Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs

Recirculating energy recovery linacs are a promising technology for being able to deliver high power particle beams (~GW) while only requiring low power (~kW) RF sources. This is achieved by decelerating the used bunches and using the energy they deposit in the accelerating structures to accelerate new bunches. We present studies of the impact of the bunch train filling pattern on the performance of the accelerating RF system. We perform RF beam loading simulations under various noise levels and beam loading phases with different linac topologies. We also present a mathematical description of the RF system during the beam loading, which can identify optimal beam filling patterns under different conditions. The results of these studies have major implications for design constraints for future energy recovery linacs, by providing a quantitative metric for different machine designs and topologies

Filling Pattern Dependence of Regenerative Beam Breakup Instability in Energy Recovery Linacs

Beam breakup instability is a potential issue for all particle accelerators and is often the limiting factor for the maximum beam current that can be achieved. This is particularly relevant for Energy Recovery Linacs with multiple passes where a relatively small amount of charge can result in a large beam current. Recent studies have shown that the choice of filling pattern and recirculation scheme for a multi-pass energy recovery linac can drastically affect the interactions between the beam and RF system. In this paper, we further explore this topic to study how filling patterns affect the beam breakup instability and how this can allow us to optimise the design in order to minimise this effect. We present a theoretical model of the beam-RF interaction as well as numerical modeling and show that the threshold current can vary by factors of 5, and potentially, even more, depending on the machine design parameters. Therefore a judicious choice of filling pattern can greatly increase the onset of BBU, expanding the utility of future ERLs

Ex Vivo Liver Resection and Autotransplantation as Surgical Option for Zone II–III Leiomyosarcoma of IVC: A Case Report and Literature Review

We report the first documented case of leiomyosarcoma at zone II-III of inferior vena cava with thrombi in three hepatic veins undergoing ex vivo liver resection and autotransplantation (ELRA) and hepatic veins thrombectomy. A 33-year-old female patient presented with abdominal distention and lower extremities edema. Abdominal wall varicosis and shifting dullness were positive on physical examination. Her liver function was classified as Child-Pugh B and a solid tumor at retro-hepatic vena cava extending to right atrium with thrombi in three hepatic veins were confirmed. The diagnosis of leiomyosarcoma with Budd-Chiari syndrome was highly suspected with preoperative ultrasound, echocardiogram, CT scan, and three-dimensional reconstruction. A zone II-III leiomyosarcoma of IVC origin was confirmed at surgery and ex vivo liver resection and autotransplantation, and hepatic vein thrombectomy with atrial reconstruction were performed under cardiopulmonary bypass (CPB). Operative time, anhepatic time, and CPB time were 12 h, 128 min, and 84 min, respectively. The patients experienced post-operative liver dysfunction and was cured with conservative therapy. Hepatic recurrence two years after surgery was managed with radiofrequency. The patient was alive with liver metastasis three years after surgery. Despite being regarded as an extremely aggressive procedure, ELRA could be considered in the treatment of advanced leiomyosarcoma with Budd-Chiari syndrome and hepatic vein thrombi

Multiobjective optimization and Pareto front visualization techniques applied to normal conducting rf accelerating structures

There has been a renewed interest in applying multiobjective (MO) optimization methods to a number of problems in the physical sciences, including to rf structure design. The results of these optimizations generate large datasets, which makes visualizing the data and selecting individual solutions difficult. Using the generated results, Pareto fronts can be found giving the trade-off between different objectives, allowing one to utilize this key information in design decisions. Although various visualization techniques exist, it can be difficult to know which technique is appropriate and how to apply them successfully to the problem at hand. First, we present the setup and execution of MO optimizations of one standing wave and one traveling wave accelerating cavity, including constraint handling and an algorithm comparison. In order to understand the generated Pareto frontiers, we discuss several visualization techniques, applying them to the problem, and give the benefits and drawbacks of each. We found that the best techniques involve clustering the resulting data first to narrow down the possible choices and then using multidimensional visualization methods such as parallel coordinate plots and decision maps to view the clustered results and select individual solutions. Finally, we give some examples of the application of these methods and the cavities selected based on arbitrary design requirements

A Co- and Ni-Free P2/O3 Biphasic Lithium Stabilized Layered Oxide for Sodium-Ion Batteries and its Cycling Behavior

Cobalt‐ and nickel‐free cathode materials are desirable for developing low‐cost sodium‐ion batteries (SIBs). Compared to the single P‐type and O‐type structures, biphasic P/O structures become a topic of interest thanks to improved performance. However, the added complexity complicates the understanding of the storage mechanism and the phase behavior is still unclear, especially over consecutive cycling. Here, the properties of biphasic P2(34%)/O3(60%) Na0.8Li0.2Fe0.2Mn0.6O2 and its behavior at different states of charge/discharge are reported on. The material is composed of single phase O3 and P2/O3 biphasic particles. Sodium occupies the alkali layers, whereas lithium predominantly (95%) is located in the transition metal layer. An initial reversible capacity of 174 mAh g‐1 is delivered with a retention of 82% dominated by Fe3+/Fe4+ along with contributions from oxygen and partial Mn3+/4+ redox. Cycling leads to complex phase transitions and ion migration. The biphasic nature is nevertheless preserved, with lithium acting as the structure stabilizer.Peer Reviewe

Pushing the Capture Limit of Thermionic Gun Linacs

Although accelerator technology has matured sufficiently, state-of-the-art X-ray linacs for radiotherapy and cargo-scanning capture merely 30-50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving uncaptured electrons to cause problems due to back bombardment, shortening of cathode life, etc. Any solution to increase capture should be effective, simple, reliable, compact, and low cost in order to be adopted by industry. To address this, we present the design of a 6 MeV high capture efficiency S-band electron linac that captures 90% of the initial DC beam. This linac does not require any extra parts that would increase the cost as the high efficiency is achieved via a low-field-amplitude in the first bunching cell to decrease the number of backstreaming electrons, to velocity bunch the electron beam, and recapture backstreaming electrons. Under the low field amplitude, any electrons launched at decelerating phases travel backward with low speeds, thus most of them can catch the next RF cycle, and get re-accelerated/recaptured. As the electron speed is low, the cell length is also shorter than existing linacs. Such a short field is achieved by the use of asymmetric cells with differential coupling to the side-coupled cells. Our novel design has implications for all commercial high current thermionic gun linacs for increasing beam current and increasing cathode lifetime

Improved Low Temperature Performance of Graphite/Li Cells Using Isoxazole as a Novel Cosolvent in Electrolytes

An investigation of novel electrolyte formulations to improve low temperature performance of Li/graphite half cells has been conducted. A novel electrolyte co-solvent, isoxazole (IZ), has been investigated in electrolyte systems composed of lithium difluoro(oxalato)borate (LiDFOB) in fluoroethylene carbonate (FEC) and LiDFOB in ethylene carbonate (EC). Cells containing 1 M LiDFOB FEC: IZ electrolyte have a significant improvement in capacity retention and reversible capacity at -10 C. Ex-situ surface analysis of the cycled electrodes suggests that reduction of LiDFOB results in an oxalate rich solid electrolyte interphase (SEI). Addition of FEC, results in improved stability of the anode SEI preventing further decomposition of isoxazole solvent and improving cycling performance