12 research outputs found
The Bright Side and the Dark Side of Hybrid Organic Inorganic Perovskites
The previously developed bistable amphoteric native defect (BAND) model is
used for a comprehensive explanation of the unique photophysical properties and
for understanding the remarkable performance of perovskites as photovoltaic
materials. It is shown that the amphoteric defects in donor (acceptor)
configuration capture a fraction of photoexcited electrons (holes) dividing
them into two groups: higher energy bright and lower energy dark electrons
(holes). The spatial separation of the dark electrons and the dark holes and
the k-space separation of the bright and the dark charge carriers reduce
electron hole recombination rates, emulating the properties of an ideal
photovoltaic material with a balanced, spatially separated transport of
electrons and holes. The BAND model also offers a straightforward explanation
for the exceptional insensitivity of the photovoltaic performance of
polycrystalline perovskite films to structural and optical inhomogeneities. The
blue-shifted radiative recombination of bright electrons and holes results in a
large anti-Stokes effect that provides a quantitative explanation for the
spectral dependence of the laser cooling effect measured in perovskite
platelets
Vacancy-Ordered Double Perovskite Cs2TeI6 Thin Films for Optoelectronics
Alternatives to lead- and tin-based perovskites for photovoltaics and optoelectronics are sought that do not suffer from the disadvantages of toxicity and low device efficiency of present-day materials. Here we report a study of the double perovskite Cs2TeI6, which we have synthesized in thin film form for the first time. Exhaustive trials concluded that spin coating CsI and TeI4 using an anti-solvent method produced uniform films, confirmed as Cs2TeI6 by XRD with Rietveld analysis. They were stable up to 250°C, had an optical band gap of ~1.5 eV, absorption coefficients of ~6 x 104 cm-1, carrier lifetimes of ~2.6 ns (unpassivated 200 nm film), a work function of 4.95 eV and had p-type surface conductivity. Vibrational modes probed by Raman and FTIR spectroscopy showed resonances qualitatively consistent with DFT Phonopy-calculated spectra, offering another route for phase confirmation. It was concluded that the material is a candidate for further study as a potential optoelectronic or photovoltaic material
Materials Deforming Near their Ideal Strength
In recent years it has been shown that it is possible to design materials with strengths approaching their theoretical ideal limit. This is an intriguing development; materials typically fail at stresses that are several orders of magnitude below their theoretical limits of strength. The development of engineering alloys with usable strengths near the ideal limit would have profound technological implications. The most common approach used to increase a material's strength, is grain refinement. This method has been used to produce nanograined hollow nanospheres of CdS. Under nanoindentation these spheres show remarkable strength and deformation properties. The stresses and strains in the shells are studied with linear elastic finite element analyses and from this a failure criterion is developed. The stresses predicted by the failure criteria are 2.2 GPa, which is very large for an inherently brittle material. We compare the failure stress to the calculated ideal strength for CdS, calculated using density functional theory. Comparing the stress predicted by the failure criteria to the ideal strength shows that the hallow nanospheres approach 70% of their ideal strength. In 2003 a new Ti, Nb based alloy "Gum Metal" was introduced by Toyota Research Corp. This alloy has strength approaching the ideal limit even in bulk form. Moreover, the material deforms in a novel fashion without the obvious participation of dislocations. A Ti-V alloy has been chosen to study the properties of this type of alloy. The BCC ideal yield surface is examined as a function of composition. Dislocation core structures are also examined as a function of composition. The results explain some experimental observations in this novel system
Recommended from our members
The Linked CENTURY Study: linking three decades of clinical and public health data to examine disparities in childhood obesity
Background: Despite the need to identify the causes of disparities in childhood obesity, the existing epidemiologic studies of early life risk factors have several limitations. We report on the construction of the Linked CENTURY database, incorporating CENTURY (Collecting Electronic Nutrition Trajectory Data Using Records of Youth) Study data with birth certificates; and discuss the potential implications of combining clinical and public health data sources in examining the etiology of disparities in childhood obesity. Methods: We linked the existing CENTURY Study, a database of 269,959 singleton children from birth to age 18 years with measured heights and weights, with each child’s Massachusetts birth certificate, which captures information on their mothers’ pregnancy history and detailed socio-demographic information of both mothers and fathers. Results: Overall, 74.2 % were matched, resulting in 200,343 children in the Linked CENTURY Study with 1,580,597 well child visits. Among this cohort, 94.0 % (188,334) of children have some father information available on the birth certificate and 60.9 % (121,917) of children have at least one other sibling in the dataset. Using maternal race/ethnicity from the birth certificate as an indicator of children’s race/ethnicity, 75.7 % of children were white, 11.6 % black, 4.6 % Hispanic, and 5.7 % Asian. Based on socio-demographic information from the birth certificate, 20.0 % of mothers were non-US born, 5.9 % smoked during pregnancy, 76.3 % initiated breastfeeding, and 11.0 % of mothers had their delivery paid for by public health insurance. Using clinical data from the CENTURY Study, 22.7 % of children had a weight-for-length ≥ 95th percentile between 1 and 24 months and 12.0 % of children had a body mass index ≥ 95th percentile at ages 5 and 17 years. Conclusions: By linking routinely-collected data sources, it is possible to address research questions that could not be answered with either source alone. Linkage between a clinical database and each child’s birth certificate has created a unique dataset with nearly complete racial/ethnic and socio-demographic information from both parents, which has the potential to examine the etiology of racial/ethnic and socioeconomic disparities in childhood obesity
Active Phase on SrCo1-x Fe x O3-δ (0 ≤ x ≤ 0.5) Perovskite for Water Oxidation: Reconstructed Surface versus Remaining Bulk.
Funder: National Research Foundation SingaporePerovskite oxides based on earth-abundant transition metals have been extensively explored as promising oxygen evolution reaction (OER) catalysts in alkaline media. The (electro)chemically induced transformation of their initially crystalline surface into an amorphous state has been reported for a few highly active perovskite catalysts. However, little knowledge is available to distinguish the contribution of the amorphized surface from that of the remaining bulk toward the OER. In this work, we utilize the promoting effects of two types of Fe modification, i.e., bulk Fe dopant and Fe ions absorbed from the electrolyte, on the OER activity of SrCoO3-δ model perovskite to identify the active phase. Transmission electron microscopy and X-ray photoelectron spectroscopy confirmed the surface amorphization of SrCoO3-δ as well as SrCo0.8Fe0.2O3-δ after potential cycling in Fe-free KOH solution. By further cycling in Fe-spiked electrolyte, Fe was incorporated into the amorphized surface of SrCoO3-δ (SrCoO3-δ + Fe3+), yielding approximately sixfold increase in activity. Despite the difference in remaining perovskites, SrCoO3-δ + Fe3+ and SrCo0.8Fe0.2O3-δ exhibited remarkably similar activity. These results reflect that the in situ developed surface species are directly responsible for the measured OER activity, whereas the remaining bulk phases have little impact
Recommended from our members
Active Phase on SrCo1-x Fe x O3-δ (0 ≤ x ≤ 0.5) Perovskite for Water Oxidation: Reconstructed Surface versus Remaining Bulk.
Perovskite oxides based on earth-abundant transition metals have been extensively explored as promising oxygen evolution reaction (OER) catalysts in alkaline media. The (electro)chemically induced transformation of their initially crystalline surface into an amorphous state has been reported for a few highly active perovskite catalysts. However, little knowledge is available to distinguish the contribution of the amorphized surface from that of the remaining bulk toward the OER. In this work, we utilize the promoting effects of two types of Fe modification, i.e., bulk Fe dopant and Fe ions absorbed from the electrolyte, on the OER activity of SrCoO3-δ model perovskite to identify the active phase. Transmission electron microscopy and X-ray photoelectron spectroscopy confirmed the surface amorphization of SrCoO3-δ as well as SrCo0.8Fe0.2O3-δ after potential cycling in Fe-free KOH solution. By further cycling in Fe-spiked electrolyte, Fe was incorporated into the amorphized surface of SrCoO3-δ (SrCoO3-δ + Fe3+), yielding approximately sixfold increase in activity. Despite the difference in remaining perovskites, SrCoO3-δ + Fe3+ and SrCo0.8Fe0.2O3-δ exhibited remarkably similar activity. These results reflect that the in situ developed surface species are directly responsible for the measured OER activity, whereas the remaining bulk phases have little impact
Recommended from our members
Vacancy-Ordered Double Perovskite Cs2TeI6 Thin Films for Optoelectronics.
Alternatives to lead- and tin-based perovskites for photovoltaics and optoelectronics are sought that do not suffer from the disadvantages of toxicity and low device efficiency of present-day materials. Here we report a study of the double perovskite Cs2TeI6, which we have synthesized in the thin film form for the first time. Exhaustive trials concluded that spin coating CsI and TeI4 using an antisolvent method produced uniform films, confirmed as Cs2TeI6 by XRD with Rietveld analysis. They were stable up to 250 °C and had an optical band gap of ∼1.5 eV, absorption coefficients of ∼6 × 104 cm-1, carrier lifetimes of ∼2.6 ns (unpassivated 200 nm film), a work function of 4.95 eV, and a p-type surface conductivity. Vibrational modes probed by Raman and FTIR spectroscopy showed resonances qualitatively consistent with DFT Phonopy-calculated spectra, offering another route for phase confirmation. It was concluded that the material is a candidate for further study as a potential optoelectronic or photovoltaic material
Reconstruction of thiospinel to active sites and spin channels for water oxidation
Water electrolysis is a promising technique for carbon neutral hydrogen production. A great challenge remains at developing robust and low-cost anode catalysts. Many pre-catalysts are found to undergo surface reconstruction to give high intrinsic activity in the oxygen evolution reaction (OER). The reconstructed oxyhydroxides on the surface are active species and most of them outperform directly synthesized oxyhydroxides. The reason for the high intrinsic activity remains to be explored. Here, a study is reported to showcase the unique reconstruction behaviors of a pre-catalyst, thiospinel CoFe2 S4 , and its reconstruction chemistry for a high OER activity. The reconstruction of CoFe2 S4 gives a mixture with both Fe-S component and active oxyhydroxide (Co(Fe)Ox Hy ) because Co is more inclined to reconstruct as oxyhydroxide, while the Fe is more stable in Fe-S component in a major form of Fe3 S4 . The interface spin channel is demonstrated in the reconstructed CoFe2 S4 , which optimizes the energetics of OER steps on Co(Fe)Ox Hy species and facilitates the spin sensitive electron transfer to reduce the kinetic barrier of O-O coupling. The advantage is also demonstrated in a membrane electrode assembly (MEA) electrolyzer. This work introduces the feasibility of engineering the reconstruction chemistry of the precatalyst for high performance and durable MEA electrolyzers.Ministry of Education (MOE)National Research Foundation (NRF)Submitted/Accepted versionThe authors thank the support from the Singapore Ministry of Education Tier 2 Grant (MOE-T2EP10220-0001) and the Singapore National Research Foundation under its Campus for Research Excellence and Technological Enterprise (CREATE) programme, through the Cambridge Center for Carbon Reduction in Chemical Technology (C4T) and eCO2EP programmes