Prospects for the use of solar energy to accelerate the hardening of concrete in the construction of monolithic structures in Russia

This article addresses the issue of solving the problem of using the solar energy, that allows decreasing of the unit costs, or even avoiding using of the traditional energy resources for performance of the concrete in the southern regions of Russian. Researches that were carried out allow developing more contemporary methods of monolithic construction’s concrete curing. Various types of methods of solar energy using in case to produce precast concrete or reinforced concrete items found vast distribution and implementation in construction industry

Karabo: An Integrated Software Framework Combining Control, Data Management, and Scientific Computing Tasks

The expected very high data rates and volumes at the European XFEL demand an efficient concurrent approach of performing experiments. Data analysis must already start whilst data is still being acquired and initial analysis results must immediately be usable to re-adjust the current experiment setup. We have developed a software framework, called Karabo, which allows such a tight integration of these tasks. Karabo is in essence a pluggable, distributed application management system. All Karabo applications (called “Devices”) have a standardized API for self-description/configuration, program-flow organization (state machine), logging and communication. Central services exist for user management, access control, data logging, configuration management etc. The design provides a very scalable but still maintainable system that at the same time can act as a fully-fledged control or a highly parallel distributed scientific workflow system. It allows simple integration and adaption to changing control requirements and the addition of new scientific analysis algorithms, making them automatically and immediately available to experimentalists

High-resolution electron time-of-flight spectrometers for angle-resolved measurements at the SQS Instrument at the European XFEL

A set of electron time-of-flight spectrometers for high-resolution angle-resolved spectroscopy was developed for the Small Quantum Systems (SQS) instrument at the SASE3 soft X-ray branch of the European XFEL. The resolving power of this spectrometer design is demonstrated to exceed 10 000 (E/ΔE), using the well known Ne 1s−13p resonant Auger spectrum measured at a photon energy of 867.11 eV at a third-generation synchrotron radiation source. At the European XFEL, a width of ∼0.5 eV full width at half-maximum for a kinetic energy of 800 eV was demonstrated. It is expected that this linewidth can be reached over a broad range of kinetic energies. An array of these spectrometers, with different angular orientations, is tailored for the Atomic-like Quantum Systems endstation for high-resolution angle-resolved spectroscopy of gaseous samples

Data reduction activities at European XFEL: early results

The European XFEL is a megahertz repetition-rate facility producing extremely bright and coherent pulses of a few tens of femtoseconds duration. The amount of data generated in the context of user experiments can exceed hundreds of gigabits per second, resulting in tens of petabytes stored every year. These rates and volumes pose significant challenges both for facilities and users thereof. In fact, if unaddressed, extraction and interpretation of scientific content will be hindered, and investment and operational costs will quickly become unsustainable. In this article, we outline challenges and solutions in data reduction

MHz data collection of a microcrystalline mixture of different jack bean proteins

Design Type(s)protocol testing objectiveMeasurement Type(s)protein structure dataTechnology Type(s)x ray crystallographyFactor Type(s)Sample Characteristic(s)Canavalia Machine-accessible metadata file describing the reported data (ISA-Tab format

Megahertz data collection from protein microcrystals at an X-ray free-electron laser

The European X-ray free-electron laser (EuXFEL) in Hamburg is the first megahertz (MHz) repetition rate XFEL. Here the authors use lysozyme crystals and microcrystals from jack bean proteins and demonstrate that damage-free high quality data can be collected at a MHz repetition rate

The Large Scale European XFEL Control System: Overview and Status of the Commissioning

The European XFEL is a 3.4 km long X-ray Free Electron Laser in the final construction and commissioning phase in Hamburg. It will produce 27000 bunches per second at 17.5 GeV. Early 2015 a first electron beam was produced in the RF-photo-injector and the commissioning of consecutive sections will follow during this and next year. The huge number and variety of devices for the accelerator, beam line, experiment,cryogenic and facility systems pose a challenging control task. Multiple systems, including industrial solutions, must be interfaced to each other. The large number of bunches requires a tight time synchronization (down to picoseconds) and high performance data acquisitionsystems. Fast feedbacks from front-ends, the DAQs and online analysis system with a seamless integration of controls are essential for the accelerator and the initially 6 experimental end stations. It turns out that the European XFEL will be the first installation exceeding 2500 FPGAcomponents in the MicroTCA form factor and will run one of the largest PROFIBUS networks. Many subsystem prototypes are already successfully in operation. An overview and status of the XFEL control system will be given

The Large Scale European XFEL Control System: Overview and Status of the Commissioning

The European XFEL is a 3.4 km long X-ray Free Electron Laser in the final construction and commissioning phase in Hamburg. It will produce 27000 bunches per second at 17.5 GeV. Early 2015 a first electron beam was produced in the RF-photo-injector and the commissioning of consecutive sections will follow during this and next year. The huge number and variety of devices for the accelerator, beam line, experiment, cryogenic and facility systems pose a challenging control task. Multiple systems, including industrial solutions, must be interfaced to each other. The large number of bunches requires a tight time synchronization (down to picoseconds) and high performance data acquisition systems. Fast feedbacks from front-ends, the DAQs and online analysis system with a seamless integration of controls are essential for the accelerator and the initially 6 experimental end stations. It turns out that the European XFEL will be the first installation exceeding 2500 FPGA components in the MicroTCA form factor and will run one of the largest PROFIBUS networks. Many subsystem prototypes are already successfully in operation. An overview and status of the XFEL control system will begiven

The Large Scale European XFEL Control System: Overview and Status of the Commissioning

The European XFEL is a 3.4km long X-ray Free Electron Laser in the final construction and commissioning phase in Hamburg. It will produce 27000 bunches per second at 17.5GeV. Early 2015 a first electron beam was produced in the RF-photo-injector and the commissioning of consecutive sections is following during this and next year. The huge number and variety of devices for the accelerator, beam line, experiment, cryogenic and facility systems pose a challenging control task. Multiple systems, including industrial solutions, must be interfaced to each other. The high number of bunches requires a tight time synchronization (down to picoseconds) and high performance data acquisition systems. Fast feedbacks from front-ends, the DAQs and online analysis system with a seamless integration of controls are essential for the accelerator and the initially 6 experimental end stations. It turns out that the European XFEL will be the first installation exceeding 2500 FPGA components in the MicroTCA form factor and will run one of the largest PROFIBUS networks. Many subsystem prototypes are already successfully in operation. An overview and status of the XFEL control system will be given