Recombinant mussel proximal thread matrix protein promotes osteoblast cell adhesion and proliferation

BACKGROUND: von Willebrand factor (VWF) is a key load bearing domain for mamalian cell adhesion by binding various macromolecular ligands in extracellular matrix such as, collagens, elastin, and glycosaminoglycans. Interestingly, vWF like domains are also commonly found in load bearing systems of marine organisms such as in underwater adhesive of mussel and sea star, and nacre of marine abalone, and play a critical load bearing function. Recently, Proximal Thread Matrix Protein1 (PTMP1) in mussel composed of two vWF type A like domains has characterized and it is known to bind both mussel collagens and mammalian collagens. RESULTS: Here, we cloned and mass produced a recombinant PTMP1 from E. coli system after switching all the minor codons to the major codons of E. coli. Recombinant PTMP1 has an ability to enhance mouse osteoblast cell adhesion, spreading, and cell proliferation. In addition, PTMP1 showed vWF-like properties as promoting collagen expression as well as binding to collagen type I, subsequently enhanced cell viability. Consequently, we found that recombinant PTMP1 acts as a vWF domain by mediating cell adhesion, spreading, proliferation, and formation of actin cytoskeleton. CONCLUSIONS: This study suggests that both mammalian cell adhesion and marine underwater adhesion exploits a strong vWF-collagen interaction for successful wet adhesion. In addition, vWF like domains containing proteins including PTMP1 have a great potential for tissue engineering and the development of biomedical adhesives as a component for extra-cellular matrix

Photocatalytic Activity of Titanate Nanotube Powders in a Hybrid Pollution Control System

The photocatalytic activity on decomposition of Rhodamine B (RB) of titanate nanotubes (TNTs) synthesized by alkali hydrothermal treatment method was evaluated using a microwave/UV/photocatalyst hybrid system. The effects of each element technique as well as the synergy effects on decomposition of organic material were investigated. When TNTs were ion-exchanged with HCl, Na+ content was reduced from 8.36 wt% to 0.03 wt%, whereas the TNTs calcined at 723 K was phase-transformed into anatase structure. The RB decomposition rate increased with TNTs dosage as well as with microwave intensity. Effect of addition of auxiliary oxidants on photocatalytic decomposition of RB was also investigated. When ozone was added, the decomposition rate increased with the amount of ozone added. When H2O2 was used as the auxiliary oxidant, however, addition of H2O2 exceeding a threshold amount caused reduction of decomposition rate. A synergy effect was observed when H2O2 addition was combined with microwave-assisted photocatalysis

Rationale of decreasing low-density lipoprotein cholesterol below 70 mg/dL in patients with coronary artery disease: A retrospective virtual histology-intravascular ultrasound study

Background: The associations between statin and coronary plaque compositional changes were re­ported according to the use of high dose or not. An evaluation of the impact of low-density lipoprotein cholesterol (LDL-C) < 70 mg/dL by using real world dosages of statin on coronary plaque composition was undertaken. Methods: The study subjects consisted of 61 patients (mean 59.9 years old, 45 males) who underwent percutaneous coronary intervention, baseline and follow-up (F/U; mean 8.4 months) virtual histology- -intravascular ultrasound (VH-IVUS) examination. Change of plaque composition at peri-stent area, which was selected in order to measure the identical site at F/U study, was compared according to the F/U LDL-C level. Results: Body mass index, prevalence of dyslipidemia, baseline total cholesterol and baseline LDL-C were significantly lower in F/U LDL-C < 70 mg/dL group (14 segments in 10 patients) than F/U LDL-C ≥ 70 mg/dL group (79 segments in 51 patients). F/U high-density lipoprotein cholesterol (HDL-C, OR 1.06, 95% CI 1.00–1.11, p = 0.054) and F/U LDL-C < 70 mg/dL (OR 3.43, 95% CI 0.97–12.17, p = 0.056) showed strong tendency of regression of necrotic core volume (NCV) ≥ 10%. In multivariable logis­tic regression analysis, F/U HDL-C (OR 1.07, 95% CI 1.01–1.14, p = 0.020) and F/U LDL-C < 70 mg/dL (OR 8.02, 95% CI 1.58–40.68, p = 0.012) were the independent factors for regression of NCV ≥ 10%. Conclusions: Follow-up LDL-C level < 70 mg/dL with any types of statins and increase of HDL-C were associated with regression of NCV ≥ 10% in patients with coronary artery disease

Diagnostic performance of emergency medical technician for ST-segment elevation myocardial infarction

This study was conducted to determine whether level-1 emergency medical technicians (EMTs) can adequately recognize ST-segment elevation myocardial infarction (STEMI) in the emergency department (ED) and whether their ability to do so differs from that of emergency medicine physicians (EMP). From December 2022 to November 2023, patients aged 20 years or older visiting the ED with chief complaints suggesting acute coronary syndrome (ACS) were enrolled. As soon as the patient arrived at the ED, a level-1 EMT conducted a 12-lead electrocardiogram (ECG) to assess STEMI; an EMP subsequently assessed whether to activate the percutaneous coronary intervention team. Demographic characteristics, test results, and final diagnoses were collected from the medical records. Among the 723 patients with case report forms, 720 were included in the analysis. These were categorized as follows: 117 (16.3%) with STEMI, 159 (22.1%) with non-ST-segment elevation ACS, and 444 (61.7%) with other conditions. STEMI was correctly recognized in 100 patients (91.7%) by level-1 EMTs and in 104 patients (95.4%) by EMPs (kappa=0.646). EMTs with less than 1 year of ED work experience correctly recognized 60 out of 67 STEMI patients (89.6%), which was comparable with the EMPs who recognized 65 out of 67 STEMI patients (97.0%, kappa=0.614). EMTs with more than 1 year of ED work correctly recognized 40 out of 42 STEMI patients (95.2%), and therefore performed better than EMPs, who recognized 39 out of 42 STEMI patients (92.9%, kappa=0.727). The level-1 EMTs adequately recognized STEMI using a 12-lead ECG and were in substantial agreement with the evaluations of the EMPs

Theoretical investigations on microwave Fano resonances in 3D-printable hollow dielectric resonators

High-index dielectric structures have recently been studied intensively for Mie resonances at optical frequencies. These dielectric structures can enable extreme light manipulation, similar to that which has been achieved with plasmonic nanostructures. In the microwave region, dielectric resonators and metamaterials can be fabricated directly using 3D printing, which is advantageous for fabricating structurally complicated 3D geometries. It is therefore especially suitable for the fabrication of subwavelength structures. Here we report theoretical investigations on microwave Fano resonances in 3D-printable dielectric materials and structures. In particular, we propose and analyse 3D-printable, hollow, dielectric resonators with relatively low refractive indices, which exhibit sharp Fano resonances. We can control the interaction between bright and dark modes in a coupled dielectric particle pair by adjusting the inner-hole size, and thus we can increase the radiative Q factors further. We also find that Fano resonances in these hollow dielectric resonators are very sensitive to an index change in the surrounding medium, which could be useful for long-distance environmental sensing. New possibilities and opportunities are opening up with the rapid development of 3D-printing technologies. Our findings and the detailed investigations reported here can provide useful guidelines for future photonic devices based on 3D-printable materials and structures

Emergence of robust 2D skyrmions in SrRuO3 ultrathin film without the capping layer

Magnetic skyrmions have fast evolved from a novelty, as a realization of topologically protected structure with particle-like character, into a promising platform for new types of magnetic storage. Significant engineering progress was achieved with the synthesis of compounds hosting room-temperature skyrmions in magnetic heterostructures, with the interfacial Dzyaloshinskii-Moriya interactions (DMI) conducive to the skyrmion formation. Here we report findings of ultrathin skyrmion formation in a few layers of SrRuO3 grown on SrTiO3 substrate without the heavy-metal capping layer. Measurement of the topological Hall effect (THE) reveals a robust stability of skyrmions in this platform, judging from the high value of the critical field 1.57 Tesla (T) at low temperature. THE survives as the field is tilted by as much as 85 degrees at 10 Kelvin, with the in-plane magnetic field reaching up to 6.5 T. Coherent Bragg Rod Analysis, or COBRA for short, on the same film proves the rumpling of the Ru-O plane to be the source of inversion symmetry breaking and DMI. First-principles calculations based on the structure obtained from COBRA find significant magnetic anisotropy in the SrRuO3 film to be the main source of skyrmion robustness. These features promise a few-layer SRO to be an important new platform for skyrmionics, without the necessity of introducing the capping layer to boost the spin-orbit coupling strength artificially.Comment: Supplementary Information available upon reques

Tau functions as Widom constants

We define a tau function for a generic Riemann-Hilbert problem posed on a union of non-intersecting smooth closed curves with jump matrices analytic in their neighborhood. The tau function depends on parameters of the jumps and is expressed as the Fredholm determinant of an integral operator with block integrable kernel constructed in terms of elementary parametrices. Its logarithmic derivatives with respect to parameters are given by contour integrals involving these parametrices and the solution of the Riemann-Hilbert problem. In the case of one circle, the tau function coincides with Widom's determinant arising in the asymptotics of block Toeplitz matrices. Our construction gives the Jimbo-Miwa-Ueno tau function for Riemann-Hilbert problems of isomonodromic origin (Painlev\'e VI, V, III, Garnier system, etc) and the Sato-Segal-Wilson tau function for integrable hierarchies such as Gelfand-Dickey and Drinfeld-Sokolov.Comment: 26 pages, 6 figure

Emergence of robust 2D skyrmions in SrRuO3 ultrathin film without the capping layer

Magnetic skyrmions have fast evolved from a novelty, as a realization of topologically protected structure with particle-like character, into a promising platform for new types of magnetic storage. Significant engineering progress was achieved with the synthesis of compounds hosting room-temperature skyrmions in magnetic heterostructures, with the interfacial Dzyaloshinskii-Moriya interactions (DMI) conducive to the skyrmion formation. Here we report findings of ultrathin skyrmion formation in a few layers of SrRuO3 grown on SrTiO3 substrate without the heavy-metal capping layer. Measurement of the topological Hall effect (THE) reveals a robust stability of skyrmions in this platform, judging from the high value of the critical field 1.57 Tesla (T) at low temperature. THE survives as the field is tilted by as much as 85 degrees at 10 Kelvin, with the in-plane magnetic field reaching up to 6.5 T. Coherent Bragg Rod Analysis, or COBRA for short, on the same film proves the rumpling of the Ru-O plane to be the source of inversion symmetry breaking and DMI. First-principles calculations based on the structure obtained from COBRA find significant magnetic anisotropy in the SrRuO3 film to be the main source of skyrmion robustness. These features promise a few-layer SRO to be an important new platform for skyrmionics, without the necessity of introducing the capping layer to boost the spin-orbit coupling strength artificially.Comment: Supplementary Information available upon reques