Charge-flow structures as polymeric early-warning fire alarm devices

The charge-flow transistor (CFT) and its applications for fire detection and gas sensing were investigated. The utility of various thin film polymers as possible sensing materials was determined. One polymer, PAPA, showed promise as a relative humidity sensor; two others, PFI and PSB, were found to be particularly suitable for fire detection. The behavior of the charge-flow capacitor, which is basically a parallel-plate capacitor with a polymer-filled gap in the metallic tip electrode, was successfully modeled as an RC transmission line. Prototype charge-flow transistors were fabricated and tested. The effective threshold voltage of this metal oxide semiconductor was found to be dependent on whether surface or bulk conduction in the thin film was dominant. Fire tests with a PFI-coated CFT indicate good sensitivity to smouldering fires

Electrostatic curved electrode actuators

This paper presents the design and performance of an electrostatic actuator consisting of a laterally compliant cantilever beam and a fixed curved electrode, both suspended above a ground plane. A theoretical description of the static behavior of the cantilever as it is pulled into contact with the rigid fixed-electrode structure is given. Two models are presented: a simplified semi-analytical model based on energy methods, and fully three-dimensional (3-D) coupled electromechanical numerical simulations using CoSolve-EM. The two models are in qualitative agreement with each other, and predict stable actuator behavior when the beam deflection becomes constrained by the curved electrode geometry before electrostatic pull-in can occur. The pull-in behavior depends on the shape of the curved electrode. Test devices have been fabricated by polysilicon surface micromachining techniques. Experimental results confirm the basic theoretical results. Stable behavior with relatively large displacements and forces can be generated by these curved electrode actuators. Depending on the design, or as a result of geometrical imperfections, regions of unstable (pull-in) deflection behavior are also observe

High intermodulation gain in a micromechanical Duffing resonator

In this work we use a micromechanical resonator to experimentally study small signal amplification near the onset of Duffing bistability. The device consists of a PdAu beam serving as a micromechanical resonator excited by an adjacent gate electrode. A large pump signal drives the resonator near the onset of bistability, enabling amplification of small signals in a narrow bandwidth. To first order, the amplification is inversely proportional to the frequency difference between the pump and signal. We estimate the gain to be about 15dB for our device

Measurement of mesoscopic High-TcT_c superconductors using Si mechanical micro-oscillators

In a superconducting mesoscopic sample, with dimensions comparable to the London penetration depth, some properties are qualitatively different to those found in the bulk material. These properties include magnetization, vortex dynamics and ordering of the vortex lattice. In order to detect the small signals produced by this kind of samples, new instruments designed for the microscale are needed. In this work we use micromechanical oscillators to study the magnetic properties of a Bi$_2$Sr$_2$CaCu$_2$O$_{8 + \delta}$ disk with a diameter of 13.5 microns and a thickness of 2.5 microns. The discussion of our results is based on the existence and contribution of inter and intra layer currents.Comment: 4 pages, 6 figure

Measuring Charge Transport in an Amorphous Semiconductor Using Charge Sensing

We measure charge transport in hydrogenated amorphous silicon (a-Si:H) using a nanometer scale silicon MOSFET as a charge sensor. This charge detection technique makes possible the measurement of extremely large resistances. At high temperatures, where the a-Si:H resistance is not too large, the charge detection measurement agrees with a direct measurement of current. The device geometry allows us to probe both the field effect and dispersive transport in the a-Si:H using charge sensing and to extract the density of states near the Fermi energy.Comment: 4 pages, 4 figure

Mechanical Structural Design of a MEMS-Based Piezoresistive Accelerometer for Head Injuries Monitoring: A Computational Analysis by Increments of the Sensor Mass Moment of Inertia.

This work focuses on the proof-mass mechanical structural design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common; for example, in sports such as racing cars or American Football. The device requires the highest sensitivity achievable with a single proof-mass approach, and a very low error (<1%) as the accuracy for these types of applications is paramount. The optimization method differs from previous work as it is based on the progressive increment of the sensor proof-mass mass moment of inertia (MMI) in all three axes. Three different designs are presented in this study, where at each step of design evolution, the MMI of the sensor proof-mass gradually increases in all axes. The work numerically demonstrates that an increment of MMI determines an increment of device sensitivity with a simultaneous reduction of cross-axis sensitivity in the particular axis under study. This is due to the linkage between the external applied stress and the distribution of mass (of the proof-mass), and therefore of its mass moment of inertia. Progressively concentrating the mass on the axes where the piezoresistors are located (i.e., x- and y-axis) by increasing the MMI in the x- and y-axis, will undoubtedly increase the longitudinal stresses applied in that areas for a given external acceleration, therefore increasing the piezoresistors fractional resistance change and eventually positively affecting the sensor sensitivity. The final device shows a sensitivity increase of about 80% in the z-axis and a reduction of cross-axis sensitivity of 18% respect to state-of-art sensors available in the literature from a previous work of the authors. Sensor design, modelling, and optimization are presented, concluding the work with results, discussion, and conclusion

Measurement of the Casimir force between dissimilar metals

The first precise measurement of the Casimir force between dissimilar metals is reported. The attractive force, between a Cu layer evaporated on a microelectromechanical torsional oscillator, and an Au layer deposited on an Al$_2$O$_3$ sphere, was measured dynamically with a noise level of 6 fN/$\sqrt{\rm{Hz}}$. Measurements were performed for separations in the 0.2-2 $\mu$m range. The results agree to better than 1% in the 0.2-0.5 $\mu$m range with a theoretical model that takes into account the finite conductivity and roughness of the two metals. The observed discrepancies, which are much larger than the experimental precision, can be attributed to a lack of a complete characterization of the optical properties of the specific samples used in the experiment.Comment: 6 pages, 4 figure

A chromatographic analysis of the response of polymeric fire-detection devices to combustion products

Polymer responses to a variety of smouldering sources, including cellulose, acrylic, urethane, polyvinyl chloride, and wool were investigated. A suitable trapping system for combustion products was developed and a charge flow transistor was fabricated to monitor the transverse or sheet resistance of a thin film

On the Spectra of Syntactic Structures

This paper explores the application of spectral graph theory to the problem of characterizing linguistically significant classes of tree structures. As a case study, we focus on three classes of trees, binary, X-bar, and asymmetric c-command extensional, and show that the spectral properties of different matrix representations of these classes of trees provide insight into the properties that characterize these classes. More generally, our goal is to provide another route to understanding the structure of natural language, one that does not come from extensive definitions and rules taken by extrapolating from the syntactic structure, but instead is extracted directly from computation on the syntactically-defined graphical structures