Characterization of transient groundwater flow through a high arch dam foundation during reservoir impounding

AbstractEven though a large number of large-scale arch dams with height larger than 200 m have been built in the world, the transient groundwater flow behaviors and the seepage control effects in the dam foundations under difficult geological conditions are rarely reported. This paper presents a case study on the transient groundwater flow behaviors in the rock foundation of Jinping I double-curvature arch dam, the world's highest dam of this type to date that has been completed. Taking into account the geological settings at the site, an inverse modeling technique utilizing the time series measurements of both hydraulic head and discharge was adopted to back-calculate the permeability of the foundation rocks, which effectively improves the uniqueness and reliability of the inverse modeling results. The transient seepage flow in the dam foundation during the reservoir impounding was then modeled with a parabolic variational inequality (PVI) method. The distribution of pore water pressure, the amount of leakage, and the performance of the seepage control system in the dam foundation during the entire impounding process were finally illustrated with the numerical results

Biomechanical analysis of sandwich vertebrae in osteoporotic patients: finite element analysis

ObjectiveThe aim of this study was to investigate the biomechanical stress of sandwich vertebrae (SVs) and common adjacent vertebrae in different degrees of spinal mobility in daily life.Materials and methodsA finite element model of the spinal segment of T10-L2 was developed and validated. Simultaneously, T11 and L1 fractures were simulated, and a 6-ml bone cement was constructed in their center. Under the condition of applying a 500-N axial load to the upper surface of T10 and immobilizing the lower surface of L2, moments were applied to the upper surface of T10, T11, T12, L1, and L2 and divided into five groups: M-T10, M-T11, M-T12, M-L1, and M-L2. The maximum von Mises stress of T10, T12, and L2 in different groups was calculated and analyzed.ResultsThe maximum von Mises stress of T10 in the M-T10 group was 30.68 MPa, 36.13 MPa, 34.27 MPa, 33.43 MPa, 26.86 MPa, and 27.70 MPa greater than the maximum stress value of T10 in the other groups in six directions of load flexion, extension, left and right lateral bending, and left and right rotation, respectively. The T12 stress value in the M-T12 group was 29.62 MPa, 32.63 MPa, 30.03 MPa, 31.25 MPa, 26.38 MPa, and 26.25 MPa greater than the T12 stress value in the other groups in six directions. The maximum stress of L2 in M-T12 in the M-L2 group was 25.48 MPa, 36.38 MPa, 31.99 MPa, 31.07 MPa, 30.36 MPa, and 32.07 MPa, which was greater than the stress value of L2 in the other groups. When the load is on which vertebral body, it is subjected to the greatest stress.ConclusionWe found that SVs did not always experience the highest stress. The most stressed vertebrae vary with the degree of curvature of the spine. Patients should be encouraged to avoid the same spinal curvature posture for a long time in life and work or to wear a spinal brace for protection after surgery, which can avoid long-term overload on a specific spine and disrupt its blood supply, resulting in more severe loss of spinal quality and increasing the possibility of fractures

Ultrafast Orbital-Oriented Control of Magnetization in Half-Metallic La0.7Sr0.3MnO3 Films

Manipulating spins by ultrafast pulse laser provides a new avenue to switch the magnetization for spintronic applications. While the spin–orbit coupling is known to play a pivotal role in the ultrafast laser-induced demagnetization, the effect of the anisotropic spin–orbit coupling on the transient magnetization remains an open issue. This study uncovers the role of anisotropic spin–orbit coupling in the spin dynamics in a half-metallic La0.7Sr0.3MnO3 film by ultrafast pump–probe technique. The magnetic order is found to be transiently enhanced or attenuated within the initial sub-picosecond when the probe light is tuned to be s- or p-polarized, respectively. The subsequent slow demagnetization amplitude follows the fourfold symmetry of the dx2 y2 orbitals as a function of the polarization angles of the probe light. A model based on the Elliott–Yafet spin-flip scatterings is proposed to reveal that the transient magnetization enhancement is related to the spin-mixed states arising from the anisotropic spin–orbit coupling. The findings provide new insights into the spin dynamics in magnetic systems with anisotropic spin–orbit coupling as well as perspectives for the ultrafast control of information process in spintronic devices

Dichotomy of Electronic Structure and Superconductivity between Single-Layer and Double-Layer FeSe/SrTiO3 Films

The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report our comparative study between the single-layer and double-layer FeSe/SrTiO3 films by performing a systematic angle-resolved photoemission study on the samples annealed in vacuum. We find that, like the single-layer FeSe/SrTiO3 film, the as-prepared double-layer FeSe/SrTiO3 film is insulating and possibly magnetic, thus establishing a universal existence of the magnetic phase in the FeSe/SrTiO3 films. In particular, the double-layer FeSe/SrTiO3 film shows a quite different doping behavior from the single-layer film in that it is hard to get doped and remains in the insulating state under an extensive annealing condition. The difference originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the origin of superconductivity and the doping mechanism in the FeSe/SrTiO3 films. The property disparity between the single-layer and double-layer FeSe/SrTiO3 films may facilitate to fabricate electronic devices by making superconducting and insulating components on the same substrate under the same condition.Comment: 19 pages, 4 figure

Reproductive biology of Sclerodermus brevicornis, a European parasitoid developing on three species of invasive longhorn beetles

The reproductive performance of Sclerodermus brevicornis (Kieffer), a bethylid wasp native to Europe, was evaluated on three species of facticious hosts. These are longhorn beetles which have recently invaded Europe from Asia: Anoplophora glabripennis (Motschulsky), Anoplophora chinensis (Forster) and Psacothea hilaris hilaris (Pascoe) (Coleoptera: Cerambycidae). Sclerodermus brevicornis attacked all three species, but offspring only developed to maturity on medium and large sized host larvae. Host species influenced the duration of parasitoid development and the number of offspring maturing, both were greatest on A. glabripennis, with up to 373 adult parasitoids emerging from a single host. The sex ratios of S. brevicornis broods were strongly female biased (ca. 9% males). We conclude that S. brevicornis has the potential to be efficiently mass-reared and actively deployed in the biological control of invasive longhorn beetles. Further progress should be encouraged by the successful use of other species of Sclerodermus against beetle pests in China

Thermoplastic Polyurethanes Stemming from Castor Oil: Green Synthesis and Their Application in Wood Bonding

We report an efficient and green approach to synthesize a linear castor oil-based polyurethane (CPU) without using any solvent or catalyst. Diol monomers were first synthesized by the aminolysis reaction between castor oil and diamines; this was accomplished within 6 h at 130 °C. Polymerization of the diols and isocyanate was further confirmed by Fourier transform infrared (FTIR), 1H-nuclear magnetic resonance (1H-NMR), and gel permeation chromatography analyses. The resultant CPUs showed a good thermal stability with an initial degradation temperature higher than 300 °C, and their mechanical and wood bonding property can be modulated by the structures of diamine. In addition, the CPUs possessed a satisfying water resistance property with the water absorption amount lower than 2%. The green conversion of castor oil to thermoplastic polyurethane affords new opportunities in bio-based industries