Use of polyethylene glycol coatings for optical fibre humidity sensing

Humidity induced change in the refractive index and thickness of the polyethylene glycol (PEG) coatings are in situ investigated for a range from 10 to 95%, using an optical waveguide spectroscopic technique. It is experimentally demonstrated that, upon humidity change, the optical and swelling characteristics of the PEG coatings can be employed to build a plastic fibre optic humidity sensor. The sensing mechanism is based on the humidity induced change in the refractive index of the PEG film, which is directly coated onto a polished segment of a plastic optical fibre with dip-coating method. It is observed that PEG, which is a highly hydrophilic material, shows no monotonic linear response to humidity but gives different characteristics for various ranges of humidity levels both in index of refraction and in thickness. It undergoes a physical phase change from a semi-crystal line structure to a gel one at around 80% relative humidity. At this phase change point, a drastic decrease occurs in the index of refraction as well as a drastic increase in the swelling of the PEG film. In addition, PEG coatings are hydrogenated in a vacuum chamber. It is observed that the hydrogen has a preventing effect on the humidity induced phase change in PEG coatings. Finally, the possibility of using PEG coatings in construction of a real plastic fibre optic humidity sensor is discussed. (C) 2008 The Optical Society of Japan

UNDERSTANDING UNDERWATER PHOTOGRAMMETRY FOR MARITIME ARCHAEOLOGY THROUGH IMMERSIVE VIRTUAL REALITY

Underwater archaeological discoveries bring new challenges to the field, but such sites are more difficult to reach and, due to natural influences, they tend to deteriorate fast. Photogrammetry is one of the most powerful tools used for archaeological fieldwork. Photogrammetric techniques are used to document the state of the site in digital form for later analysis, without the risk of damaging any of the artefacts or the site itself. To achieve best possible results with the gathered data, divers should come prepared with the knowledge of measurements and photo capture methods. Archaeologists use this technology to record discovered arteacts or even the whole archaeological sites. Data gathering underwater brings several problems and limitations, so specific steps should be taken to get the best possible results, and divers should well be prepared before starting work at an underwater site. Using immersive virtual reality, we have developed an educational software to introduce maritime archaeology students to photogrammetry techniques. To test the feasibility of the software, a user study was performed and evaluated by experts. In the software, the user is tasked to put markers on the site, measure distances between them, and then take photos of the site, from which the 3D mesh is generated offline. Initial results show that the system is useful for understanding the basics of underwater photogrammetry

VIRTUAL TOUR IN THE SUNKEN “VILLA CON INGRESSO A PROTIRO” WITHIN THE UNDERWATER ARCHAEOLOGICAL PARK OF BAIAE

The paper presents the application of some Virtual Reality technologies developed in the Horizon 2020 i-MARECulture project to the case study of the sunken “Villa con ingresso a protiro”, dated around the II century AD, and located in the Marine Protected Area - Underwater Park of Baiae (Naples).The i-MARECulture project (www.imareculture.eu), in fact, aims to improve the public awareness about the underwater cultural heritage by developing new tool and techniques that take advantage of the virtual reality technologies to allow the general public to explore the archaeological remains outside of the submerged environment.To this end, the paper details the techniques and methods adopted for the development of an immersive virtual tour that allow users to explore, through a storytelling experience, a virtual replica and a 3D hypothetical reconstruction of the complex of the “Villa con ingresso a protiro”.</p

Application of Photogrammetry in Biomedical Science

Peer reviewedPostprin

Structure from motion photogrammetry in forestry : a review

AbstractPurpose of ReviewThe adoption of Structure from Motion photogrammetry (SfM) is transforming the acquisition of three-dimensional (3D) remote sensing (RS) data in forestry. SfM photogrammetry enables surveys with little cost and technical expertise. We present the theoretical principles and practical considerations of this technology and show opportunities that SfM photogrammetry offers for forest practitioners and researchers.Recent FindingsOur examples of key research indicate the successful application of SfM photogrammetry in forestry, in an operational context and in research, delivering results that are comparable to LiDAR surveys. Reviewed studies have identified possibilities for the extraction of biophysical forest parameters from airborne and terrestrial SfM point clouds and derived 2D data in area-based approaches (ABA) and individual tree approaches. Additionally, increases in the spatial and spectral resolution of sensors available for SfM photogrammetry enable forest health assessment and monitoring. The presented research reveals that coherent 3D data and spectral information, as provided by the SfM workflow, promote opportunities to derive both structural and physiological attributes at the individual tree crown (ITC) as well as stand levels.SummaryWe highlight the potential of using unmanned aerial vehicles (UAVs) and consumer-grade cameras for terrestrial SfM-based surveys in forestry. Offering several spatial products from a single sensor, the SfM workflow enables foresters to collect their own fit-for-purpose RS data. With the broad availability of non-expert SfM software, we provide important practical considerations for the collection of quality input image data to enable successful photogrammetric surveys