5 research outputs found
Improving the estimation of canopy cover from UAV-LiDAR data using a pit-free CHM-based method
Accurate and rapid estimation of canopy cover (CC) is crucial for many ecological and environmental models and for forest management. Unmanned aerial vehicle-light detecting and ranging (UAV-LiDAR) systems represent a promising tool for CC estimation due to their high mobility, low cost, and high point density. However, the CC values from UAV-LiDAR point clouds may be underestimated due to the presence of large quantities of within-crown gaps. To alleviate the negative effects of within-crown gaps, we proposed a pit-free CHM-based method for estimating CC, in which a cloth simulation method was used to fill the within-crown gaps. To evaluate the effect of CC values and within-crown gap proportions on the proposed method, the performance of the proposed method was tested on 18 samples with different CC values (40â70%) and 6 samples with different within-crown gap proportions (10â60%). The results showed that the CC accuracy of the proposed method was higher than that of the method without filling within-crown gaps (R2â=â0.99 vs 0.98; RMSEâ=â1.49% vs 2.2%). The proposed method was insensitive to within-crown gap proportions, although the CC accuracy decreased slightly with the increase in within-crown gap proportions
Automated Marker-Free Registration of Multisource Forest Point Clouds Using a Coarse-to-Global Adjustment Strategy
Terrestrial laser scanning (TLS) and unmanned aerial vehicles (UAVs) are two effective platforms for acquiring forest point clouds. TLS has an advantage in the acquisition of below-canopy information but does not include the data above the canopy. UAVs acquire data from the top viewpoint but are confined to the information above the canopy. To obtain complete forest point clouds and exploit the application potential of multiple platforms in large-scale forest scenarios, we propose a practical pipeline to register multisource point clouds automatically. We consider the spatial distribution differences of trees and achieve the coarse alignment of multisource point clouds without artificial markers; then, the iterative closest point method is used to improve the alignment accuracy. Finally, a graph-based adjustment is designed to remove accumulative errors and achieve the gapless registration. The experimental results indicate high efficiency and accuracy of the proposed method. The mean errors for the registration of multi-scan TLS point clouds subsampled at 0.03 m are approximately 0.01 m, and the mean errors for registration of the TLS and UAV data are less than 0.03 m in the horizontal direction and approximately 0.01 m in the vertical direction
A novel and efficient method for woodâleaf separation from terrestrial laser scanning point clouds at the forest plot level
With the increasing use of terrestrial laser scanning (TLS) technology in the field of forest ecology, a large number of studies have been carried out on the separation of wood and leaves based on TLS point cloud data. However, most woodâleaf separation methods adopt the point-wise classification strategy, which is not efficient for processing large-volume TLS datasets acquired at the forest plot level. In this study, we proposed a segment-wise classification strategy to improve the efficiency of the woodâleaf separation from large-volume TLS point cloud datasets collected at the forest plot. The proposed method first decomposes the point cloud into three parts based on the threshold values of its local curvature. Then, the first two parts with lower local curvatures were segmented respectively by a connected component labelling algorithm. Finally, the segmented point clouds were classified into wood or leaf segments according to the segment-wise geometric features of each segment. We tested our method on both needleleaf and broadleaf forest plots in temperate and tropical forests. We also compared our method with two other state-of-the-art woodâleaf separation methods, that is, the CANUPO and LeWoS. The results showed that our method was more than 10 times faster than the compared methods while maintaining comparable and even higher accuracy. Our study demonstrates that the segment-wise classification strategy applies to the large-volume TLS datasets and can greatly improve the efficiency of the classification. The proposed method is simple, fast and universally applicable to the TLS data from various tree species and forest types at the plot level, which may facilitate the adoption of TLS technology by forest ecologists in their studies
Single Scanner BLS System for Forest Plot Mapping
International audienceThe 3-D information collected from sample plots is significant for forest inventories. Terrestrial laser scanning (TLS) has been demonstrated to be an effective device in data acquisition of forest plots. Although TLS is able to achieve precise measurements, multiple scans are usually necessary to collect more detailed data, which generally requires more time in scan preparation and field data acquisition. In contrast, mobile laser scanning (MLS) is being increasingly utilized in mapping due to its mobility. However, the geometrical peculiarity of forests introduces challenges. In this article, a test backpack-based MLS system, i.e., backpack laser scanning (BLS), is designed for forest plot mapping without a global navigation satellite system/inertial measurement unit (GNSS-IMU) system. To achieve accurate matching, this article proposes to combine the line and point features for calculating transformation, in which the line feature is derived from trunk skeletons. Then, a scan-to-map matching strategy is proposed for correcting positional drift. Finally, this article evaluates the effectiveness and the mapping accuracy of the proposed method in forest sample plots. The experimental results indicate that the proposed method achieves accurate forest plot mapping using the BLS; meanwhile, compared to the existing methods, the proposed method utilizes the geometric attributes of the trees and reaches a lower mapping error, in which the mean errors and the root square mean errors for the horizontal/vertical direction in plots are less than 3 cm
SLAM-aided forest plot mapping combining terrestrial and mobile laser scanning
International audiencePrecise structural information collected from plots is significant in the management of and decision-making regarding forest resources. Currently, laser scanning is widely used in forestry inventories to acquire three-dimensional (3D) structural information. There are three main data-acquisition modes in ground-based forest measurements: single-scan terrestrial laser scanning (TLS), multi-scan TLS and multi-single-scan TLS. Nevertheless, each of these modes causes specific difficulties for forest measurements. Due to occlusion effects, the single-scan TLS mode provides scans for only one side of the tree. The multi-scan TLS mode overcomes occlusion problems, however, at the cost of longer acquisition times, more human labor and more effort in data preprocessing. The multi-single-scan TLS mode decreases the workload and occlusion effects but lacks the complete 3D reconstruction of forests. These problems in TLS methods are largely avoided with mobile laser scanning (MLS); however, the geometrical peculiarity of forests (e.g., similarity between tree shapes, placements, and occlusion) complicates the motion estimation and reduces mapping accuracy.Therefore, this paper proposes a novel method combining single-scan TLS and MLS for forest 3D data acquisition. We use single-scan TLS data as a reference, onto which we register MLS point clouds, so they fill in the omission of the single-scan TLS data. To register MLS point clouds on the reference, we extract virtual feature points that are sampling the centerlines of tree stems and propose a new optimization-based registration framework. In contrast to previous MLS-based studies, the proposed method sufficiently exploits the natural geometric characteristics of trees. We demonstrate the effectiveness, robustness, and accuracy of the proposed method on three datasets, from which we extract structural information. The experimental results show that the omission of tree stem data caused by one scan can be compensated for by the MLS data, and the time of the field measurement is much less than that of the multi-scan TLS mode. In addition, single-scan TLS data provide strong global constraints for MLS-based forest mapping, which allows low mapping errors to be achieved, e.g., less than 2.0 cm mean errors in both the horizontal and vertical directions