52,323 research outputs found
Superconducting properties of Gd-Ba-Cu-O single grains processed from a new, Ba-rich precursor compound
Gd-Ba-Cu-O (GdBCO) single grains have been previously melt-processed successfully in air using a generic Mg-Nd-Ba-Cu-O (Mg-NdBCO) seed crystal. Previous research has revealed that the addition of a small amount of BaO2 to the precursor powders prior to melt processing can suppress the formation of Gd/Ba solid solution, and lead to a significant improvement in superconducting properties of the single grains. Research into the effects of a higher Ba content on single grain growth, however, has been limited by the relatively small grain size in the earlier studies. This has been addressed by developing Ba-rich precursor compounds Gd-163 and Gd-143, fabricated specifically to enable the presence of greater concentrations of Ba during the melt process. In this study, we propose a new processing route for the fabrication of high performance GdBCO single grain bulk superconductors in air by enriching the precursor powder with these new Ba rich compounds. The influence of the addition of the new compounds on the microstructures and superconducting properties of GdBCO single grains is reported
Growth rate and superconducting properties of Gd-Ba-Cu-O bulk superconductors melt processed in air
A generic Mg-doped Nd-Ba-Cu-O seed crystal has been developed recently for the fabrication of any type of rare earth (RE) based (RE)-Ba-Cu-O single grain bulk superconductor in air. The new generic seed simplifies significantly the top seeded melt growth (TSMG) process for light rare earth based (Nd, Sm, Gd, or mixed rare earth elements) bulk superconductors, in particular. GdBCO single grains have been fabricated successfully in air using the new seed in a cold-seeding process. In this study, precursor powders were enriched with different amounts of BaO2 to investigate the extent of substitution of Gd for Ba in the Gd1+xBa2-xCu3O7-delta solid solution phase. The growth process of large single grains in air was investigated at various growth temperatures under isothermal processing conditions. Crystal growth rate as a function of under-cooling and BaO2 content has been determined from these experiments. The spatial variation of Tc and transition temperature width for applied field aligned along the a/b and c-axis of grains fabricated with different BaO2 content has also been investigated in order to understand the extent of the formation of Gd/Ba solid solution with varying growth temperature and precursor composition. These results have been used to establish the optimum conditions for fabricating solid solution-free, large single grains of GdBCO in air
Recommended from our members
The role of hypothalamus-pituitary-adrenal (HPA)-like axis in inflammatory pilosebaceous disorders
Skin is the largest peripheral endocrine organ and functions as a hormone target and endocrine gland. A cutaneous hypothalamus-pituitary-adrenal (HPA)-like axis enables the skin to respond to stress and regulates its steroidogenic activity. The pilosebaceous unit is a site for production and metabolism of a number of steroid hormones, including stress and sex hormones. This is an overview of the important role that the cutaneous HPA-like-axis plays in the pathogenesis and treatment of inflammatory pilosebaceous disorders, including acne, rosacea, seborrheic dermatitis, and hidradenitis suppurativa
Non-magnetic pair-breaking effect on La(Fe_{1-x}Zn_{x})AsO_{0.85} studied by NMR and NQR
As and La NMR and nuclear quadrupole resonance (NQR) studies
on Zn-substituted LaFeAsO have been performed to investigate the
Zn-impurity effects microscopically. Although superconductivity in
LaFeAsO disappears by 3% Zn substitution, we found that NMR/NQR
spectra and NMR physical quantities in the normal state are hardly changed,
indicating that the crystal structure and electronic states are not modified by
Zn substitution. Our results suggest that the suppression of superconductivity
by Zn substitution is not due to the change of the normal-state properties, but
due to strong non-magnetic pair-breaking effect to superconductivity.Comment: 5 pages, 4 figures, This paper was chosen as "Paper of Editors'
Suggestion
Development of an integrated BEM approach for hot fluid structure interaction
A comprehensive boundary element method is presented for transient thermoelastic analysis of hot section Earth-to-Orbit engine components. This time-domain formulation requires discretization of only the surface of the component, and thus provides an attractive alternative to finite element analysis for this class of problems. In addition, steep thermal gradients, which often occur near the surface, can be captured more readily since with a boundary element approach there are no shape functions to constrain the solution in the direction normal to the surface. For example, the circular disc analysis indicates the high level of accuracy that can be obtained. In fact, on the basis of reduced modeling effort and improved accuracy, it appears that the present boundary element method should be the preferred approach for general problems of transient thermoelasticity
Development of an integrated BEM approach for hot fluid structure interaction: BEST-FSI: Boundary Element Solution Technique for Fluid Structure Interaction
As part of the continuing effort at NASA LeRC to improve both the durability and reliability of hot section Earth-to-orbit engine components, significant enhancements must be made in existing finite element and finite difference methods, and advanced techniques, such as the boundary element method (BEM), must be explored. The BEM was chosen as the basic analysis tool because the critical variables (temperature, flux, displacement, and traction) can be very precisely determined with a boundary-based discretization scheme. Additionally, model preparation is considerably simplified compared to the more familiar domain-based methods. Furthermore, the hyperbolic character of high speed flow is captured through the use of an analytical fundamental solution, eliminating the dependence of the solution on the discretization pattern. The price that must be paid in order to realize these advantages is that any BEM formulation requires a considerable amount of analytical work, which is typically absent in the other numerical methods. All of the research accomplishments of a multi-year program aimed toward the development of a boundary element formulation for the study of hot fluid-structure interaction in Earth-to-orbit engine hot section components are detailed. Most of the effort was directed toward the examination of fluid flow, since BEM's for fluids are at a much less developed state. However, significant strides were made, not only in the analysis of thermoviscous fluids, but also in the solution of the fluid-structure interaction problem
- …