Hysteresis and precession of a swirling jet normal to a wall

Interaction of a swirling jet with a no-slip surface has striking features of fundamental and practical interest. Different flow states and transitions among them occur at the same conditions in combustors, vortex tubes, and tornadoes. The jet axis can undergo precession and bending in combustors; this precession enhances large-scale mixing and reduces emissions of NOx. To explore the mechanisms of these phenomena, we address conically similar swirling jets normal to a wall. In addition to the Serrin model of tornadolike flows, a new model is developed where the flow is singularity free on the axis. New analytical and numerical solutions of the Navier-Stokes equations explain occurrence of multiple states and show that hysteresis is a common feature of wall-normal vortices or swirling jets no matter where sources of motion are located. Then we study the jet stability with the aid of a new approach accounting for deceleration and nonparallelism of the base flow. An appropriate transformation of variables reduces the stability problem for this strongly nonparallel flow to a set of ordinary differential equations. A particular flow whose stability is studied in detail is a half-line vortex normal to a rigid plane-a model of a tornado and of a swirling jet issuing from a nozzle in in a combustor. Helical counter-rotating disturbances appear to be first growing as Reynolds number increases. Disturbance frequency changes its sign along the neutral curve while the wave number remains positive. Short disturbance waves propagate downstream and long waves propagate upstream. This helical instability causes bending of the vortex axis and its precession-the effects observed in technological flows and in tornadoes.V. Shtern, J. M

Hysteresis and precession of a swirling jet normal to a wall

Interaction of a swirling jet with a no-slip surface has striking features of fundamental and practical interest. Different flow states and transitions among them occur at the same conditions in combustors, vortex tubes, and tornadoes. The jet axis can undergo precession and bending in combustors; this precession enhances large-scale mixing and reduces emissions of NOx. To explore the mechanisms of these phenomena, we address conically similar swirling jets normal to a wall. In addition to the Serrin model of tornadolike flows, a new model is developed where the flow is singularity free on the axis. New analytical and numerical solutions of the Navier-Stokes equations explain occurrence of multiple states and show that hysteresis is a common feature of wall-normal vortices or swirling jets no matter where sources of motion are located. Then we study the jet stability with the aid of a new approach accounting for deceleration and nonparallelism of the base flow. An appropriate transformation of variables reduces the stability problem for this strongly nonparallel flow to a set of ordinary differential equations. A particular flow whose stability is studied in detail is a half-line vortex normal to a rigid plane-a model of a tornado and of a swirling jet issuing from a nozzle in in a combustor. Helical counter-rotating disturbances appear to be first growing as Reynolds number increases. Disturbance frequency changes its sign along the neutral curve while the wave number remains positive. Short disturbance waves propagate downstream and long waves propagate upstream. This helical instability causes bending of the vortex axis and its precession-the effects observed in technological flows and in tornadoes.V. Shtern, J. M

The nighttime ionosphere of Mars from Mars-4 and Mars-5 radio occultation dual-frequency measurements

Dual frequency radio sounding of the Martian nighttime ionosphere was carried out during the exits from behind the planet of the Mars-4 spacecraft on February 2, 1974 and the Mars-5 spacecraft on February 18, 1974. In these experiments, the spacecraft transmitter emitted two coherent monochromatic signals in decimeter and centimeter wavelength ranges. At the Earth receiving station, the reduced phase difference (or frequencies) of these signals was measured. The nighttime ionosphere of Mars measured in both cases had a peak electron density of approximately 5 X 1,000/cu cm at an altitude of 110 to 130 km. At the times of spacecraft exit, the solar zenith angles at the point of occultation were 127 deg and 106 deg, respectively. The height profiles of electron concentration were obtained assuming spherical symmetry of the Martian ionosphere

Column formation and hysteresis in a two-fluid tornado

Ponencia de: 6th International Conference Heat and Mass Transfer and Hydrodynamics in Swirling Flows 21–23 November 2017, Novosibirsk, Russian FederationThis experimental and numerical study addresses a flow of water and sunflower oil. This flow is driven by the rotating lid in a sealed vertical cylinder. The experiments were performed in a glass container with a radius of 45 mm and a height of 45 mm with the water volume fraction of 20%. Different densities and immiscibility of liquids provide the stable and sharp interface. At the rest, the interface is flat and horizontal. As the rotation speeds up, a new water-flow cell emerges near the bottom center. This cell expands and occupies almost the entire water domain while the initial water circulation shrinks into a thin layer adjacent to the interface. The water, rising near the container axis, strongly deforms the interface (upward near the axis and downward near the sidewall). A new oil-flow cell emerges above the interface near the axis. This cell disappears as the interface approaches the lid. The water separates from the sidewall, reaches the lid, and forms a column. As the rotation is decreased, the scenario reverses, but the flow states differ from those for the increasing rotation, i.e., a hysteresis is observed. The numerical simulations agree with the experiment and help explain the flow metamorphoses.Russian Science Foundation 14-29-0009

Long-Wave Instability of Advective Flows in Inclined Layer with Solid Heat Conductive Boundaries

We investigate the stability of the steady convective flow in a plane tilted layer with ideal thermal conductivity of solid boundaries in the presence of uniform longitudinal temperature gradient. Analytically found the stability boundary with respect to the long-wave perturbations, find the critical Grashof number for the most dangerous among them of even spiral perturbation.Comment: in Russian, 18 pages, 5 figures, submited to Appl. mechanics and physics, RAS Siberian brunch, Novosibirsk, Russia; Key words: advective flow, oblique layer, a longitudinal temperature gradient, long-wave instabilit

SOME ABSTRACT PROPERTIES OF SEMIGROUPS APPEARING IN SUPERCONFORMAL THEORIES

A new type of semigroups which appears while dealing with $N=1$ superconformal symmetry in superstring theories is considered. The ideal series having unusual abstract properties is constructed. Various idealisers are introduced and studied. The ideal quasicharacter is defined. Green's relations are found and their connection with the ideal quasicharacter is established.Comment: 11 page

Compaction and flow rule of oxide nanopowders

Transparent Al2O3 ceramics have attracted considerable interest for use in a wide range of optical, electronic and structural applications. The fabrication of these ceramics using powder metallurgy processes requires the development of theoretical approaches to the compaction of nanopowders. In this work, we investigate the compaction processes of two model granular systems imitating Al2O3 nanosized powders. System I is a loosely aggregated powder, and system II is a powder strongly inclined to agglomeration (for instance, calcined powder). The processes of isostatical (uniform), biaxial, and uniaxial compaction as well as uniaxial compaction with simultaneous shear deformation are studied. The energy parameters of compaction such as the energy change of elastic interparticle interactions and dispersion interactions, dissipative energy losses related to the processes of interparticle friction, and the total work of compaction are calculated for all the processes. The nonapplicability of the associated flow rule to the description of deformation processes of oxide nanopowders is shown and an alternative plastic flow rule is suggested. A complete system of determining the relationship of the flow including analytical approximations of yield surfaces is obtained. © 2016 Elsevier B.V

Scalable Massively Parallel Artificial Neural Networks

There is renewed interest in computational intelligence, due to advances in algorithms, neuroscience, and computer hardware. In addition there is enormous interest in autonomous vehicles (air, ground, and sea) and robotics, which need significant onboard intelligence. Work in this area could not only lead to better understanding of the human brain but also very useful engineering applications. The functioning of the human brain is not well understood, but enormous progress has been made in understanding it and, in particular, the neocortex. There are many reasons to develop models of the brain. Artificial Neural Networks (ANN), one type of model, can be very effective for pattern recognition, function approximation, scientific classification, control, and the analysis of time series data. ANNs often use the back-propagation algorithm for training, and can require large training times especially for large networks, but there are many other types of ANNs. Once the network is trained for a particular problem, however, it can produce results in a very short time. Parallelization of ANNs could drastically reduce the training time. An object-oriented, massively-parallel ANN (Artificial Neural Network) software package SPANN (Scalable Parallel Artificial Neural Network) has been developed and is described here. MPI was use