33 research outputs found
Removal of Pb and Cu ions from aqueous solution by Mn3O4-coated activated carbon
Mn3O4-coated activated carbon (Mn3O4/AC) was prepared by supercritical technique and applied for the removal of Pb and Cu ions from aqueous solution. Kinetic and isotherm data of the adsorption by Mn3O4/AC were compared with those of activated carbon (AC) and pure Mn3O4. Adsorption of metals was adequately described by pseudo-second-order kinetics and Langmuir isotherm models. Maximum adsorption capacities of Pb and Cu ions determined by Langmuir model were enhanced 2.2 and 6.1 times for Pb and Cu ions by Mn3O4 coating onto AC, which might be attributed to reduced resistance of intraparticle diffusion and enhanced surface electrostatic interaction and complexation by Mn3O4
Role of Extracellular Polymeric Substances (EPS) in Biofouling of Reverse Osmosis Membranes
Adsorption of Lead and Nickel on to Expanded Graphite Decorated with Manganese Oxide Nanoparticles
In this study, expanded graphite (EG) was decorated with manganese oxide nanoparticles (MONPs) by the hydrothermal method, and the newly formed composite (MONPs-EG) was applied as adsorbent for the removal of heavy metals from aqueous solutions. The comparative and competitive adsorption of Pb2+ and Ni2+ (0.01–1.00 mM) on MONPs-EG was investigated. Data from isothermal adsorption of single and binary systems suggested that both Pb2+ and Ni2+ were well described by the Langmuir isotherm, and the maximum adsorption capacities at 298 K were calculated at 0.278 and 0.113 mmol/g for Pb2+ and Ni2+, respectively. In binary systems, a dramatic decrease in adsorption capacity of Ni2+ was observed, while the adsorption capacity of Pb2+ was almost stable, indicating the favorable adsorption of Pb2+ over Ni2+ onto the prepared adsorbent. Kinetics studies of single and binary systems showed that a pseudo-second order model could explain the adsorption processes well. Thermodynamic analysis results demonstrated that the adsorption of these metal ions on the prepared adsorbent is spontaneous and exothermic in nature. The adsorption capacity of MONPs-EG increased significantly in the presence of humic acids. Overall, the results of this study suggest that MONPs-EG can be used effectively as an adsorbent for heavy metals removal from aqueous solutions
Stimulation of Biomethane Productivity in Anaerobic Digestion Using Electro-Conductive Carbon-Nanotube Hollow-Fiber Media
The production of biogas was promoted via direct interspecies electron transfer (DIET) by employing electro-conductive carbon-nanotube hollow-fiber media (CHM) in anaerobic digestion. Experimental results showed a positive effect of CHM presence on CH4 productivity with 34% higher CH4 production rate than that of in the presence of non-electroconductive polymeric hollow fiber media. An increased CH4 production rate was due to the shift in the microbiome with more abundant Pelobacter (10.0%), Geobacter (6.9%), and Methanosaeta (15.7%), which play key roles in promoting CH4 production via syntrophic metabolism associated with DIET. Microscopic morphology analysis, using confocal laser scanning microscopy and scanning electron microscopy, exhibited that several living cells were attached with electro-conductive pili on the CHM surface, thereby facilitated electron transport between microbial cells
Electrocatalytic CO2 Reduction via a Permeable CNT Hollow-Fiber Electrode Incorporated with SnO2 Nanoparticles
Herein, we introduce a permeable carbon nanotube hollow-fiber electrode incorporated with SnO2nanoparticles (SnO2-CHE) and propose a new type of gas-phase operational mode. Highly efficient electrochemical syngas production from CO2is made possible by switching the operating mode from liquid phase to gas phase. The operation of SnO2-CHE in the conventional liquid-phase mode yielded a H2/CO ratio higher than 4.59, and the maximum jCOwas only 2.16 mA/cm2 at-0.88 V (vs RHE) due to the low solubility and limited mass transfer of CO2in liquid electrolytes. On the other hand, SnO2-CHE operated under the newly designed gas-phase mode achieved a H2/CO ratio ranging from 1.22 to 4.11 with a maximum jCOof 7.42 mA/cm2 at-0.76 V (vs RHE), which is proper for direct post-conversion processes. Therefore, this work could offer a new avenue for electrochemical syngas production using a nonprecious metal-based hollow-fiber type electrode, which allows for a large electrode surface area and high CO2availability in gas-phase operation
Impact of an extracellular polymeric substance (EPS) precoating on the initial adhesion of Burkholderia cepacia and Pseudomonas aeruginosa
Extracellular polymeric substances (EPS) significantly influence bacterial adhesion to solid surfaces, but it is difficult to elucidate the role of EPS on bacterial adhesion due to their complexity and variability. In the present study, the effect of EPS on the initial adhesion of B. cepaciaepacia PC184 and P. aeruginosa PAO1 on glass slides with and without an EPS precoating was investigated under three ionic strength conditions. The surface roughness of EPS coated slides was evaluated by atomic force microscopy (AFM), and its effect on initial bacterial adhesion was found to be trivial. X-ray photoelectron spectroscopy (XPS) studies were performed to determine the elemental surface compositions of bacterial cells and substrata. The results showed that an EPS precoating hindered bacterial adhesion on solid surfaces, which was largely attributed to the presence of proteins in the EPS. This observation can be attributed to the increased steric repulsion at high ionic strength conditions. A steric model for polymer brushes that considers the combined influence of steric effects and DLVO interaction forces is shown to adequately describe bacterial adhesion behaviors.</p
The role of conditioning film formation in Pseudomonas aeruginosa PAO1 adhesion to inert surfaces in aquatic environments
Bacterial initial adhesion to inert surfaces in aquatic environments is highly dependent on the surface properties of the substratum, which can be altered significantly by the formation of conditioning films. In this study, the impact of conditioning films formed with extracellular polymeric substances (EPS) on bacterial adhesion was investigated. Adhesion of wild type Pseudomonas aeruginosa PAO1 to slides coated with model EPS components (alginate, humic substances, and bovine serum albumin (BSA)) was examined. Surface roughness of conditioning film coated slides was evaluated by atomic force microscopy (AFM), and its effect on the bacterial initial adhesion was not significant. X-ray photoelectron spectroscopy (XPS) studies were performed to determine the elemental surface compositions of bacterial cells and substrates. Results showed that bacterial adhesion to bare slides and slides coated with alginate and humic substances increased as ionic strength increased. Conversely, BSA coating enhanced bacterial adhesion at low ionic strength but hindered adhesion at higher ionic strength. It was concluded that forces other than hydrophobic and electrostatic interactions were involved in controlling bacterial adhesion to BSA coated surfaces. A steric model for polymer brushes that considers the combined influence of steric effects and DLVO interaction forces was shown to adequately describe the observed bacterial adhesion behaviors.</p
Removal of urea in ultrapure water system by urease-coated reverse osmosis membrane
Among the various substances found in the feed source for the production of ultrapure water (UPW), urea is challenging to remove because it is a small molecular weight molecule that is not easily oxidized and does not carry a charge under neutral pH conditions. Urease enzyme, found in various organisms such as plants and bacteria, catalyze the hydrolysis of urea into carbon dioxide and ammonia. In this study, urease was immobilized on the polyamide layer of a reverse osmosis (RO) membrane to remove urea in UPW systems. The removal efficiency of urea by urease-coated RO membrane showed up to 27.9 % higher urea removal efficiency compared to the pristine membrane. This increase in urea removal can be attributed to both physical and biological effects from the urease coating on the membrane. Firstly, urease on the membrane surface can act as an additional physical barrier for urea to pass through. Secondly, urea can be hydrolyzed by the enzyme when it passes through the urease-coated RO membrane. In a two-pass RO system typical for UPW production, the removal of urea by a urease-coated membrane would be enhanced by twofold. This overall method can significantly increase the removal efficiency of urea in UPW systems, especially when considering the compounded removal by the urease coating, rejection by RO, and additional reactions by other treatment processes. Moreover, urea in UPW systems can be removed without the installment of additional processes by simply coating urease on the existing RO membranes
Impact of conditioning films on the initial adhesion of Burkholderia cepacia
Bacterial initial adhesion to inert surfaces in aquatic environments is mainly governed by the surface properties of the substratum, which can be altered significantly by the formation of conditioning films. Bacteria were tested for ability to adhere to bare glass slides and to slides coated with alginate, bovine serum albumin (BSA), or Suwannee River natural organic matter (SR-NOM). Three Burkholderia cepacia strains with different extracellular polymeric substance (EPS) secretion capacities were tested. The surface roughness of the slides was measured by atomic force microscopy (AFM), but its effect on bacterial initial adhesion was not significant. Our results showed the degree (number of cells per cm2) of initial adhesion among the three strains of B. cepacia was not significantly different, indicating that B. cepacia surface EPS did not impact adhesive capacity in the conditions tested. Depending on the conditioning film types and ionic strength conditions, conditioning film coatings can either enhance or reduce bacterial initial adhesion. Bacterial adhesion to bare slides and to alginate or SR-NOM coated slides increased with increasing ionic strength; however, a similar trend was not observed on BSA coated slides. Although BSA coated slides were the most hydrophobic and had the lowest negative surface charge among the surfaces tested, bacterial adhesion was not enhanced by the BSA coating. The extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was applied to explain bacterial adhesion to solid surfaces.</p