. Quantifying improvement in chronic illness care from the patient perspective relies on the use of validated patient-reported outcome measures. In this analysis we examine the psychometric and scaling properties of the Patient Assessment of Chronic Illness Care (PACIC) questionnaire for use in the United Kingdom by applying scale data to the non-parametric Mokken double monotonicity model. METHODS: Data from 1849 patients with long-term conditions in the UK who completed the 20-item PACIC were analysed using Mokken analysis. A three-stage analysis examined the questionnaire's scalability, monotonicity and item ordering. An automated item selection procedure was used to assess the factor structure of the scale. Analysis was conducted in an 'evaluation' dataset (n = 956) and results were confirmed using an independent 'validation' (n = 890) dataset. RESULTS: Automated item selection procedures suggested that the 20 items represented a single underlying trait representing "patient assessment of chronic illness care": this contrasts with the multiple domains originally proposed. Six items violated invariant item ordering and were removed. The final 13-item scale had no further issues in either the evaluation or validation samples, including excellent scalability (Ho = .50) and reliability (Rho = .88). CONCLUSIONS: Following some modification, the 13-items of the PACIC were successfully fitted to the non-parametric Mokken model. These items have psychometrically robust and produce a single ordinal summary score. This score will be useful for clinicians or researchers to assess the quality of chronic illness care from the patient's perspective
- …