Eficácia de um evidenciador de biofilme e de três escovas no controle da higiene de próteses totais

OBJECTIVE: This report evaluated the efficacy of three brushes and one biofilm disclosing agent in complete denture cleansing. METHODS: Twenty-seven wearers of maxillary dentures were distributed into three groups and received different brushes: Oral B40, conventional toothbrush (Oral B); Denture, denture-specific brush (Condor); Johnson & Johnson, denture-specific brush (Johnson & Johnson). The 60-day experimental period was divided into two techniques: I - brushing (brush associated with a paste - Dentu Creme, Dentco) three times a day; II - brushing and daily application of 1% neutral red on the denture internal surface. Biofilm quantification was carried out weekly and the areas with dye biofilm were obtained by means of Image Tool 2.02 software. RESULTS: Biofilm removal was more effective during Technique II (Wilcoxon test: p=0.01) for the three groups of brushes. When the brushes were compared in Technique I, the Kruskal Wallis test indicated statistical difference between Denture X Johnson & Johnson and Denture X Oral B40, in which the Denture was more efficient. For Technique II, there was no statistical difference between brushes (p>;0.05). CONCLUSION: The disclosed application promoted more efficacy on biofilm removal, regardless of the brush used. Denture (Condor) was more efficient than the other brushes during Technique I.Este trabalho avaliou três escovas e um evidenciador de biofilme na higiene de próteses totais. Vinte e sete usuários de próteses totais superiores foram distribuídos em três grupos que receberam diferentes escovas: Oral B40 para dentes naturais (Oral B); Denture para dentadura (Condor) e Johnson & Johnson para dentadura (Johnson & Johnson). O período experimental de 60 dias foi dividido em 2 Técnicas: I - utilização das escovas associadas a um dentifrício (Dentu-Creme, Dentco) três vezes ao dia; II - escovação e aplicação diária do evidenciador Vermelho neutro a 1% na superfície interna da prótese total. A quantificação do biofilme foi realizada semanalmente e as áreas com biofilme corado foram medidas com o auxílio do software Image Tool 2.02. A remoção do biofilme foi mais efetiva durante a Técnica II (teste de Wilcoxon: p=0.01) nos três grupos. Comparando as escovas, na Técnica I o teste de Kruskal Wallis indicou diferença significante (p=0.05) entre Denture X Johnson & Johnson e Denture X OralB 40, sendo a Denture a mais eficaz. Na Técnica II, as escovas não apresentaram diferença estatisticamente significante (p>;0,05). A aplicação do evidenciador promoveu maior eficácia na remoção do biofilme, independentemente da escova utilizada. Na comparação das escovas na Técnica I, a escova Denture foi a mais eficiente

Root-retained overdentures as the first choice in the rehabilitation of partially edentulous patients: case report / Sobredentadura sobre raízes como primeira escolha na reabilitação de pacientes parcialmente edêntulos: relato de caso

This case report aimed to describe the oral rehabilitation after the loss of multiple dental elements due to chronic periodontal involvement, with complaints of aesthetics, and loss of masticatory function. The patient, CRT, to 55 years old, presented, in maxillary, dental elements 13 and 23, horizontal bone loss and 1/3 of the roots' bone insertion. In the lower arch, the dental elements presents were 45, 44, 31, 32, 33, 34, and 35. Among these, the teeth 44, 33, 34, and 35 showing no loss of protective and support tissue, while teeth 45, 31, and 32 had more than half of the lost support bone and dental extrusion. Therefore, a complete upper denture and an overdenture were made with additional retention utilizing spherical retainers (o'rings) installed in the dental roots. The treatment involved a multidisciplinary approach with indication the support periodontal, endodontic, oral and maxillofacial surgery, and prosthesis. Despite the lack of support tissue, the patient reported excellent retention and stability of new dentures. Mandibular overdenture with additional retention on roots provide greater retention to the complete dentures, returning aesthetics, function, and comfort to the patient, and should be considered as the first rehabilitation option in several clinical cases, especially when there are clinical, individual, and socioeconomic conditions related to patients who cannot install osseointegrated implants

Biofilm disclosing agents in complete denture: clinical and antimicrobial evaluation

Este trabalho avaliou a capacidade em corar, a facilidade de remoção e a ação antimicrobiana de evidenciadores de biofilme dental em prótese total. A capacidade em corar foi avaliada por método visual aplicando-se evidenciadores sobre a superfície interna da prótese total superior. Após fotografia, as próteses coradas foram escovadas (escova e dentifrício específicos para prótese total) e novamente fotografadas. Os diapositivos foram projetados em folhas de papel (aumento de 10 X); as áreas total e corada das próteses contornadas com grafite, recortadas e pesadas, para obtenção, em porcentagem, dos resultados da facilidade de remoção. A ação antimicrobiana foi avaliada pelo método de difusão em ágar e os resultados obtidos pela medida dos aros e halos de inibição formados. A melhor capacidade em corar foi apresentada pelo azul de metileno (0,05%), eritrosina (5%), fluoresceína sódica (1%), Replak e vermelho neutro (1%). Eosina (1%), fluoresceína sódica (1%) e eritrosina (5%) apresentaram a maior facilidade de remoção. Não apresentaram ação antimicrobiana eosina (1%), eritrosina (5%), fluoresceína sódica (1%), proflavina (0,3%), Replak e vermelho neutro (1%). As soluções que apresentaram maior capacidade de corar, facilidade de remoção e ausência de ação antimicrobiana, requisitos necessários para auxiliar estudos que avaliam métodos de higiene e de orientação aos pacientes, foram eosina (1%), vermelho neutro (1%) e eritrosina (5%).This study evaluated the disclosing ability, removal facility and antimicrobial effect of biofilm disclosing agents applied on complete dentures. Disclosing ability was evaluated by means of the visual method. The solutions were applied on the internal surface of dentures. After being photographed, the dentures were brushed with denture-specific brush and dentifrice and photographed again. The obtained slides were projected on paper (10 X amplification) and the total and stained surfaces were outlined with graphite, cut off and weighed, in order to assess removal facility. The evaluation of antimicrobial effects was carried out by means of the method of diffusion in agar, and the results were obtained by measuring the length of the halos and rings. In terms of disclosing ability, the best solutions were 0.05% methylene blue, 5% erythrosin, 1% sodic fluorescein, Replak and 1% neutral red. One percent eosin, 1% sodic fluorescein and 5% erythrosin were the most easily removed solutions. One percent eosin, 5% erythrosin, 1% sodic fluorescein, 0.3% proflavine, Replak and 1% neutral red presented no antimicrobial effect. The solutions which presented the greatest disclosing ability and removal facility as well as absence of antimicrobial effect - which are essential requirements in the assessment of hygiene methods and guidance on oral health - were 1% eosin, 1% neutral red and 5% erythrosin

Behaviors and hygiene habits of complete denture wearers

In this study, a questionnaire was applied to patients from Ribeirão Preto Dental School, University of São Paulo, Brazil, to evaluate the hygiene methods and habits concerning the use of complete dentures, the age of dentures, and whether patients have been instructed on how to clean their dentures. The mean age of patients was 63.35 years, and most of them were females (82.08%). The results showed that 62.26% of the respondents had been using the same maxillary complete denture for more than 5 years, and 49.06% used the same mandible complete denture for more than 5 years. Of the patients interviewed, 58.49% slept with the dentures. Mechanical brushing was the most used cleaning method by the patients (100%), using water, dentifrice and toothbrush (84.91%). Most patients (51.89%) reported never having been instructed by their dentists as to how to clean their dentures. Based on the limitations of this study, it was concluded that the patients interviewed had limited knowledge about prosthetic hygiene and oral care. The method more used by patients was the mechanical method of brushing, most patients used the same complete dentures for more than 5 years and slept with the dentures.Foi realizada uma pesquisa na Faculdade de Odontologia de Ribeirão Preto - Universidade de São Paulo, por meio da aplicação de questionário, para avaliar os métodos de higiene e hábitos referentes ao uso de prótese total, idade das próteses, e se os pacientes têm sido instruídos em como limpar suas próteses. A idade média dos pacientes estudados foi 63,35 anos, a maioria (82,08%) do sexo feminino. Os resultados mostraram que 62,26% dos entrevistados usavam a mesma prótese total superior há mais de 5 anos, e 49,06% a mesma prótese total inferior. Dos pacientes entrevistados, 58,49% dormiam com as próteses. O método mais utilizado pelos pacientes foi o método mecânico de escovação (100% dos pacientes), utilizando água, pasta e escova de dente (84,91%). A maioria dos pacientes (51,89%) relatou nunca ter sido orientado pelos dentistas de como higienizar as próteses. Baseado nas limitações deste estudo, concluiu-se que os pacientes entrevistados tinham conhecimento limitado sobre higiene protética e cuidados bucais. O método de higiene mais utilizado foi a escovação da prótese, a maioria dos pacientes usavam a mesma prótese total há mais de cinco anos e dormiam com as próteses

Effect of experimental Ricinus communis solution for denture cleaning on the properties of acrylic resin teeth

This study evaluated Knoop hardness, surface roughness and color alteration of artificial teeth for dentures after immersion in water, 1% sodium hypochlorite and an experimental solution of 2% Ricinus communis (RC). Thirty specimens of Vipi, Biolux and Trilux were analyzed. Tests of Knoop hardness, surface roughness and color alteration were conducted immediately after specimen preparation (T0) and after two immersion protocols for 15 days (&#916;T15) and 183 days (&#916;T183). Data variation (&#916;T) were subjected to ANOVA and Tukey's test (p<0.05). At &#916;T15, Vipi presented hardness increase and Biolux presented the highest variation (p=0.01). RC caused the highest increase in hardness (p=0) and the lowest increase (p=0.005) in roughness. Biolux presented the lowest color alteration (p =0). At &#916;T183, Trilux underwent the highest hardness variation (p=0). Biolux presented an increase in roughness (p=0). There was no significant differences in color alteration among the artificial teeth (p=0.06) and among solutions (p=0.08) after 183 days of immersion. All solutions (distilled water, 1% sodium hypochlorite and 2% RC) caused alterations on the analyzed properties. Both immersion protocols caused alterations on the analyzed properties

Comparison of physical and mechanical properties of microwave-polymerized acrylic resin after disinfection in sodium hypochlorite solutions

This study evaluated the color stability, surface roughness and flexural strength of a microwave-polymerized acrylic resin after immersion in sodium hypochlorite (NaOCl), simulating 20 min of disinfection daily during 180 days. Forty disk-shaped (15 x 4 mm) and 40 rectangular (65 x 10 x 3 mm) specimens were prepared with a microwave-polymerized acrylic resin (Onda-Cryl). Specimens were immersed in either 0.5% NaOCl, 1% NaOCl, Clorox/Calgon and distilled water (control). Color measurements were determined by a portable colorimeter. Three parallel lines, separated by 1.0 mm, were registered on each specimen before and after immersion procedures to analyze the surface roughness. The flexural strength was measured using a 3-point bending test in a universal testing machine with a 50 kgf load cell and a crosshead speed of 1 mm/min. Data were analyzed statistically by ANOVA and Tukey's test (?=0.05). There was no statistically significant differences (p>0.05) among the solutions for color, surface roughness and flexural strength. It may be concluded that immersion in NaOCl solutions simulating short-term daily use during 180 days did not influence the color stability, surface roughness and flexural strength of a microwave-polymerized acrylic resin.Este estudo avaliou a estabilidade de cor, rugosidade superficial e resistência à flexão de resina acrílica polimerizada por microondas após desinfecção em hipoclorito de sódio, simulando 20 min de desinfecção diária durante 180 dias. Quarenta espécimes circulares (15 x 4 mm) e 40 retangulares (65 x 10 x 3 mm) foram preparados em resina acrílica polimerizada por microondas (Onda-Cryl). As amostras foram imersas em hipoclorito de sódio a 0,5%, hipoclorito de sódio a 1%, Clorox/Calgon e água destilada (controle). Medidas de cor foram determinadas por um espectrocolorímetro portátil. Três linhas paralelas, separadas por 1,0 mm, foram registradas em cada amostra antes e depois dos procedimentos de imersão para analisar a rugosidade superficial. A resistência à flexão foi medida utilizando um teste de flexão por 3 pontos em uma máquina universal de ensaios com uma célula de carga de 50 Kgf e uma velocidade de 1 mm/min. Os dados foram analisados estatisticamente por ANOVA e teste de Tukey (?=0,05). Não houve diferença estatisticamente significante (p>0,05) entre as soluções para cor, rugosidade superficial e resistência à flexão. Pode-se concluir que a imersão em soluções de hipoclorito de sódio, simulando um uso diário de curta duração durante 180 dias, não influenciou a estabilidade de cor, rugosidade superficial e resistência à flexão de resina acrílica polimerizada por microondas.FAPESPCNP

Development of a novel resin with antimicrobial properties for dental application

The adhesion of biofilm on dental prostheses is a prerequisite for the occurrence of oral diseases. Objective: To assess the antimicrobial activity and the mechanical properties of an acrylic resin embedded with nanostructured silver vanadate (β-AgVO3). Material and Methods: The minimum inhibitory concentration (MIC) of β-AgVO3 was studied in relation to the species Staphylococcus aureus ATCC 25923, Streptococcus mutans ATCC 25175, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231. The halo zone of inhibition method was performed in triplicate to determine the inhibitory effect of the modified self-curing acrylic resin Dencor Lay - Clássico®. The surface hardness and compressive strength were examined. The specimens were prepared according to the percentage of β-AgVO3 (0%-control, 0.5%, 1%, 2.5%, 5%, and 10%), with a sample size of 9x2 mm for surface hardness and antimicrobial activity tests, and 8x4 mm for the compression test. The values of the microbiologic analysis were compared and evaluated using the Kruskal-Wallis test (α=0.05); the mechanical analysis used the Shapiro-Wilk's tests, Levene's test, ANOVA (one-way), and Tukey's test (α=0.05). Results: The addition of 10% β-AgVO3 promoted antimicrobial activity against all strains. The antimicrobial effect was observed at a minimum concentration of 1% for P. aeruginosa, 2.5% for S. aureus, 5% for C. albicans, and 10% for S. mutans. Surface hardness and compressive strength increased significantly with the addition of 0.5% β-AgVO3 (p;0.05). Conclusions: The incorporation of β-AgVO3 has the potential to promote antimicrobial activity in the acrylic resin. At reduced rates, it improves the mechanical properties, and, at higher rates, it does not promote changes in the control

Antimicrobial activity of complete denture cleanser solutions based on sodium hypochlorite and Ricinus communis – a randomized clinical study

To preserve oral health and to maintain the prosthetic devices, it is important not only to improve the properties of commonly known hygiene products, but also to investigate new materials with antimicrobial action. Objectives This study evaluated the antimicrobial activity of sodium hypochlorite (0.25% and 0.50%) and 10% Ricinus communis’ solutions against specific microorganisms. Material and Methods Sixty four maxillary complete denture wearers were instructed to brush their dentures three times a day and to soak them (20 min/day) in the solutions: SH1: 0.25% sodium hypochlorite; SH2: 0.5% sodium hypochlorite; RC: 10% R. communis oil; and C: 0.85% saline (control). The solutions were used for 7 days in a randomized sequence. Following each period of use, there was a 1-week washout period. Antimicrobial activity was determined by Colony Forming Units (CFU) counts of Streptococcus mutans, Candida spp., and gram-negative microorganisms. For collecting biofilm, the internal surface of maxillary dentures was brushed with saline solution, and biofilm suspension obtained. After dilutions (100 - 10-3), aliquots were seeded in Mitis salivarius, CHROMagar Candida®, and MacConkey agar for detecting S. mutans, Candida spp., or gram-negative microorganisms, respectively. After incubation, colonies were counted, and CFU/mL values were calculated. Then, transformation - log10 (CFU+1) - data were analyzed using the Friedman test (α=0.05). Results showed significant differences between the solutions (

Comparative study of methods for the quantification of biofilm on complete dentures

This study compared the application and reliability of 4 methods for biofilm quantification (computerized, paper-weighing, point-counting, and planimetric) in complete dentures, verifying the correlation between them. The internal surfaces of 62 complete dentures were stained (5% erythrosine) and photographed. The slides were projected on paper, and the areas (total and biofilm-covered) were outlined with a pencil. These areas were measured with an equidistant point grid (point-counting method), a digital planimeter (planimetric method), and for the paper weighing method they were cut and weighed with a precision scale. For the computerized method, ImageTool software was used. In order to perform a validation test of the methods, all of them were applied to slide projections of geometric figures with known dimensions. The correlation tests showed high correlation values (r = 0.82 to 0.99) among the methods. The validation test (ANOVA) showed no statistically significant differences among the values obtained from the measurement of figures using all four quantitative methods and the real dimensions of these geometric figures. Quantitative methods were efficient and reliable for measuring quantity of biofilm in complete dentures, and may be useful in experimental studies on the efficacy of hygiene products. The computerized method was fast and easy to perform