External loading determines specific ECM genes regulation

Bio artificial matrices embedded with cells are simulated in bioreactors to facilitate ECM production. As cells attach, they develop forces, which are dependent on cell type and matrix stiffness. External forces (i.e strain), however, are critical for tissue homeostasis and elicit specific cellular responses, such as gene expression and protein production. Collagen Type I is a widely used scaffold in Tissue engineering. The aim of this study was to study the mechanical and molecular responses, of different cell types to increasing collagen substrate stiffness

Provenance and geochemistry of exotic clasts in conglomerates of the Oligocene Torehina Formation, Coromandel Peninsula, New Zealand

Non-marine pebble to cobble conglomerates of the lower Torehina Formation (Oligocene) crop out along western Coromandel Peninsula and overlie, with strong angular discordance, continental-margin metasedimentary rocks (Manaia Hill Group) of Mesozoic (Late Jurassic to ?Early Cretaceous) age. The conglomerates contain provenance information that identifies a pre-Oligocene depositional history obscured by the unconformable juxtaposition of these Tertiary and Mesozoic strata. Most clasts in the lower Torehina Formation are visually similar to local bedrock lithologies, including metamorphosed sandstones and argillites, but are kaolinitic and contain more detrital and authigenic chert, quartz, and potash feldspar. Local derivation of these clasts seems unlikely. By comparing geochemical ratios with those defined for continental margin sandstones, and well characterised New Zealand tectonic terranes, we interpret the majority of clasts in the lower Torehina Formation to have been derived from a dissected orogen, with mixtures of felsic and volcanogenic-derived sediment. The most likely sources are the Waipapa and Torlesse Terranes. The remaining 20–30% of the clasts in the lower Torehina Formation were originally friable, are coarse grained, and appear to be lithologically exotic relative to known metamorphosed sandstones in basement terrane sources on North Island. Some clasts contain coal laminae and particles, and all contain detrital kaolinite as lithic fragments and matrix. Such characteristics imply a non-marine to marginal-marine source containing sediment derived from strongly weathered granite or granodiorite. Mechanical fragility implies a likely proximal, easily erodible source. We propose that this group of clasts was derived from an Upper Cretaceous sedimentary cover, either part of a locally developed basin fill or part of a once regionally extensive cover on North Island. Either case defines a more widely distributed Cretaceous source than found today

A model of large volumetric capacitance in graphene supercapacitors based on ion clustering

Electric double layer supercapacitors are promising devices for high-power energy storage based on the reversible absorption of ions into porous, conducting electrodes. Graphene is a particularly good candidate for the electrode material in supercapacitors due to its high conductivity and large surface area. In this paper we consider supercapacitor electrodes made from a stack of graphene sheets with randomly-inserted "spacer" molecules. We show that the large volumetric capacitances C > 100 F/cm^3 observed experimentally can be understood as a result of collective intercalation of ions into the graphene stack and the accompanying nonlinear screening by graphene electrons that renormalizes the charge of the ion clusters.Comment: 13 pages, 5 figures; additional discussion and supporting calculations adde

Effect of thermal exposure, forming, and welding on high-temperature, dispersion-strengthened aluminum alloy: Al-8Fe-1V-2Si

The feasibility of applying conventional hot forming and welding methods to high temperature aluminum alloy, Al-8Fe-1V-2Si (FVS812), for structural applications and the effect of thermal exposure on mechanical properties were determined. FVS812 (AA8009) sheet exhibited good hot forming and resistance welding characteristics. It was brake formed to 90 deg bends (0.5T bend radius) at temperatures greater than or equal to 390 C (730 F), indicating the feasibility of fabricating basic shapes, such as angles and zees. Hot forming of simple contoured-flanged parts was demonstrated. Resistance spot welds with good static and fatigue strength at room and elevated temperatures were readily produced. Extended vacuum degassing during billet fabrication reduced porosity in fusion and resistance welds. However, electron beam welding was not possible because of extreme degassing during welding, and gas-tungsten-arc welds were not acceptable because of severely degraded mechanical properties. The FVS812 alloy exhibited excellent high temperature strength stability after thermal exposures up to 315 C (600 F) for 1000 h. Extended billet degassing appeared to generally improve tensile ductility, fatigue strength, and notch toughness. But the effects of billet degassing and thermal exposure on properties need to be further clarified. The manufacture of zee-stiffened, riveted, and resistance-spot-welded compression panels was demonstrated

A Single Circumbinary Disk in the HD 98800 Quadruple System

We present sub-arcsecond thermal infrared imaging of HD 98800, a young quadruple system composed of a pair of low-mass spectroscopic binaries separated by 0.8'' (38 AU), each with a K-dwarf primary. Images at wavelengths ranging from 5 to 24.5 microns show unequivocally that the optically fainter binary, HD 98800B, is the sole source of a comparatively large infrared excess upon which a silicate emission feature is superposed. The excess is detected only at wavelengths of 7.9 microns and longer, peaks at 25 microns, and has a best-fit black-body temperature of 150 K, indicating that most of the dust lies at distances greater than the orbital separation of the spectroscopic binary. We estimate the radial extent of the dust with a disk model that approximates radiation from the spectroscopic binary as a single source of equivalent luminosity. Given the data, the most-likely values of disk properties in the ranges considered are R_in = 5.0 +/- 2.5 AU, DeltaR = 13+/-8 AU, lambda_0 = 2(+4/-1.5) microns, gamma = 0+/-2.5, and sigma_total = 16+/-3 AU^2, where R_in is the inner radius, DeltaR is the radial extent of the disk, lambda_0 is the effective grain size, gamma is the radial power-law exponent of the optical depth, tau, and sigma_total is the total cross-section of the grains. The range of implied disk masses is 0.001--0.1 times that of the moon. These results show that, for a wide range of possible disk properties, a circumbinary disk is far more likely than a narrow ring.Comment: 11 page Latex manuscript with 3 postscript figures. Accepted for publication in Astrophysical Journal Letters. Postscript version of complete paper also available at http://www.hep.upenn.edu/PORG/web/papers/koerner00a.p

Mental States Are Like Diseases

While Quine’s linguistic behaviorism is well-known, his Kant Lectures contain one of his most detailed discussions of behaviorism in psychology and the philosophy of mind. Quine clarifies the nature of his psychological commitments by arguing for a modest view that is against ‘excessively restrictive’ variants of behaviorism while maintaining ‘a good measure of behaviorist discipline…to keep [our mental] terms under control’. In this paper, I use Quine’s Kant Lectures to reconstruct his position. I distinguish three types of behaviorism in psychology and the philosophy of mind: ontological behaviorism, logical behaviorism, and epistemological behaviorism. I then consider Quine’s perspective on each of these views and argue that he does not fully accept any of them. By combining these perspectives we arrive at Quine’s surprisingly subtle view about behaviorism in psychology

A sulfated glycoprotein synthesized by Sertoli cells and by epididymal cells is a component of the sperm membrane

We report here the purification, partial characterization and immunofluorescent localization of a dimeric acidic glycoprotein (DAG-protein) secreted by cultures of Sertoli cells of rat testes. Partially purified protein was obtained after chromatography over Sepharose 4B under conditions which favored a soluble, nonaggregated form of the protein. Rechromatography over the same column under reducing conditions yielded very pure monomers of 41,000 daltons and 29,000 daltons. Antibodies were prepared against the mixed monomers and used to immunoprecipitate proteins in spent medium from cultures incubated with [35S] methionine, 35SO4 = or tunicamycin. DAG-protein and another protein (Band 4, 70,000 daltons) were coprecipitated by the antiserum and all contained 35SO4 = in their structures. It was shown by Western blotting that the antiserum cross-reacted very weakly with Band 4 protein. The DAG-protein polypeptides secreted in the presence of tunicamycin were assumed to lack N-glycosylation and exhibited apparent molecular weights of 27,000 and 21,000 daltons. Immunoprecipitations of media from organ cultures of testis and epididymis yielded DAG-protein of slightly lower molecular weight than the protein secreted in Sertoli cell cultures. Indirect immunofluorescence of DAG-protein in paraffin sections of testis and epididymis revealed that the protein was concentrated in the cytoplasm of Sertoli cells, on the stereocilia of epididymal principal cells, in the cytoplasm of epididymal halo cells, and was associated with late spermatids and mature sperm. Sperm were specifically labeled on the acrosome, at the neck, and on the endpiece of the tail. No enzymatic or structural function has been ascribed to DAG-protein as yet, but the protein must play a pivotal role in spermatogenesis because it is secreted by both the testis and epididymis and becomes an integral component of sperm

Observations of the 5‐day wave in the mesosphere and lower thermosphere

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94851/1/grl7954.pd