15 research outputs found
Milagrito: a TeV air-shower array
Milagrito, a large, covered water-Cherenkov detector, was the world's first
air-shower-particle detector sensitive to cosmic gamma rays below 1 TeV. It
served as a prototype for the Milagro detector and operated from February 1997
to May 1998. This paper gives a description of Milagrito, a summary of the
operating experience, and early results that demonstrate the capabilities of
this technique.Comment: 38 pages including 24 figure
On the sensitivity of the HAWC observatory to gamma-ray bursts
We present the sensitivity of HAWC to Gamma Ray Bursts (GRBs). HAWC is a very
high-energy gamma-ray observatory currently under construction in Mexico at an
altitude of 4100 m. It will observe atmospheric air showers via the water
Cherenkov method. HAWC will consist of 300 large water tanks instrumented with
4 photomultipliers each. HAWC has two data acquisition (DAQ) systems. The main
DAQ system reads out coincident signals in the tanks and reconstructs the
direction and energy of individual atmospheric showers. The scaler DAQ counts
the hits in each photomultiplier tube (PMT) in the detector and searches for a
statistical excess over the noise of all PMTs. We show that HAWC has a
realistic opportunity to observe the high-energy power law components of GRBs
that extend at least up to 30 GeV, as it has been observed by Fermi LAT. The
two DAQ systems have an energy threshold that is low enough to observe events
similar to GRB 090510 and GRB 090902b with the characteristics observed by
Fermi LAT. HAWC will provide information about the high-energy spectra of GRBs
which in turn could help to understanding about e-pair attenuation in GRB jets,
extragalactic background light absorption, as well as establishing the highest
energy to which GRBs accelerate particles
Recommended from our members
Design validation of the PBFA-Z vacuum insulator stack
Sandia has developed PBFA-Z, a 20-MA driver for z-pinch experiments by replacing the water lines, insulator stack. and MITLs on PBFA II with hardware of a new design. The PBFA-Z accelerator was designed to deliver 20 MA to a 15-mg z-pinch load in 100 ns. The accelerator was modeled using circuit codes to determine the time-dependent voltage and current waveforms at the input and output of the water lines, the insulator stack, and the MITLs. The design of the vacuum insulator stack was dictated by the drive voltage, the electric field stress and grading requirements, the water line and MITL interface requirements, and the machine operations and maintenance requirements. The insulator stack consists of four separate modules, each of a different design because of different voltage drive and hardware interface requirements. The shape of the components in each module, i.e., grading rings, insulator rings, flux excluders, anode and cathode conductors, and the design of the water line and MITL interfaces, were optimized by using the electrostatic analysis codes, ELECTRO and JASON. The time-dependent performance of the insulator stacks was evaluated using IVORY, a 2-D PIC code. This paper will describe the insulator stack design, present the results of the ELECTRO and IVORY analyses, and show the results of the stack measurements
Recommended from our members
Design and analysis of the PBFA-Z vacuum insulator stack
Sandia is developing PBFA-Z, a 20-MA driver for z-pinch experiments by replacing the water lines, insulator stack, and MITLs on PBFA II with new hardware. The design of the vacuum insulator stack was dictated by the drive voltage, the electric field stress and grading requirements, the water line and MITL interface requirements, and the machine operations and maintenance requirements. The insulator stack will consist of four separate modules, each of a different design because of different voltage drive and hardware interface requirements. The shape of the components in each module, i.e., grading rings, insulator rings, flux excluders, anode and cathode conductors, and the design of the water line and MITL interfaces, were optimized by using the electrostatic analysis codes, ELECTRO and JASON. The time dependent performance of the insulator stack was evaluated using IVORY, a 2-D PIC code. This paper will describe the insulator stack design and present the results of the ELECTRO and IVORY analyses
Recommended from our members
Investigation of the Effects of Waterline Switch Capacitance on the Electrical Prepulse of the Z-Accelerator
The Z-accelerator at the Sandia National Laboratories (SNL) was modified in 1996 to deliver a 20 MA pulse to a z-pinch load in 100 ns. The pulsed-power driver is a 36-module waterline accelerator. Each waterline contains four self-break switches as part of the pulse-forming section. A study was conducted to investigate the effects of increasing the capacitance of the waterline switches on the shape of the electrical prepulse at the load. Past studies have shown that increasing the prepulse at the z-pinch load increases the x-ray output power. In this study, one set of switches with its surrounding waterline hardware was modeled in 3-D and capacitance calculated using the electrostatic code, COULOME. The capacitance values were used in a SCREAMER model of the Z-accelerator. SCREAMER an SNL developed, lumped-element circuit code was used to calculate the time-dependent current waveforms delivered to the z-pinch load. The design was changed and a new capacitance matrix and output waveforms were calculated. This paper presents the results of the COULOMB 3-D modeling, and the SCREAMER circuit-model analyses
An Investigation into the ASTM E756-05 Test Standard Accuracy on Determining the Damping Properties of Materials in Tension-Compression
The Study of TeV Variability and the Duty Cycle of Mrk 421 from 3 Yr of Observations with the Milagro Observatory
International audienceTeV-flaring activity with timescales as short as tens of minutes and an orphan TeV flare have been observed from the blazar Markarian 421 (Mrk 421). The TeV emission from Mrk 421 is believed to be produced by leptonic synchrotron self-Compton (SSC) emission. In this scenario, correlations between the X-ray and the TeV fluxes are expected, TeV orphan flares are hardly explained, and the activity (measured as duty cycle) of the source at TeV energies is expected to be equal to or less than that observed in X-rays if only SSC is considered. To estimate the TeV duty cycle of Mrk 421 and to establish limits on its variability at different timescales, we continuously observed Mrk 421 with the Milagro observatory. Mrk 421 was detected by Milagro with a statistical significance of 7.1 standard deviations between 2005 September 21 and 2008 March 15. The observed spectrum is consistent with previous observations by VERITAS. We estimate the duty cycle of Mrk 421 for energies above 1 TeV for different hypotheses of the baseline flux and for different flare selections and we compared our results with the X-ray duty cycle estimated by Resconi et al. The robustness of the results is discussed