A biomechanical assessment of modular and monoblock revision hip implants using FE analysis and strain gage measurements

<p>Abstract</p> <p>Background</p> <p>The bone loss associated with revision surgery or pathology has been the impetus for developing modular revision total hip prostheses. Few studies have assessed these modular implants quantitatively from a mechanical standpoint.</p> <p>Methods</p> <p>Three-dimensional finite element (FE) models were developed to mimic a hip implant alone (Construct A) and a hip implant-femur configuration (Construct B). Bonded contact was assumed for all interfaces to simulate long-term bony ongrowth and stability. The hip implants modeled were a Modular stem having two interlocking parts (Zimmer Modular Revision Hip System, Zimmer, Warsaw, IN, USA) and a Monoblock stem made from a single piece of material (Stryker Restoration HA Hip System, Stryker, Mahwah, NJ, USA). Axial loads of 700 and 2000 N were applied to Construct A and 2000 N to Construct B models. Stiffness, strain, and stress were computed. Mechanical tests using axial loads were used for Construct A to validate the FE model. Strain gages were placed along the medial and lateral side of the hip implants at 8 locations to measure axial strain distribution.</p> <p>Results</p> <p>There was approximately a 3% average difference between FE and experimental strains for Construct A at all locations for the Modular implant and in the proximal region for the Monoblock implant. FE results for Construct B showed that both implants carried the majority (Modular, 76%; Monoblock, 66%) of the 2000 N load relative to the femur. FE analysis and experiments demonstrated that the Modular implant was 3 to 4.5 times mechanically stiffer than the Monoblock due primarily to geometric differences.</p> <p>Conclusions</p> <p>This study provides mechanical characteristics of revision hip implants at sub-clinical axial loads as an initial predictor of potential failure.</p

Crossed fused renal ectopia: a report of twelve cases at a tertiary health centre and literature review

Crossed fused renal ectopia (CFRE), second most common renal fusion anomaly of the kidney. These patients were mostly asymptomatic and present with complaints due to associated conditions. The management of these conditions was complicated not only by the approach to be picked, but also by the investigation to be performed. The following study was done at a tertiary care centre, with the duration of this study being from January 2019 to April 2021. A total of twelve patients with CFRE required surgical intervention for their symptoms during this period. As a routine history, routine investigations and ultrasound (US) of the abdomen and pelvis was followed for all the patients. Other imaging modalities were opted on case to case basis. Out of n=12 patients of CFRE with fusion who underwent surgical intervention, majority were male patients (n=10). The most common symptom was abdominal pain (n=9). The most common crossed renal ectopia was the left to right fusion (n=7), as compared to right to left CRE (n=5). The most common fusion anomaly was L-shaped (n=8). The endourological procedures (n=6), laparoscopic procedures (n=2) while open procedures (n=4). It is important for a urologist to bear in mind the various presentations of this less known anomaly with diverse presentations. We have highlighted the investigations used at our center which would help plan further treatment and surgical approach in such patient in view of complex renal as well as vascular anatomy.  

Soil Moisture Measuring Techniques and Factors Affecting the Moisture Dynamics: A Comprehensive Review

The amount of surface soil moisture (SSM) is a crucial ecohydrological natural resource that regulates important land surface processes. It affects critical land–atmospheric phenomena, including the division of energy and water (infiltration, runoff, and evaporation), that impacts the effectiveness of agricultural output (sensible and latent heat fluxes and surface air temperature). Despite its significance, there are several difficulties in making precise measurements, monitoring, and interpreting SSM at high spatial and temporal resolutions. The current study critically reviews the methods and procedures for calculating SSM and the variables influencing measurement accuracy and applicability under different fields, climates, and operational conditions. For laboratory and field measurements, this study divides SSM estimate strategies into (i) direct and (ii) indirect procedures. The accuracy and applicability of a technique depends on the environment and the resources at hand. Comparative research is geographically restricted, although precise and economical—direct measuring techniques like the gravimetric method are time-consuming and destructive. In contrast, indirect methods are more expensive and do not produce measurements at the spatial scale but produce precise data on a temporal scale. While measuring SSM across more significant regions, ground-penetrating radar and remote sensing methods are susceptible to errors caused by overlapping data and atmospheric factors. On the other hand, soft computing techniques like machine/deep learning are quite handy for estimating SSM without any technical or laborious procedures. We determine that factors, e.g., topography, soil type, vegetation, climate change, groundwater level, depth of soil, etc., primarily influence the SSM measurements. Different techniques have been put into practice for various practical situations, although comparisons between them are not available frequently in publications. Each method offers a unique set of potential advantages and disadvantages. The most accurate way of identifying the best soil moisture technique is the value selection method (VSM). The neutron probe is preferable to the FDR or TDR sensor for measuring soil moisture. Remote sensing techniques have filled the need for large-scale, highly spatiotemporal soil moisture monitoring. Through self-learning capabilities in data-scarce areas, machine/deep learning approaches facilitate soil moisture measurement and prediction

Brain health measurement: a scoping review

Objectives Preservation of brain health is an urgent priority for the world’s ageing population. The evidence base for brain health optimisation strategies is rapidly expanding, but clear recommendations have been limited by heterogeneity in measurement of brain health outcomes. We performed a scoping review to systematically evaluate brain health measurement in the scientific literature to date, informing development of a core outcome set. Design Scoping review. Data sources Medline, APA PsycArticles and Embase were searched through until 25 January 2023. Eligibility criteria for selecting studies Studies were included if they described brain health evaluation methods in sufficient detail in human adults and were in English language. Data extraction and synthesis Two reviewers independently screened titles, abstracts and full texts for inclusion and extracted data using Covidence software. Results From 6987 articles identified by the search, 727 studies met inclusion criteria. Study publication increased by 22 times in the last decade. Cohort study was the most common study design (n=609, 84%). 479 unique methods of measuring brain health were identified, comprising imaging, cognitive, mental health, biological and clinical categories. Seven of the top 10 most frequently used brain health measurement methods were imaging based, including structural imaging of grey matter and hippocampal volumes and white matter hyperintensities. Cognitive tests such as the trail making test accounted for 286 (59.7%) of all brain health measurement methods. Conclusions The scientific literature surrounding brain health has increased exponentially, yet measurement methods are highly heterogeneous across studies which may explain the lack of clinical translation. Future studies should aim to develop a selected group of measures that should be included in all brain health studies to aid interstudy comparison (core outcome set), and broaden from the current focus on neuroimaging outcomes to include a range of outcomes

Biomechanical analysis using FEA and experiments of metal plate and bone strut repair of a femur midshaft segmental defect

© 2018 Jason Coquim et al. This investigation assessed the biomechanical performance of the metal plate and bone strut technique for fixing recalcitrant nonunions of femur midshaft segmental defects, which has not been systematically done before. A finite element (FE) model was developed and then validated by experiments with the femur in 15 deg of adduction at a subclinical hip force of 1 kN. Then, FE analysis was done with the femur in 15 deg of adduction at a hip force of 3 kN representing about 4 x body weight for a 75 kg person to examine clinically relevant cases, such as an intact femur plus 8 different combinations of a lateral metal plate of fixed length, a medial bone strut of varying length, and varying numbers and locations of screws to secure the plate and strut around a midshaft defect. Using the traditional “high stiffness” femur-implant construct criterion, the repair technique using both a lateral plate and a medial strut fixed with the maximum possible number of screws would be the most desirable since it had the highest stiffness (1948 N/mm); moreover, this produced a peak femur cortical Von Mises stress (92 MPa) which was below the ultimate tensile strength of cortical bone. Conversely, using the more modern “low stiffness” femur-implant construct criterion, the repair technique using only a lateral plate but no medial strut provided the lowest stiffness (606 N/mm), which could potentially permit more in-line interfragmentary motion (i.e., perpendicular to the fracture gap, but in the direction of the femur shaft long axis) to enhance callus formation for secondary-type fracture healing; however, this also generated a peak femur cortical Von Mises stress (171 MPa) which was above the ultimate tensile strength of cortical bone

Primary Posterior Sagittal Anorectoplasty in male neonates with Anorectal Malformations: A tertiary care hospital experience

Background: The conventional surgical management for a male neonate with intermediate Anorectal Malformation (ARM) involves three stages – the creation of a diversion stoma in the neonatal period, a definitive pull-through procedure/ Posterior Sagittal Anorectoplasty (PSARP) followed by stoma closure. With this background, we present our experience with Single-stage primary definitive repair in selected male neonates with ARM. Methods: Medical records of male ARM cases managed from 2016 to 2018 were reviewed. Male neonates who underwent primary PSARP were analysed retrospectively. Results: A total of 35 records were found, out of which 12 male neonates underwent primary PSARP. The      median gestational age and birth weight were 36.7 weeks and 2.75 kg respectively. Fistula with urinary tract was documented in all. The mean operative time was      65 minutes +/- 15 minutes. Two neonates had minor superficial surgical site infection at neo-anus. Anal dilatations were started after 2 weeks. At follow-up period of 3 years, 11 patients were continent; one patient had constipation with pseudo-incontinence which was successfully being managed by bowel management programme. Conclusions: A primary definitive procedure is feasible when performed on carefully selected male neonates with ARM and also avoids the morbidity of stoma and multiple surgeries and follow-up visits to hospitals

Association of common genetic variants with lipid traits in the Indian population.

Genome-wide association studies (GWAS) have been instrumental in identifying novel genetic variants associated with altered plasma lipid levels. However, these quantitative trait loci have not been tested in the Indian population, where there is a poorly understood and growing burden of cardiometabolic disorders. We present the association of six single nucleotide polymorphisms in 1671 sib pairs (3342 subjects) with four lipid traits: total cholesterol, triglycerides, high density lipoprotein cholesterol (HDL-C) and low density lipoprotein cholesterol (LDL-C). We also investigated the interaction effects of gender, location, fat intake and physical activity. Each copy of the risk allele of rs964184 at APOA1 was associated with 1.06 mmol/l increase in triglycerides (SE = 0.049; p = 0.006), rs3764261 at CETP with 1.02 mmol/l increase in both total cholesterol (SE = 0.042; p = 0.017) and HDL-C (SE = 0.041; p = 0.008), rs646776 at CELSR2-PSRC1-SORT1 with 0.96 mmol/l decrease in cholesterol (SE = 0.043; p = 0.0003) and 0.15 mmol/l decrease in LDL-C levels (SE = 0.043; p = 0.0003) and rs2954029 at TRIB1 with 1.02 mmol/l increase in HDL-C (SE = 0.039; p = 0.047). A combined risk score of APOA1 and CETP loci predicted an increase of 1.25 mmol/l in HDL-C level (SE = 0.312; p = 0.0007). Urban location and sex had strong interaction effects on the genetic association of most of the studied loci with lipid traits. To conclude, we validated four genetic variants (identified by GWAS in western populations) associated with lipid traits in the Indian population. The interaction effects found here may explain the sex-specific differences in lipid levels and their heritability. Urbanization appears to influence the nature of the association with GWAS lipid loci in this population. However, these findings will require replication in other Indian populations

Toronto HCC Risk Index::A validated scoring system to predict 10-year risk of HCC in patients with cirrhosis

Background: Current guidelines recommend biannual surveillance for hepatocellular carcinoma (HCC) in all patients with cirrhosis, regardless of etiology. However, HCC incidence is not well established for many causes of cirrhosis. Aim: To assess the disease-specific incidence of HCC in a large cohort of patients with cirrhosis and to develop a scoring system to predict HCC risk. Methods: A derivation cohort of patients with cirrhosis diagnosed by biopsy or non-invasive measures was identified through retrospective chart review. The disease-specific incidence of HCC was calculated according to etiology of cirrhosis. Factors associated with HCC were identified through multivariable Cox regression and used to develop a scoring system to predict HCC risk. The scoring system evaluated in an external cohort for validation. Results: Of 2,079 patients with cirrhosis and ≥6 months follow-up, 226 (10.8%) developed HCC. The 10-year cumulative incidence of HCC varied by etiologic category from 22% in patients with viral hepatitis, to 16% in those with steatohepatitis and 5% in those with autoimmune liver disease (p&lt;0.001). By multivariable Cox regression, age, sex, etiology and platelets were associated with HCC. Points were assigned in proportion to each hazard ratio to create the Toronto HCC Risk Index (THRI). The 10-year cumulative HCC incidence was 3%, 10% and 32% in the low (&lt;120 points) medium (120-240) and high (&gt;240) risk groups respectively, values that remained consistent after internal validation. External validation was performed on a cohort of patients with PBC, HBV and HCV cirrhosis (n= 1,144) with similar predictive ability (Harrell’s c-statistic 0.77) in the validation and derivation cohorts. Conclusion: HCC incidence varies markedly by etiology of cirrhosis. The THRI, using readily available clinical and laboratory parameters, has good predictive ability for HCC in patients with cirrhosis, and has been validated in an external cohort. This risk score may help to guide recommendations regarding HCC surveillance among patients with cirrhosis

Landscapes of Urbanization and De-Urbanization: A Large-Scale Approach to Investigating the Indus Civilization's Settlement Distributions in Northwest India.

Survey data play a fundamental role in studies of social complexity. Integrating the results from multiple projects into large-scale analyses encourages the reconsideration of existing interpretations. This approach is essential to understanding changes in the Indus Civilization's settlement distributions (ca. 2600-1600 b.c.), which shift from numerous small-scale settlements and a small number of larger urban centers to a de-nucleated pattern of settlement. This paper examines the interpretation that northwest India's settlement density increased as Indus cities declined by developing an integrated site location database and using this pilot database to conduct large-scale geographical information systems (GIS) analyses. It finds that settlement density in northwestern India may have increased in particular areas after ca. 1900 b.c., and that the resulting landscape of de-urbanization may have emerged at the expense of other processes. Investigating the Indus Civilization's landscapes has the potential to reveal broader dynamics of social complexity across extensive and varied environments.ER

Acute kidney injury in patients treated with immune checkpoint inhibitors

Background: Immune checkpoint inhibitor-associated acute kidney injury (ICPi-AKI) has emerged as an important toxicity among patients with cancer. Methods: We collected data on 429 patients with ICPi-AKI and 429 control patients who received ICPis contemporaneously but who did not develop ICPi-AKI from 30 sites in 10 countries. Multivariable logistic regression was used to identify predictors of ICPi-AKI and its recovery. A multivariable Cox model was used to estimate the effect of ICPi rechallenge versus no rechallenge on survival following ICPi-AKI. Results: ICPi-AKI occurred at a median of 16 weeks (IQR 8-32) following ICPi initiation. Lower baseline estimated glomerular filtration rate, proton pump inhibitor (PPI) use, and extrarenal immune-related adverse events (irAEs) were each associated with a higher risk of ICPi-AKI. Acute tubulointerstitial nephritis was the most common lesion on kidney biopsy (125/151 biopsied patients [82.7%]). Renal recovery occurred in 276 patients (64.3%) at a median of 7 weeks (IQR 3-10) following ICPi-AKI. Treatment with corticosteroids within 14 days following ICPi-AKI diagnosis was associated with higher odds of renal recovery (adjusted OR 2.64; 95% CI 1.58 to 4.41). Among patients treated with corticosteroids, early initiation of corticosteroids (within 3 days of ICPi-AKI) was associated with a higher odds of renal recovery compared with later initiation (more than 3 days following ICPi-AKI) (adjusted OR 2.09; 95% CI 1.16 to 3.79). Of 121 patients rechallenged, 20 (16.5%) developed recurrent ICPi-AKI. There was no difference in survival among patients rechallenged versus those not rechallenged following ICPi-AKI. Conclusions: Patients who developed ICPi-AKI were more likely to have impaired renal function at baseline, use a PPI, and have extrarenal irAEs. Two-thirds of patients had renal recovery following ICPi-AKI. Treatment with corticosteroids was associated with improved renal recovery