190 research outputs found
Photodiode read-out of the ALICE photon spectrometer crystals
Proposal of abstract for LEB99, Snowmass, Colorado, 20-24 September 1999The PHOton Spectrometer of the ALICE experiment is an electromagnetic calorimeter of high granularity consisting of 17280 lead-tungstate (PWO) crystals of dimensions 22x22x180 mm3, read out by large-area PIN-diodes with very low-noise front-end electronics. The crystal assembly is operated at -25C to increase the PWO light yield. A 16.1x17.1 mm2 photodiode, optimized for the PWO emissio spectrum at 400-500 nm, has been developed. The 20x20 mm2 preamplifier PCB is attached to the back side of the diode ceramic frame. The charge sensitive preamplifier is built in discrete logic with two input JFETs for optimum matching with the ~150pF PIN-diode. A prototype shaper has been designed and built in discrete logic. For a detector matrix of 64 units the measured ENCs are between 450-550e at -25C. Beam tests demonstrate that the required energy resolution is reached.Summary:The PHOton Spectrometer of the ALICE experiment is an electromagnetic calorimeter of high granularity consisting of 17280 lead-tungstate (PWO) crystals of dimensions 22x22x180 mm3, coupled to large-area PIN-diodes with matching low-noise preamplifiers. PHOS is optimized for measuring photons, pi0s and eta mesons in the momentum ranges 0.5-10, 1-10 and 2-10 GeV/c, respectively, and is designed for the expected large number of particles that will be produced in central Pb-Pb collisions. Lead tungstate (PWO) is a fast scintillating crystal with a rather complex emission spectrum, consisting of two components: a blue component peaking at 420 nm and a green component peaking at 480-520 nm. The light yield of PWO at room temperature is low compared with other heavy scintillating crystals, for instance BGO. However, the yield depends strongly on the temperature with a coefficient of ~-2 degree. At the selected operating temperature of -25C the yield is about a factor of 3 higher compared to room temperature. Still, in order to reach the required energy resolution for a PHOS channel, an ENC noise of less than 600e for the PIN-diode-preamplifier-shaper stage is required. This is a very low value taking into account the high capacitance of 150-200 pF of the large area PIN-diodes. In collaboration with the PHOS project, the company AME (Horten, Norway) has designed and produced a PIN-photodiode optimized for the cross-section and spectral responsivity of the PHOS PWO crystal. The photodiode has an active area of 17.1x16.1 mm2 and is fabricated on n-type silicon material of thickness 280 um. The wafer specific resistivity is between 3000 and 6000 ohm-cm, which corresponds to a depletion voltage of 70V. The photodiode response is optimized for the spectral region 400-500 nm in order to match the PWO emission spectrum. The PIN-diode is mounted on a ceramic substrate 0.65 mm thick. On this substrate the diode is surrounded by a ceramic frame. The preamplifier PCB of dimension 20x20 mm2 is attached to the back side of the frame. The PIN-diode and bondings to ground and preamplifier input are protected by an optically transparent epoxy layer. The front side of the PIN-diode is glued onto the endface of the PWO crystal with optically transparent glue (Melt-Mount Quick-Stick, Cargille Laboratories, USA). Each crystal is wrapped in White Tyvek to ensure maximum light collection efficiency and optical insulation between the crystals. The PHOS detector consists of four independent modules, each with 4320 channels. The crystal assembly with the photo detectors are operated at -25 +/- 0.3C. The power dissipation per module is ~1 kW. The charge sensitive preamplifier is an operational amplifier built in discrete logic and with two input JFETs (BF861A). Using two JFETs in parallel gives the lowest noise for detector capacitance >100 pF. A prototype shaper, comprising three amplification stages, has been designed and built in discrete logic. For a PIN-diode with capacitance ~150 pF and a leakage current <1 nA under cooling, calculations give optimum time differentiation and integration constants around 3 microsec. For a detector matrix of 64 units the measured ENCs are between 450-550 e at -25C. Beam tests of this matrix show that the required energy resolution for the PHOS is reached
Systematics of Inclusive Photon Production in 158 AGeV Pb Induced Reactions on Ni, Nb, and Pb Targets
The multiplicity of inclusive photons has been measured on an event-by-event
basis for 158 AGeV Pb induced reactions on Ni, Nb, and Pb targets. The
systematics of the pseudorapidity densities at midrapidity (rho_max) and the
width of the pseudorapidity distributions have been studied for varying
centralities for these collisions. A power law fit to the photon yield as a
function of the number of participating nucleons gives a value of 1.13+-0.03
for the exponent. The mean transverse momentum, , of photons determined
from the ratio of the measured electromagnetic transverse energy and photon
multiplicity, remains almost constant with increasing rho_max. Results are
compared with model predictions.Comment: 16 pages including 4 figure
Scaling of Particle and Transverse Energy Production in 208Pb+208Pb collisions at 158 A GeV
Transverse energy, charged particle pseudorapidity distributions and photon
transverse momentum spectra have been studied as a function of the number of
participants (N_{part}) and the number of binary nucleon-nucleon collisions
(N_{coll}) in 158 A GeV Pb+Pb collisions over a wide impact parameter range. A
scaling of the transverse energy pseudorapidity density at midrapidity as
N_{part}^{1.08 \pm 0.06} and N_{coll}^{0.83 \pm 0.05} is observed. For the
charged particle pseudorapidity density at midrapidity we find a scaling as
N_{part}^{1.07 \pm 0.04} and N_{coll}^{0.82 \pm 0.03}. This faster than linear
scaling with N_{part} indicates a violation of the naive Wounded Nucleon Model.Comment: 13 pages, 16 figures, submitted to European Physical Journal C
(revised results for scaling exponents
Challenges in QCD matter physics - The Compressed Baryonic Matter experiment at FAIR
Substantial experimental and theoretical efforts worldwide are devoted to
explore the phase diagram of strongly interacting matter. At LHC and top RHIC
energies, QCD matter is studied at very high temperatures and nearly vanishing
net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was
created at experiments at RHIC and LHC. The transition from the QGP back to the
hadron gas is found to be a smooth cross over. For larger net-baryon densities
and lower temperatures, it is expected that the QCD phase diagram exhibits a
rich structure, such as a first-order phase transition between hadronic and
partonic matter which terminates in a critical point, or exotic phases like
quarkyonic matter. The discovery of these landmarks would be a breakthrough in
our understanding of the strong interaction and is therefore in the focus of
various high-energy heavy-ion research programs. The Compressed Baryonic Matter
(CBM) experiment at FAIR will play a unique role in the exploration of the QCD
phase diagram in the region of high net-baryon densities, because it is
designed to run at unprecedented interaction rates. High-rate operation is the
key prerequisite for high-precision measurements of multi-differential
observables and of rare diagnostic probes which are sensitive to the dense
phase of the nuclear fireball. The goal of the CBM experiment at SIS100
(sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD
matter: the phase structure at large baryon-chemical potentials (mu_B > 500
MeV), effects of chiral symmetry, and the equation-of-state at high density as
it is expected to occur in the core of neutron stars. In this article, we
review the motivation for and the physics programme of CBM, including
activities before the start of data taking in 2022, in the context of the
worldwide efforts to explore high-density QCD matter.Comment: 15 pages, 11 figures. Published in European Physical Journal
Freeze-Out Parameters in Central 158AGeV Pb+Pb Collisions
Neutral pion production in central 158AGeV Pb+Pb collisions has been studied
in the WA98 experiment at the CERN SPS. The pi0 transverse mass spectrum has
been analyzed in terms of a thermal model with hydrodynamic expansion. The high
accuracy and large kinematic coverage of the measurement allow to limit
previously noted ambiguities in the extracted freeze-out parameters. The
results are shown to be sensitive to the shape of the velocity distribution at
freeze-out.Comment: 5 pages including 3 figures, small changes due to review process,
accepted for publication in Phys.Rev.Let
Direct Photon Production in 158 AGeV Pb+Pb Collisions
A measurement of direct photon production in Pb+Pb collisions at 158 AGeV has
been carried out in the CERN WA98 experiment. The invariant yield of direct
photons in central collisions is extracted as a function of transverse momentum
in the interval 0.5 < pT < 4 GeV/c. A significant direct photon signal,
compared to statistical and systematical errors, is seen at pT > 1.5 GeV/c. The
results constitute the first observation of direct photons in ultrarelativistic
heavy-ion collisions which could be significant for diagnosis of quark gluon
plasma formation.Comment: Talk presented at Nucleus-Nucleus 2000, Strasbourg, Franc
Long-Chain Polyunsaturated Fatty Acids in the Green Microalga Lobosphaera incisa Contribute to Tolerance to Abiotic Stresses
Lobosphaera incisa is a green microalga that accumulates high levels of the valuable omega-6 long-chain polyunsaturated fatty acids (LC-PUFA) arachidonic acid (ARA, 20:4n-6) in triacylglycerols (TAG) under nitrogen (N) starvation. LC-PUFA accumulation is a rare trait in photosynthetic microalgae with insufficiently understood physiological significance. In this study, RNAi was attempted, for the first time in L. incisa, to produce knockdown lines for the Δ5 desaturase gene. Two lines, termed modified lines, which were isolated during screening for transgenic events, demonstrated alterations in their LC-PUFA profile, ARA-biosynthesis gene expression and lipid class distribution. In line M5-78, which appeared to carry a mutation in the Δ6 elongase gene, LC-PUFA were substituted by 18:3n-6 in all glycerolipids. Line M2-35, for which the exact genetic background has not been established, displayed a dramatic reduction in 20:4n-6, concomitant with an augmented proportion of 18:1n-9, in particular in the extraplastidial membrane lipids and TAG. The physiological responses of the modified lines to stressful conditions were compared with the wild type and the Δ5 desaturase mutant. In the N-replete cells of modified lines, the frequency of lipid droplets was reduced, while a number of starch grains increased, suggesting altered partitioning of assimilated carbon into reserve products. Furthermore, both lines exhibited reduced ability to accumulate TAG under N deprivation and recover from N starvation. Both lines demonstrated lower photosynthetic pigment contents, impairments in photosynthesis under a range of stressful conditions, and less efficient functioning of photoprotection under optimal conditions. Possible implications of fatty acids modifications in the stress response of L. incisa are addressed. � The Author(s) 2019. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: [email protected]
- …