7 research outputs found
Fractional Distillation of Bio-Oil Produced by Pyrolysis of Açaí (Euterpe oleracea) Seeds
In this work, the seeds of açaí (Euterpe oleracea, Mart), a rich lignin-cellulose residue, has been submitted to pyrolysis to produce a bio-oil-like fossil fuels. The pyrolysis carried out in a reactor of 143 L, 450°C, and 1.0 atm. The morphology of Açaí seeds in nature and after pyrolysis is characterized by SEM, EDX, and XRD. The experiments show that bio-oil, gas, and coke yields were 4.38, 30.56, and 35.67% (wt.), respectively. The bio-oil characterized by AOCS, ASTM, and ABNT/NBR methods for density, kinematic viscosity, and acid value. The bio-oil density, viscosity, and acid value were 1.0468 g/cm3, 68.34 mm2/s, and 70.26 KOH/g, respectively. The chemical composition and chemical functions of bio-oil are determined by GC-MS and FT-IR. The GC-MS identified in bio-oil 21.52% (wt.) hydrocarbons and 78.48% (wt.) oxygenates (4.06% esters, 8.52% carboxylic acids, 3.53% ketones, 35.16% phenols, 20.52% cresols, 5.75% furans, and 0.91% (wt.) aldehydes), making it possible to apply fractional distillation to obtain fossil fuel-like fractions rich in hydrocarbons. The distillation of bio-oil is carried out in a laboratory-scale column, according to the boiling temperature of fossil fuels. The distillation of bio-oil yielded fossil fuel-like fractions (gasoline, kerosene, and light diesel) of 4.70, 28.21, and 22.35% (wt.), respectively
Etidronate from Medicine to Endodontics: effects of different irrigation regimes on root dentin roughness
An increase in dentin roughness, associated with surface composition, contributes to bacterial adherence in recontaminations. Surface roughness is also important for micromechanical interlocking of dental materials to dentin, and understanding the characteristics of the surface is essential to obtain the adhesion of root canal sealers that have different physico-chemical characteristics. OBJECTIVES: To evaluate the effects of sodium hypochlorite (NaOCl), ethylenediaminetetraacetic (EDTA), etidronic (HEBP), and citric acid (CA) associated with different irrigation regimens on root dentin roughness. MATERIAL AND METHODS: Forty-five root halves of anterior teeth were used. The root parts were sectioned in thirds, embedded in acrylic resin and polished to a standard surface roughness. Initially, the samples of each third were randomly assigned into 3 groups and treated as follows: G1 - saline solution (control); G2 - 5% NaOCl+18% HEBP mixed in equal parts; and G3 - 2.5% NaOCl. After initial measuments, the G3 samples were distributed into subgroups G4, G5 and G6, which were subjected to 17% EDTA, 10% CA and 9% HEBP, respectively. Following the new measuments, these groups received a final flush with 2.5% NaOCl, producing G7, G8 and G9. The dentin surface roughness (Ra) was determined before and after treatments using a profilometer. The Wilcoxon test (α<0.05) was used to compare the values before and after treatments, and the Friedman test (α<0.05) to detect any differences among root thirds. RESULTS: (i) NaOCl did not affect the surface roughness; (ii) there was a significant increase in roughness after the use of chelating agents (P<0.01); and (iii) only the G3 group showed a difference in surface roughness between apical third and other thirds of the teeth (P<0.0043). CONCLUSION: Only the irrigation regimens that used chelating agents altered the roughness of root dentin
Thermal analysis characterization of PAAm-co-MC hydrogels
This paper reports the thermal characterization of polyacrylamide-co-methylcellulose hydrogels and the constituent monomers (acrylamide and methylcellulose). Polymeric materials can be used to produce hydrogels, which can be natural, synthetic, or a mixture. The hydrogels described here were obtained by free radical polymerization, in the presence of N,N'-methylene-bis-acrylamide as a cross-linker agent. Four acrylamide concentrations were used for the synthesis of hydrogels: 3.6, 7.2, 14.7, and 21.7% (w/v). The materials so obtained were analyzed by TG, DTG, DSC, and FT-IR. The TG curves of acrylamide and methylcellulose showed three mass loss events. In DSC curves, the acrylamide exhibited one melting peak at 84.5 A degrees C, and methylcellulose indicated one exothermic event. Nevertheless, acrylamide was considered more stable than methylcellulose. The TG curves of the hydrogels exhibited three mass loss events, and on the DSC curves, three endothermic events were observed. It was verified that the different acrylamide proportions influenced the thermic behavior of hydrogels, and that the authors considered the 7.2% hydrogel a promising drug carrier system. The absorption bands were well defined, confirming the presence of the functional groups in the samples.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES