108 research outputs found
Frequency Offset Correction in a Software Defined HiperLAN/2 Demodulator using Preamble Section A
In our Software Defined Radio project we perform a feasibility study of a software defined radio for two communication standards: HiperLAN/2 and Bluetooth. In this paper the Matlab/Simulink implementation of the HiperLAN/2 demodulator for the demonstrator of the project is discussed, with special attention for the frequency offset corrector. This type of correction is necessary to prevent large bit error rates that are caused by inter-subcarrier interference. The method that is proposed in this paper uses preamble section A to estimate the frequency offset. Simulation results for an AWGN channel show that the method is capable of correcting frequency offsets up to the boundary defined in the standard [1]. It was observed that frequency offset correction using only preamble section A is sensitive to ΒΏfor exampleΒΏ synchronization errors in case real-life analog front-end signals are used
A novel framework for the temporal analysis of bone mineral density in metastatic lesions using CT images of the femur
On the design of an image compression scheme based upon a priori knowledge about imaging system and image statistics
This contribution is about the design of an image compression scheme for near loss-less image compression of a restricted class of images and a specific application. The images are digital diagnostic X-ray images of the coronary vessels of the human heart. This paper proposes a novel compression scheme with a compression ratio of 8-10 with preservation of the diagnostic image quality. Central in our approach is the amount of information a trained and highly skilled observer i.e. the cardiologist is able discern at a given exposure and thus quantum noise level. The physics of the image detection process together with the a priori knowledge of the imaging system are the basis of the image statistics. Relevant elements of the human visual system complete the stochastic characterization of imaging process whereon the compression scheme is based. 1
Patient-tailored risk assessment of obstructive coronary artery disease using Rubidium-82 PET-based myocardial flow quantification with visual interpretation
Introduction: Our aim was to estimate the probability of obstructive CAD (oCAD) for an individual patient as a function of the myocardial flow reserve (MFR) measured with Rubidium-82 (Rb-82) PET in patients with a visually normal or abnormal scan. Materials and Methods: We included 1519 consecutive patients without a prior history of CAD referred for rest-stress Rb-82 PET/CT. All images were visually assessed by two experts and classified as normal or abnormal. We estimated the probability of oCAD for visually normal scans and scans with small (5%β10%) or larger defects (> 10%) as function of MFR. The primary endpoint was oCAD on invasive coronary angiography, when available. Results: 1259 scans were classified as normal, 136 with a small defect and 136 with a larger defect. For the normal scans, the probability of oCAD increased exponentially from 1% to 10% when segmental MFR decreased from 2.1 to 1.3. For scans with small defects, the probability increased from 13% to 40% and for larger defects from 45% to > 70% when segmental MFR decreased from 2.1 to 0.7. Conclusion: Patients with > 10% risk of oCAD can be distinguished from patients with < 10% risk based on visual PET interpretation only. However, there is a strong dependence of MFR on patientβs individual risk of oCAD. Hence, combining both visual interpretation and MFR results in a better individual risk assessment which may impact treatment strategy.</p
Development of a dynamic myocardial perfusion phantom model for tracer kinetic measurements
BACKGROUND: Absolute myocardial perfusion imaging (MPI) is beneficial in the diagnosis and prognosis of patients with suspected or known coronary artery disease. However, validation and standardization of perfusion estimates across centers is needed to ensure safe and adequate integration into the clinical workflow. Physical myocardial perfusion models can contribute to this clinical need as these can provide ground-truth validation of perfusion estimates in a simplified, though controlled setup. This work presents the design and realization of such a myocardial perfusion phantom and highlights initial performance testing of the overall phantom setup using dynamic single photon emission computed tomography. RESULTS: Due to anatomical and (patho-)physiological representation in the 3D printed myocardial perfusion phantom, we were able to acquire 22 dynamic MPI datasets in which 99mTc-labelled tracer kinetics was measured and analyzed using clinical MPI software. After phantom setup optimization, time activity curve analysis was executed for measurements with normal myocardial perfusion settings (1.5 mL/g/min) and with settings containing a regional or global perfusion deficit (0.8 mL/g/min). In these measurements, a specific amount of activated carbon was used to adsorb radiotracer in the simulated myocardial tissue. Such mimicking of myocardial tracer uptake and retention over time satisfactorily matched patient tracer kinetics. For normal perfusion levels, the absolute mean error between computed myocardial blood flow and ground-truth flow settings ranged between 0.1 and 0.4 mL/g/min. CONCLUSION: The presented myocardial perfusion phantom is a first step toward ground-truth validation of multimodal, absolute MPI applications in the clinical setting. Its dedicated and 3D printed design enables tracer kinetic measurement, including time activity curve and potentially compartmental myocardial blood flow analysis
n- ΠΈΡΡΠΈΡΠ»Π΅Π½ΠΈΠ΅ β ΡΠ΅Π°Π»ΠΈΡΡΠΈΡΠ½Π°Ρ ΡΠΎΡΠΌΠ°Π»ΠΈΠ·Π°ΡΠΈΡ ΠΊΠ»Π°ΡΡΠ° ΠΏΠ΅ΡΠ΅ΠΏΠΈΡΡΠ²Π°ΡΡΠΈΡ ΡΠΈΡΡΠ΅ΠΌ
ΠΡΠ΅Π΄Π»ΠΎΠΆΠ΅Π½ Π½ΠΎΠ²ΡΠΉ ΡΠΎΡΠΌΠ°Π»ΠΈΠ·ΠΌ ΡΠΈΠΏΠΈΠ·ΠΈΡΠΎΠ²Π°Π½Π½ΠΎΠ³ΠΎ Ξ·-ΠΈΡΡΠΈΡΠ»Π΅Π½ΠΈΡ Π² ΠΊΠ°ΡΠ΅ΡΡΠ²Π΅ ΡΠ΅ΠΎΡΠ΅ΡΠΈΡΠ΅ΡΠΊΠΎΠΉ ΠΎΡΠ½ΠΎΠ²Ρ Π΄Π»Ρ ΠΏΠΎ-ΡΡΡΠΎΠ΅Π½ΠΈΡ ΡΠΏΠ΅ΡΠΈΠ°Π»ΡΠ½ΡΡ
ΠΊΠ»Π°ΡΡΠΎΠ² ΡΠΈΡΡΠ΅ΠΌ ΠΏΡΠΎΠ³ΡΠ°ΠΌΠΌΠΈΡΠΎΠ²Π°Π½ΠΈΡ Π½Π° ΠΎΡΠ½ΠΎΠ²Π΅ ΠΏΠ΅ΡΠ΅ΠΏΠΈΡΡΠ²Π°ΡΡΠΈΡ
ΠΏΡΠ°Π²ΠΈΠ». Π€ΠΎΡΠΌΠ°-Π»ΠΈΠ·ΠΌ ΠΈΡΠΏΠΎΠ»ΡΠ·ΡΠ΅Ρ ΡΠΏΠΎΡΡΠ΄ΠΎΡΠ΅Π½Π½ΡΠ΅ Π½Π΅ΠΊΠΎΠ½ΡΠ»ΡΡΠ½ΡΠ½ΡΠ΅ ΠΌΠ½ΠΎΠΆΠ΅ΡΡΠ²Π° ΠΏΡΠ°Π²ΠΈΠ» ΠΏΠ΅ΡΠ΅ΠΏΠΈΡΡΠ²Π°Π½ΠΈΡ ΠΈ Π²Π·Π°ΠΈΠΌΠΎΠ΄Π΅ΠΉΡΡΠ²ΠΈΠ΅ Ρ ΠΏΡΠΎΠ³ΡΠ°ΠΌΠΌΠ½ΡΠΌ ΠΎΠΊΡΡΠΆΠ΅Π½ΠΈΠ΅ΠΌ, ΡΡΠΎ ΠΏΠΎΠ·Π²ΠΎΠ»ΡΠ΅Ρ ΡΠ°ΡΡΠΈΡΠΈΡΡ Π²ΠΎΠ·ΠΌΠΎΠΆΠ½ΠΎΡΡΠΈ ΠΏΡΠΎΠ³ΡΠ°ΠΌΠΌΠΈΡΠΎΠ²Π°Π½ΠΈΡ Π΄ΠΈΠ½Π°ΠΌΠΈΡΠ΅ΡΠΊΠΈΡ
ΠΏΡΠΈΠ»ΠΎΠΆΠ΅Π½ΠΈΠΉ
Improving lives in three dimensions:The feasibility of 3D printing for creating personalized medical AIDS in a rural area of Sierra Leone
The aim of this feasibility study was to investigate how a 3D printer could be put to its best use in a resource-limited healthcare setting. We have examined whether a 3D printer can contribute to making prostheses, braces, or splints for patients who underwent major limb amputation because of complex wounds, for example, due to burns and subsequent scarring, accidents, conflicts, or congenital abnormalities. During a 3-month period, we investigated the benefits of customized, 3D-printed arm prostheses, splints, and braces in Sierra Leone. Using a handheld 3D scanner and a 3D printer, patient-specific medical aids were designed, manufactured, and tested. Questionnaires regarding patient satisfaction and the functionality of the prostheses were used for a short-term follow-up. Four esthetic prostheses were designed: two prostheses of the hand, one of the forearm, and one of the entire arm. Follow-ups were conducted after 3 to 4 weeks to investigate the quality of the prostheses and to complete a patient questionnaire. Even though the prostheses primarily fulfill esthetic needs, they also exhibit some degree of functionality. In addition, four splints for hands and arms were made to prevent scar contractures after skin transplantation. Finally, a brace for a young boy with kyphoscoliosis was manufactured. The boy has accepted the brace and will be followed up in the months to come. Long-term follow-up is required to prove the sustainability of the 3D-printed brace and prosthetic arms. Further research into how to sustain and refine this project is underway.</p
A 3D-printed anatomical pancreas and kidney phantom for optimizing SPECT/CT reconstruction settings in beta cell imaging using 111In-exendin
Contains fulltext :
165641.pdf (publisher's version ) (Open Access)BACKGROUND: Quantitative single photon emission computed tomography (SPECT) is challenging, especially for pancreatic beta cell imaging with 111In-exendin due to high uptake in the kidneys versus much lower uptake in the nearby pancreas. Therefore, we designed a three-dimensionally (3D) printed phantom representing the pancreas and kidneys to mimic the human situation in beta cell imaging. The phantom was used to assess the effect of different reconstruction settings on the quantification of the pancreas uptake for two different, commercially available software packages. METHODS: 3D-printed, hollow pancreas and kidney compartments were inserted into the National Electrical Manufacturers Association (NEMA) NU2 image quality phantom casing. These organs and the background compartment were filled with activities simulating relatively high and low pancreatic 111In-exendin uptake for, respectively, healthy humans and type 1 diabetes patients. Images were reconstructed using Siemens Flash 3D and Hermes Hybrid Recon, with varying numbers of iterations and subsets and corrections. Images were visually assessed on homogeneity and artefacts, and quantitatively by the pancreas-to-kidney activity concentration ratio. RESULTS: Phantom images were similar to clinical images and showed comparable artefacts. All corrections were required to clearly visualize the pancreas. Increased numbers of subsets and iterations improved the quantitative performance but decreased homogeneity both in the pancreas and the background. Based on the phantom analyses, the Hybrid Recon reconstruction with 6 iterations and 16 subsets was found to be most suitable for clinical use. CONCLUSIONS: This work strongly contributed to quantification of pancreatic 111In-exendin uptake. It showed how clinical images of 111In-exendin can be interpreted and enabled selection of the most appropriate protocol for clinical use
- β¦