269 research outputs found
Semi-autonomous scheme for pushing micro-objects
-In many microassembly applications, it is often
desirable to position and orient polygonal micro-objects lying on
a planar surface. Pushing micro-objects using point contact provides
more flexibility and less complexity compared to pick and
place operation. Due to the fact that in micro-world surface forces
are much more dominant than inertial forces and these forces
are distributed unevenly, pushing through the center of mass of
the micro-object will not yield a pure translational motion. In
order to translate a micro-object, the line of pushing should pass
through the center of friction. In this paper, a semi-autonomous
scheme based on hybrid vision/force feedback is proposed to push
microobjects with human assistance using a custom built telemicromanipulation
setup to achieve pure translational motion.
The pushing operation is divided into two concurrent processes:
In one process human operator who acts as an impedance
controller alters the velocity of the pusher while in contact with
the micro-object through scaled bilateral teleoperation with force
feedback. In the other process, the desired line of pushing for
the micro-object is determined continuously using visual feedback
procedures so that it always passes through the varying center of
friction. Experimental results are demonstrated to prove nanoNewton
range force sensing, scaled bilateral teleoperation with
force feedback and pushing microobjects
Discrete-time sliding mode control of high precision linear drive using frictional model
The paper deals with high precision motion control of linear drive system. The accuracy and behavior of the linear drive system are highly affected by the non-linear frictional component compromising of stiction, viscous and stribeck effect present in the system especially in the vicinity of zero velocity. In order to achieve the high accuracy and motion it is mandatory to drive our system with low velocity resulting in many non linear phenomena like tracking error, limit cycles and undesired stick-slip motion etc. This paper discuss the design and implementation of discrete time sliding mode control along with the implementation of dynamic frictional model in order to estimate and compensate the disturbance arising due to frictional component. Experimental results are presented to illustrate the effectiveness and achievable control performance of the proposed scheme
Force feedback pushing scheme for micromanipulation applications
Pushing micro-objects using point contact provides
more flexibility and less complexity compared to pick
and place operation. Due to the fact that in micro-world
surface forces are much more dominant than inertial forces
and these forces are distributed unevenly, pushing through
the center of mass of the micro-object may not yield a pure
translational motion. In order to translate a micro-object, the
line of pushing should pass through the center of friction. In this
paper, a semi-autonomous scheme based on hybrid vision/force
feedback procedure is proposed to push micro-objects with
human assistance using a custom built tele-micromanipulation
setup to achieve translational motion. In the semi-autonomous
pushing process, velocity controlled pushing with force feedback
is realized along x-axis by the human operator while y-axis
orientation is undertaken automatically using visual feedback.
This way the desired line of pushing for the micro-object
is controlled to pass through the varying center of friction.
Experimental results are shown to prove nano-Newton range
force sensing, scaled bilateral teleoperation with force feedback
and snapshot of pushing operation
Discrete sliding mode control of piezo actuator in nano-scale range
In this paper Discrete Sliding Mode Control (SMC) of Piezo actuator is demonstrated in order to achieve a very high accuracy in Nano-scale with the desired dynamics. In spite of the fast dynamics of the Piezo actuator the problem of chattering is eliminated with the SMC control structure. The Piezo actuator suffers from hysteresis loop which is the inherent property and it gives rise to the dominant non-linearity in the system. The proposed SMC control structure has been proved to deliver chattering free motion along with the compensation of the non linearity present due to hysteresis in the system. To further enhance the accuracy of the closed loop system and to be invariant to changes in the plant parameters a robust disturbance observer is designed on SMC framework by taking into consideration the lumped nominal plant parameters. Experimental results for closed loop position are presented in order to verify the Nano-scale accuracy
Scaled bilateral teleoperation using discrete-time sliding mode controller
In this paper, the design of a discrete-time slidingmode
controller based on Lyapunov theory is presented along
with a robust disturbance observer and is applied to a piezostage
for high-precision motion. A linear model of a piezostage was
used with nominal parameters to compensate the disturbance
acting on the system in order to achieve nanometer accuracy. The
effectiveness of the controller and disturbance observer is validated
in terms of closed-loop position performance for nanometer
references. The control structure has been applied to a scaled
bilateral structure for the custom-built telemicromanipulation
setup. A piezoresistive atomic force microscope cantilever with a
built-in Wheatstone bridge is utilized to achieve the nanonewtonlevel
interaction forces between the piezoresistive probe tip and
the environment. Experimental results are provided for the
nanonewton-range force sensing, and good agreement between
the experimental data and the theoretical estimates has been
demonstrated. Force/position tracking and transparency between
the master and the slave has been clearly demonstrated after
necessary scalin
BIQ2021: A Large-Scale Blind Image Quality Assessment Database
The assessment of the perceptual quality of digital images is becoming
increasingly important as a result of the widespread use of digital multimedia
devices. Smartphones and high-speed internet are just two examples of
technologies that have multiplied the amount of multimedia content available.
Thus, obtaining a representative dataset, which is required for objective
quality assessment training, is a significant challenge. The Blind Image
Quality Assessment Database, BIQ2021, is presented in this article. By
selecting images with naturally occurring distortions and reliable labeling,
the dataset addresses the challenge of obtaining representative images for
no-reference image quality assessment. The dataset consists of three sets of
images: those taken without the intention of using them for image quality
assessment, those taken with intentionally introduced natural distortions, and
those taken from an open-source image-sharing platform. It is attempted to
maintain a diverse collection of images from various devices, containing a
variety of different types of objects and varying degrees of foreground and
background information. To obtain reliable scores, these images are
subjectively scored in a laboratory environment using a single stimulus method.
The database contains information about subjective scoring, human subject
statistics, and the standard deviation of each image. The dataset's Mean
Opinion Scores (MOS) make it useful for assessing visual quality. Additionally,
the proposed database is used to evaluate existing blind image quality
assessment approaches, and the scores are analyzed using Pearson and Spearman's
correlation coefficients. The image database and MOS are freely available for
use and benchmarking
The Reliability of Eyewitness Testimony
As perhaps the single most effective method of proving the elements of a crime, eyewitness testimony has been vital to the trial process for centuries. However, the reliability of eyewitness testimony has recently come into question with the work of organizations such as The Innocence Project, which works to exonerate the wrongfully convicted. This thesis examines previous experiments concerning eyewitness testimony as well as court cases in which eyewitnesses provided vital evidence in order to determine the reliability of eyewitness testimony as well as to determine mitigating or exacerbating factors contributing to a lack of reliability
Function based control for bilateral systems in tele-micromanipulation
Design of a motion control system should take into
account (a) unconstrained motion performed without interaction
with environment or any other system, and (b) constrained
motion with system in contact with environment or other systems.
Control in both cases can be formulated in terms of maintaining
desired system configuration what makes essentially the same
structure for common tasks: trajectory tracking, interaction force
control, compliance control etc. The same design approach can be
used to formulate control in bilateral systems aimed to maintain
desired functional relations between human and environment
through master and slave motion systems. Implementation of
the methodology is currently being pursued with a custom built
Tele-micromanipulation setup and preliminary results concerning
force/position tracking and transparency between master and
slave are clearly demonstrated
Development of a micromanipulation system with force sensing
This article provides in-depth knowledge about our undergoing effort to develop an open architecture micromanipulation system with force sensing capabilities. The major requirement to perform any micromanipulation task effectively is to ensure the controlled motion of actuators within nanometer accuracy with low overshoot even under the influence of disturbances. Moreover, to achieve high dexterity in manipulation, control of the interaction forces is required. In micromanipulation, control of interaction forces necessitates force sensing in milli-Newton range with nano-Newton resolution. In this paper, we present a position controller based on a discrete time sliding mode control architecture along with a disturbance observer. Experimental verifications for this controller are demonstrated for 100, 50 and 10 nanometer step inputs applied to PZT stages. Our results indicate that position tracking accuracies up to 10 nanometers, without any overshoot and low steady state error are achievable. Furthermore, the paper includes experimental verification of force sensing within nano-Newton resolution using a piezoresistive cantilever endeffector. Experimental results are compared to the theoretical estimates of the change in attractive forces as a function of decreasing distance and of the pull off force between a silicon tip and a glass surface, respectively. Good agreement among the experimental data and the theoretical estimates has been demonstrated
- …