Quick detection of sabbles by using marquis treatment

Methamphetamine or N-methyl-alpha-methyl phenethyl amine is a powerful central nervous system stimulant drug that has an addictive effect when consumed. The number of cases of drug abuse in Indonesia in the last year is most dominated by methamphetamine so that an accurate analysis is needed to detect these compounds. Qualitative rapid detection can be done with marquis reagents which will produce a yellowish green if it is positive for consuming methamphetamine. Student urine samples were extracted with chloroform to separate to form two layers. The top layer filtrate was tested by Marquis reagents. From the test results found no positive Methamphentamine in the urine of class XI IPA students

Application of coconut battery waste to graphic as an alternative electrode on primary battery cells

Coconut shell is one of the potential biomass as carbon sources. Coconut shell is converted to charcoal through the carbonization process. The potential of charcoal from coconut shells can be synthesized into graphene. Graphene is a derivative of one of the carbon allotropes, namely graphite, where carbon is in the form of thin plates with sp2 orbitals arranged hexagonally. The process of making graphene which is coconut shell dried in the sun then pyrolysis into charcoal then mixed with activated carbon as a reducing agent at 600 ° C for 1 hour to produce graphene. The graphene produced is characterized by X-Ray Diffraction (XRD), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX). The results by XRD analysis showed the resulting peaks were not sharp and slightly widened at the diffraction peaks at 24 ° and 44 °. The results of SEM-EDX analysis at 4000x magnification show the surface size and shape of the structure that is smaller, thinner and reduced buildup on the graphene structure. graphene that has been successfully synthesized was tested on a coin battery. The coin battery cathode which was replaced with graphene succeeded in turning on the light. &nbsp

The effectiveness of activated carbon from nutmeg shell in reducing ammonia (NH3) levels in fish pond water

Ammonia (NH3) is one of the compounds found in water, and when it exceeds the threshold, it can become toxic, posing a problem for fish farmers. This research aims to reduce the ammonia (NH3) levels using activated carbon adsorbents based on nutmeg shell. The activated carbon was produced using a 1 M HCl solution as an activator with temperature variations of 600 °C, 650 °C, and 700 °C. The activated carbon obtained complies with the SNI No.06–3730–1995 standard, with characteristics of 9.23 % moisture content, 8.45 % volatile matter content, 9.71 % ash content, and 81.84 % bound carbon content. The best sample was obtained with an adsorbent mass of 6 g at 700 °C, reducing Ammonia (NH3) by 90 % with an adsorption capacity of 0.03 mg/g. Subsequently, the sample was subjected to Fourier Transform Infrared (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) analysis. Functional carbon groups were identified, especially at wavenumbers 3745.22 cm−1 and 3621.27 cm−1, facilitating adsorption. The sample had an amorphous structure but contained crystalline carbon structures. The highest peak observed was at 29.57° with a miller index (201). The surface of the sample exhibited pores, predominantly composed of carbon and oxygen. The adsorption mechanism of ammonia (NH3) on activated carbon occurs through intermolecular interactions. This research demonstrates the potential of a newly developed material for reducing NH3

The new material battery based on Mg/C-π

Herein, the effect of the size of Mg clusters on graphene nano sheets (GNS) and N-GNS (C-π) is investigated. The dependence of the electric conductivities of C-π on the electrolytes was also explored. This work aims to clarify the size effect of Mg clusters on Mg/C-π and to study the effect of addition of electrolytes to C-π materials on their electrical conductivities and chemical interaction between Mg on GNS and N-GNS, respectively. GNS and N-GNS are synthesized by modified Hummers and N-dopant method at room temperature, respectively. Characterization of each material is carried out using X-ray diffraction (XRD), scanning electron microscope–energy dispersive X-ray (SEM–EDX), and multimeter. The results show that the Mg cluster are well deposited on GNS and N-GNS and the addition of Mg metal and electrolyte materials can increase the electrical conductivities of Mg/GNS (69.9301 μS cm−1) and Mg/N-GNS (96.1538 μS cm−1), comparing to graphite (26.7 μS cm−1) and anode of commercial battery (26.0 μS cm−1). The addition of electrolyte can also increase the reduction power of Mg metal particles and the electron mobility of Mg/GNS and Mg/N-GNS materials. Interestingly, the electrolyte could reduce the size of Mg clusters and modulate the mobility of electrons. Data conclude that Mg/GNS and Mg/N-GNS can be produced into battery electrodes with better electrical conductivity

The New Materials for Battery Electrode Prototypes

In this article, we present the performance of Copper (Cu)/Graphene Nano Sheets (GNS) and C—π (Graphite, GNS, and Nitrogen-doped Graphene Nano Sheets (N—GNS)) as a new battery electrode prototype. The objectives of this research are to develop a number of prototypes of the battery electrode, namely Cu/GNS//Electrolyte//C—π, and to evaluate their respective performances. The GNS, N—GNS, and primary battery electrode prototypes (Cu/GNS/Electrolyte/C—π) were synthesized by using a modified Hummers method; the N-doped sheet was obtained by doping nitrogen at room temperature and the impregnation or the composite techniques, respectively. Commercial primary battery electrodes were also used as a reference in this research. The Graphite, GNS, N—GNS, commercial primary batteries electrode, and battery electrode prototypes were analyzed using an XRD, SEM-EDX, and electrical multimeter, respectively. The research data show that the Cu particles are well deposited on the GNS and N—GNS (XRD and SEM—EDX data). The presence of the Cu metal and electrolytes (NH4Cl and MnO2) materials can increase the electrical conductivities (335.6 S cm−1) and power density versus the energy density (4640.47 W kg−1 and 2557.55 Wh kg−1) of the Cu/GNS//Electrolyte//N—GNS compared to the commercial battery (electrical conductivity (902.2 S cm−1) and power density versus the energy density (76 W kg−1 and 43.95 W kg−1). Based on all of the research data, it may be concluded that Cu/GNS//Electrolyte//N—GNS can be used as a new battery electrode prototype with better performances and electrical activities

Distribution model of iron (Fe) on Fe/Graphene nano sheets

In this paper, we report about the distribution model of Iron (Fe) atoms on Graphene Nano Sheets (GNS). The purpose of this research is to evaluate the performance of Fe/GNS in terms of the distribution of Fe atoms on the graphene surface. GNS and Fe/GNS were prepared with modified Hummer's and impregnation methods, respectively. We found that the morphology of graphite is different compare to GNS where GNS has thin layers and no stacking sheets (Scanning Electron Microscope (SEM) data) and it contains majority Carbon (C) element (more than 90 wt%) (EDX data). The X-Ray Diffraction (XRD) data of GNS shows the appearance weak and broad peak on 2θ = 26.6o indicating GNS was formed, and the sharp peaks on 2θ = 43.84o prove that Fe atoms are well deposited on GNS (XRD data). Both SEM and XRD data prove GNS produced and Fe deposited on GNS. Further, we propose the distribution model of Fe atoms on GNS surfaces based on three steps. The first step is the Fe precursor react with GNS to produce Fe ions. The second step is Fe ions reduce while being deposited on GNS surfaces, generating Fe clusters. Finally, Fe clusters migrate on the surfaces of GNS to form Fe particles. The smallest Fe crystal size in Fe/GNS is at 3.81% Fe (1.5009 nm) and distributed into GNS. Based on those data, GNS was found to affect the properties of Fe metal.All of the authors would like thank to Rector of Universitas Sumatera Utara - Indonesia who supporting this research under Scheme C, Program Penelitian Riset Kolaborasi Indonesia (RKI) 2022, Nomor 9420/ UN5.1.R/SK/PAP/2022