4,887 research outputs found
A study of course deviations during cross-country soaring
Several models are developed for studying the impact of deviations from course during cross country soaring flights. Analyses are performed at the microstrategy and macrostrategy levels. Two types of lift sources are considered: concentrated thermals and thermal streets. The sensitivity of the optimum speed solutions to various model, piloting and performance parameters is evaluated. Guides are presented to provide the pilot with criterions for making in-flight decisions. In general, course deviations are warranted during weak lift conditions, but are less justifiable with moderate to strong lift conditions
Use of constrained optimization in the conceptual design of a medium-range subsonic transport
Constrained parameter optimization was used to perform the optimal conceptual design of a medium range transport configuration. The impact of choosing a given performance index was studied, and the required income for a 15 percent return on investment was proposed as a figure of merit. A number of design constants and constraint functions were systematically varied to document the sensitivities of the optimal design to a variety of economic and technological assumptions. A comparison was made for each of the parameter variations between the baseline configuration and the optimally redesigned configuration
A computer program for obtaining airplane configuration plots from digital Datcom input data
A computer program is described which reads the input file for the Stability and Control Digital Datcom program and generates plots from the aircraft configuration data. These plots can be used to verify the geometric input data to the Digital Datcom program. The program described interfaces with utilities available for plotting aircraft configurations by creating a file from the Digital Datcom input data
OPDOT: A computer program for the optimum preliminary design of a transport airplane
A description of a computer program, OPDOT, for the optimal preliminary design of transport aircraft is given. OPDOT utilizes constrained parameter optimization to minimize a performance index (e.g., direct operating cost per block hour) while satisfying operating constraints. The approach in OPDOT uses geometric descriptors as independent design variables. The independent design variables are systematically iterated to find the optimum design. The technical development of the program is provided and a program listing with sample input and output are utilized to illustrate its use in preliminary design. It is not meant to be a user's guide, but rather a description of a useful design tool developed for studying the application of new technologies to transport airplanes
Experiences performing conceptual design optimization of transport aircraft
Optimum Preliminary Design of Transports (OPDOT) is a computer program developed at NASA Langley Research Center for evaluating the impact of new technologies upon transport aircraft. For example, it provides the capability to look at configurations which have been resized to take advantage of active controls and provide and indication of economic sensitivity to its use. Although this tool returns a conceptual design configuration as its output, it does not have the accuracy, in absolute terms, to yield satisfactory point designs for immediate use by aircraft manufacturers. However, the relative accuracy of comparing OPDOT-generated configurations while varying technological assumptions has been demonstrated to be highly reliable. Hence, OPDOT is a useful tool for ascertaining the synergistic benefits of active controls, composite structures, improved engine efficiencies and other advanced technological developments. The approach used by OPDOT is a direct numerical optimization of an economic performance index. A set of independent design variables is iterated, given a set of design constants and data. The design variables include wing geometry, tail geometry, fuselage size, and engine size. This iteration continues until the optimum performance index is found which satisfies all the constraint functions. The analyst interacts with OPDOT by varying the input parameters to either the constraint functions or the design constants. Note that the optimization of aircraft geometry parameters is equivalent to finding the ideal aircraft size, but with more degrees of freedom than classical design procedures will allow
An on-line equivalent system identification scheme for adaptive control
A prime obstacle to the widespread use of adaptive control is the degradation of performance and possible instability resulting from the presence of unmodeled dynamics. The approach taken is to explicitly include the unstructured model uncertainty in the output error identification algorithm. The order of the compensator is successively increased by including identified modes. During this model building stage, heuristic rules are used to test for convergence prior to designing compensators. Additionally, the recursive identification algorithm as extended to multi-input, multi-output systems. Enhancements were also made to reduce the computational burden of an algorithm for obtaining minimal state space realizations from the inexact, multivariate transfer functions which result from the identification process. A number of potential adaptive control applications for this approach are illustrated using computer simulations. Results indicated that when speed of adaptation and plant stability are not critical, the proposed schemes converge to enhance system performance
Economic evaluation of flying-qualities design criteria for a transport configured with relaxed static stability
Direct constrained parameter optimization was used to optimally size a medium range transport for minimum direct operating cost. Several stability and control constraints were varied to study the sensitivity of the configuration to specifying the unaugmented flying qualities of transports designed to take maximum advantage of relaxed static stability augmentation systems. Additionally, a number of handling qualities related design constants were studied with respect to their impact on the design
The reconfigurable Josephson circulator/directional amplifier
Circulators and directional amplifiers are crucial non-reciprocal signal
routing and processing components involved in microwave readout chains for a
variety of applications. They are particularly important in the field of
superconducting quantum information, where the devices also need to have
minimal photon losses to preserve the quantum coherence of signals.
Conventional commercial implementations of each device suffer from losses and
are built from very different physical principles, which has led to separate
strategies for the construction of their quantum-limited versions. However, as
recently proposed theoretically, by establishing simultaneous pairwise
conversion and/or gain processes between three modes of a Josephson-junction
based superconducting microwave circuit, it is possible to endow the circuit
with the functions of either a phase-preserving directional amplifier or a
circulator. Here, we experimentally demonstrate these two modes of operation of
the same circuit. Furthermore, in the directional amplifier mode, we show that
the noise performance is comparable to standard non-directional superconducting
amplifiers, while in the circulator mode, we show that the sense of circulation
is fully reversible. Our device is far simpler in both modes of operation than
previous proposals and implementations, requiring only three microwave pumps.
It offers the advantage of flexibility, as it can dynamically switch between
modes of operation as its pump conditions are changed. Moreover, by
demonstrating that a single three-wave process yields non-reciprocal devices
with reconfigurable functions, our work breaks the ground for the development
of future, more-complex directional circuits, and has excellent prospects for
on-chip integration
- …