Semi-implicit and fully implicit shock-capturing methods for hyperbolic conservation laws with stiff source terms

Some numerical aspects of finite-difference algorithms for nonlinear multidimensional hyperbolic conservation laws with stiff nonhomogenous (source) terms are discussed. If the stiffness is entirely dominated by the source term, a semi-implicit shock-capturing method is proposed provided that the Jacobian of the soruce terms possesses certain properties. The proposed semi-implicit method can be viewed as a variant of the Bussing and Murman point-implicit scheme with a more appropriate numerical dissipation for the computation of strong shock waves. However, if the stiffness is not solely dominated by the source terms, a fully implicit method would be a better choice. The situation is complicated by problems that are higher than one dimension, and the presence of stiff source terms further complicates the solution procedures for alternating direction implicit (ADI) methods. Several alternatives are discussed. The primary motivation for constructing these schemes was to address thermally and chemically nonequilibrium flows in the hypersonic regime. Due to the unique structure of the eigenvalues and eigenvectors for fluid flows of this type, the computation can be simplified, thus providing a more efficient solution procedure than one might have anticipated

Land use change detection with LANDSAT-2 data for monitoring and predicting regional water quality degradation

The author has identified the following significant results. Comparison between LANDSAT 1 and 2 imagery of Arkansas provided evidence of significant land use changes during the 1972-75 time period. Analysis of Arkansas historical water quality information has shown conclusively that whereas point source pollution generally can be detected by use of water quality data collected by state and federal agencies, sampling methodologies for nonpoint source contamination attributable to surface runoff are totally inadequate. The expensive undertaking of monitoring all nonpoint sources for numerous watersheds can be lessened by implementing LANDSAT change detection analyses

Does Antarctic Krill Employ Body Shrinkage as an Overwintering Strategy?

To determine if Antarctic krill employ body shrinkage as one of its overwintering mechanisms in the field, Euphausia superba and Euphausia crystallorophias were collected during fall and winter in and around Marguerite Bay through US Southern Ocean GLOBEC field programs during fall and winter 2001 and 2002. The relationships between the body length and weight of both krill species were exponentially correlated with no significant differences between the two species (p\u3e0.05). The ratio between eye diameter and body length of individual krill was examined in an expectation that it could be used as an indicator of the body shrinkage as previously suggested by Shin and Nicol (2002). These ratios were significantly different between the two krill species. Especially, E. crystallorophias had bigger eyes than E. superba. In both krill species, eye diameters were highly correlated with body lengths (regression coefficients ≥ 0.70). For E. crystallorophias, no significant differences of the ratio of eye diameter/body length were detected between fall and winter. Even though the ratios for E. superba were seasonally varied, it was not clear whether body shrinkage was an actual and critical overwintering mechanism for the krill population found in this study area. These results suggest that some individuals of E. superba might experience the body shrinkage during a part of their life, but this morphological index alone (eye diameter/body length) may be insufficient to unambiguously separate the shrunk krill from the non-shrunk ones in the field-collected animals

Reducing Interanalyst Variability in Photovoltaic Degradation Rate Assessments

The economic return on investment of a commercial photovoltaic system depends greatly on its performance over the long term and, hence, its degradation rate. Many methods have been proposed for assessing system degradation rates from outdoor performance data. However, comparing reported values from one analyst and research group to another requires a common baseline of performance; consistency between methods and analysts can be a challenge. An interlaboratory study was conducted involving different volunteer analysts reporting on the same photovoltaic performance data using different methodologies. Initial variability of the reported degradation rates was so high that analysts could not come to a consensus whether a system degraded or not. More consistent values are received when written guidance is provided to each analyst. Further improvements in analyst variance was accomplished by using the free open-source software RdTools, allowing a reduction in variance between analysts by more than two orders of magnitude over the first round, where multiple analysis methods are allowed. This article highlights many pitfalls in conducting 'routine' degradation analysis, and it addresses some of the factors that must be considered when comparing degradation results reported by different analysts or methods

Threshold meson production and cosmic ray transport

An interesting accident of nature is that the peak of the cosmic ray spectrum, for both protons and heavier nuclei, occurs near the pion production threshold. The Boltzmann transport equation contains a term which is the cosmic ray flux multiplied by the cross section. Therefore when considering pion and kaon production from proton-proton reactions, small cross sections at low energy can be as important as larger cross sections at higher energy. This is also true for subthreshold kaon production in nuclear collisions, but not for subthreshold pion production.Comment: 9 pages, 1 figur

Fabrication and evaluation of superplastically formed/weld-brazed corrugated compression panels with beaded webs

A study was made to investigate the feasibility of superplastically forming corrugated panels with beaded webs and to demonstrate the structural integrity of these panels by testing. The test panels in the study consist of superplastically formed titanium alloy Ti-6Al-4V half-hat elements that are joined by weld-brazing to titanium alloy Ti-6Al-4V caps to form either single-corrugation compression panels or multiple-corrugation compression panels. Stretching and subsequent thinning of the titanium sheet during superplastic forming is reduced by approximately 35 percent with a shallow half-hat die concept instead of a deep die concept and results in a more uniform thickness across the beaded webs. The complete panels are tested in end compression at room temperature and the results compared with analysis. The heavily loaded panels failed at loads approaching the yield strength of the titanium material. At maximum load, the caps wrinkled locally accompanied with separation of the weld-braze joint in the wrinkle. None of the panels tested, however, failed catastrophically in the weld-braze joint. Experimental test results are in good agreement with structural analysis of the panels

Improved Spacecraft Materials for Radiation Shielding

In the execution of this proposal, we will first examine current and developing spacecraft materials and evaluate their ability to attenuate adverse biological mutational events in mammalian cell systems and reduce the rate of cancer induction in mice harderian glands as a measure of their protective qualities. The HZETRN code system will be used to generate a database on GCR attenuation in each material. If a third year of funding is granted, the most promising and mission-specific materials will be used to study the impact on mission cost for a typical Mars mission scenario as was planned in our original two year proposal at the original funding level. The most promising candidate materials will be further tested as to their transmission characteristics in Fe and Si ion beams to evaluate the accuracy of the HZETRN transmission factors. Materials deemed critical to mission success may also require testing as well as materials developed by industry for their radiation protective qualities (e.g., Physical Sciences Inc.) A study will be made of designing polymeric materials and composite materials with improved radiation shielding properties as well as the possible improvement of mission-specific materials