150 research outputs found
Sequence analysis reveals mosaic genome of Aichi virus
Aichi virus is a positive-sense and single-stranded RNA virus, which demonstrated to be related to diarrhea of Children. In the present study, phylogenetic and recombination analysis based on the Aichi virus complete genomes available in GenBank reveal a mosaic genome sequence [GenBank: FJ890523], of which the nt 261-852 region (the nt position was based on the aligned sequence file) shows close relationship with AB010145/Japan with 97.9% sequence identity, while the other genomic regions show close relationship with AY747174/German with 90.1% sequence identity. Our results will provide valuable hints for future research on Aichi virus diversity
Molecular doping enabled scalable blading of efficient hole-transport-layer-free perovskite solar cells
The efficiencies of perovskite solar cells (PSCs) are now reaching such consistently high levels that scalable manufacturing at low cost is becoming critical. However, this remains challenging due to the expensive hole-transporting materials usually employed, and difficulties associated with the scalable deposition of other functional layers. By simplifying the device architecture, hole-transport-layer-free PSCs with improved photovoltaic performance are fabricated via a scalable doctor-blading process. Molecular doping of halide perovskite films improved the conductivity of the films and their electronic contact with the conductive substrate, resulting in a reduced series resistance. It facilitates the extraction of photoexcited holes from perovskite directly to the conductive substrate. The bladed hole-transport-layerfree PSCs showed a stabilized power conversion efficiency above 20.0%. This work represents a significant step towards the scalable, cost-effective manufacturing of PSCs with both high performance and simple fabrication processes
Study on optimization of nano-coatings for ultra-sensitive biosensors based on long-period fiber grating
Bio-chemical sensors are expected to offer high sensitivity and specificity towards the detection of an analyte. It has been found that optical sensors based on long period fiber gratings (LPFGs) meet most of these requirements, particularly when coated with thin and high-refractive index overlays with proper bio-functionalization. In this paper, the influence of properties of the overlay material on the sensitivity of LPFG sensors to bio-analytes is analyzed. It has been observed that the sensitivity of a particular cladding mode of LPFG can be changed drastically with the adhesion of few tens of ‘nm’ of bio-layers to the surface of LPFG. “Volume refractive index sensitivity” and “add-layer sensitivity” of a particular cladding mode, dynamic range, and limit of detection of the sensors have been investigated in the context of overlay materials, bio-functionalization steps, and surrounding buffer medium. The selection criteria of the thin-film deposition technique are discussed with the aim of designing highly sensitive sensors for biological and chemical applications. Concept of optimum overlay thickness has been redefined and an effective case-specific design methodology is proposed
Unveiling the operation mechanism of layered perovskite solar cells
Layered perovskites have been shown to improve the stability of perovskite solar cells while its operation mechanism remains unclear. Here we investigate the process for the conversion of light to electrical current in high performance layered perovskite solar cells by examining its real morphology. The layered perovskite films in this study are found to be a mixture of layered and three dimensional (3D)-like phases with phase separations at micrometer and nanometer scale in both vertical and lateral directions. This phase separation is explained by the surface initiated crystallization process and the competition of the crystallization between 3D-like and layered perovskites. We further propose that the working mechanisms of the layered perovskite solar cells involve energy transfer from layered to 3D-like perovskite network. The impact of morphology on efficiency and stability of the hot-cast layered perovskite solar cells are also discussed to provide guidelines for the future improvement
Hand-drawn sketch and vector map matching based on topological features
In the process of addressing, when people use words to express indistinctly, they often draw simple sketches to assist expression, which helps people to form a simple spatial scene in the brain and correspond to the actual scene one by one, and finally locate and find the target address. How to establish an one-to-one mapping relationship between the spatial objects in the hand-drawn sketch and in the vector map is the key to the realization of map addressing and location, and this process is also the process of map matching. This paper aims to address difficult problems associated with the features of hand-drawn sketches and vector map matching in order to improve the use of all potential matching points designed for application in hand-drawn sketches and spatial relation matrix structures of vector maps. To accomplish this, we use the N-queen problem solving process and improve the tabu search algorithm. In the matching process under the constraint of a single spatial relationship, and the hierarchical matching process under the constraint of multiple spatial relations, this study verifies the quality of the spatial relationship and the feasibility and effectiveness of the matching method of hand-drawn sketches and vector maps using the improved tabu search algorithm
Robust estimation of bacterial cell count from optical density
Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data
A Journey into the City. Migrant Workers' Relation with the Urban Space and Struggle for Existence in Xu Zechen's Early Jingpiao Fiction
In contemporary China, rural-urban migrants constitute a new urban subject with entirely new identity-related issues. This study aims at demonstrating how literature can be a valid field in investigating such evolving subjectivities, through an analysis of Xu Zechen’s early novellas depicting migrants’ vicissitudes in Beijing. Combining a close reading of the texts and a review of the main social problems characterising rural-urban migration in China, this paper focuses on the representation of the identity crisis within the migrant self in Xu’s stories, taking into account the network of meanings employed by the writer to signify the objective and subjective tension between the city and the countryside
Wnts Promote Synaptic Assembly Through T-Cell Specific Transcription Factors in Caenorhabditis elegans
Synapses are specialized neuronal connections essential for neuronal function. Defects in synaptic assembly or maintenance usually lead to various neurological disorders. Synaptic assembly is regulated by secreted molecules such as Wnts. Wnts are a large family of conserved glycosylated signaling molecules involved in many aspects of neural development and maintenance. However, the molecular mechanisms by which Wnts regulate synaptic assembly remain elusive due to the large number of ligands/receptors, the diversity of signaling cascades and the complexity of the nervous system. In this study, through genetic manipulation, we uncover that C. elegans Wnt-2 (CWN-2) is required for synaptic development. The CWN-2 signal is required during both embryonic and postembryonic development, in the nervous system and intestine, for promoting synaptic assembly. Furthermore, we provide genetic evidence for CWN-2 promoting synaptogenesis through the Frizzled receptor (FZD) CFZ-2, the Dishevelled (DVL) DSH-2, the β-catenin SYS-1 and the only T-cell specific transcription factor POP-1/TCF. Importantly, it is the first time to report the requirement of a TCF for presynaptic assembly. These findings expand our understanding of the synaptogenic mechanisms and may provide therapeutic insights into Wnt-related neurological disorders
Electron-hole diffusion lengths \u3e175 μm in solution-grown CH\u3csub\u3e3\u3c/sub\u3eNH\u3csub\u3e3\u3c/sub\u3ePbI\u3csub\u3e3\u3c/sub\u3e single crystals
Long, balanced electron and hole diffusion lengths greater than 100 nanometers in polycrystalline CH3NH3PbI3 are critical for highly efficient perovskite solar cells. We report that the diffusion lengths in CH3NH3PbI3 single crystals grown by a solution-growth method can exceed 175 μm under 1 sun illumination and exceed 3 mm under weak light for both electrons and holes. The internal quantum efficiencies approach 100% in 3 mm-thick single crystal perovskite solar cells under weak light. These long diffusion lengths result from greater carrier mobility, lifetime and dramatically smaller trap densities in the single crystals than polycrystalline thin-films. The long carrier diffusion lengths enabled the use of CH3NH3PbI3 in radiation sensing and energy-harvesting through gammavoltaic effect with an efficiency of 3.9% measured with an intense cesium-137 source
The Coordination and Luminescence of the Eu(III) Complexes with the Polymers (PMMA, PVP)
The rare earth complexes and the polymers can be made into composite nanofibers through electrospinning. The fluorescence intensity of these fiber composites is much higher than that of the rare earth complexes. By changing the mixed proportion of polymethyl methacrylate (PMMA) and complexes, nanofiber materials were prepared. Then, by measuring their fluorescence intensity, it is found that the carbonyl bond of PMMA may have coordinated with the rare earth ions and enhanced the luminescence intensity of them. Then, a series of experiments were designed to study their coordination and luminescence mechanism. The coordination mechanism of the polymers with carbonyl groups and the rare earth complexes was explained by Eu(TFT)3(TPPO), Eu(TFT)3(TPPO)2, Eu(PFP)3(TPPO), Eu(PFP)3(TPPO)2, and polyvinyl pyrrolidone (PVP) dissolved in chloroform solution, where TFT means 2-(2,2,2-trifluoroethyl)-1-tetralone, PFP means 2-(2,2,3,3,3-Pentafluoropro-panoyl)-3,4-dihydronaphthalen-1(2H)-one and TPPO means phosphine oxide. The coordination of PVP and the rare earth complexes in solution was studied, and it was found that the fluorine atoms of the ligand had a significant impact on the aggregation-induced effect of the composites. The electron transitioned in the polymers and the complexes were enhanced greatly by the coordination. The colors of emission light could be adjusted by the coordination of the polymers and the rare earth complexes
- …