235 research outputs found
The state of the focus and image quality of the Spitzer Space Telescope as measured in orbit
We describe the process by which the NASA Spitzer Space Telescope (SST) Cryogenic Telescope Assembly (CTA) was brought into focus after arrival of the spacecraft in orbit. The ground rules of the mission did not allow us to make a conventional focus sweep. A strategy was developed to determine the focus position through a program of passive imaging during the observatory cool-down time period. A number of analytical diagnostic tools were developed to facilitate evaluation of the state of the CTA focus. Initially, these tools were used to establish the in-orbit focus position. These tools were then used to evaluate the effects of an initial small exploratory move that verified the health and calibration of the secondary mirror focus mechanism. A second large move of the secondary mirror was then commanded to bring the telescope into focus. We present images that show the CTA Point Spread Function (PSF) at different channel wavelengths and demonstrate that the telescope achieved diffraction limited performance at a wavelength of 5.5 μm, somewhat better than the level-one requirement
Upgrade of Belle II Vertex Detector with CMOS Pixel Technology
The Belle II experiment at KEK in Japan considers upgrading its vertex
detector system to address the challenges posed by high background levels
caused by the increased luminosity of the SuperKEKB collider. One proposal for
upgrading the vertex detector aims to install a 5-layer all monolithic pixel
vertex detector based on fully depleted CMOS sensors in 2027. The new system
will use the OBELIX MAPS chips to improve background robustness and reduce
occupancy levels through small and fast pixels. This causes better track
finding, especially for low transverse momenta tracks. This text will focus on
the predecessor of the OBELIX sensor, the TJ-Monopix2, presenting laboratory
and test beam results on pixel response, efficiency, and spatial resolution.Comment: 8 pages, 8 figures, Proceedings for 24th international Workshop on
Radiation Imaging Detectors,25-29 JUNE 20233 Osl
Performance studies of the Belle II Silicon Vertex Detector with data taken at the DESY test beam in April 2016
Belle II is a multipurpose detector currently under construction which will be operated at the next generation B-factory SuberKEKB in Japan. Its main devices for the vertex reconstruction are the Silicon Vertex Detector (SVD) and the Pixel Detector (PXD). In April 2016 a sector of the Belle II SVD and PXD have been tested in a beam of high energetic electrons at the test beam facility at DESY Hamburg (Germany). We report here the results for the hit efficiency estimation and the measurement of the resolution for the Belle II silicon vertex etector. We find that the hit efficiencies are on average above 99.5% and that the measured resolution is within the expectations
Performance studies of the Belle II Silicon Vertex Detector with data taken at the DESY test beam in April 2016
Belle II is a multipurpose detector currently under construction which will be operated at the next generation B-factory SuberKEKB in Japan. Its main devices for the vertex reconstruction are the Silicon Vertex Detector (SVD) and the Pixel Detector (PXD). In April 2016 a sector of the Belle II SVD and PXD have been tested in a beam of high energetic electrons at the test beam facility at DESY Hamburg (Germany). We report here the results for the hit efficiency estimation and the measurement of the resolution for the Belle II silicon vertex etector. We find that the hit efficiencies are on average above 99.5% and that the measured resolution is within the expectations
Measurement of the Branching Fraction of the Decay in Fully Reconstructed Events at Belle
We present an analysis of the exclusive
decay, where represents an
electron or a muon, with the assumption of charge-conjugation symmetry and
lepton universality. The analysis uses the full data sample
collected by the Belle detector, corresponding to 711 fb of integrated
luminosity. We select the events by fully reconstructing one meson in
hadronic decay modes, subsequently determining the properties of the other
meson. We extract the signal yields using a binned maximum-likelihood fit to
the missing-mass squared distribution in bins of the invariant mass of the two
pions or the momentum transfer squared. We measure a total branching fraction
of , where the
uncertainties are statistical and systematic, respectively. This result is the
first reported measurement of this decay.Comment: 23 pages, 19 figure
Binary Willshaw learning yields high synaptic capacity for long-term familiarity memory
We investigate from a computational perspective the efficiency of the
Willshaw synaptic update rule in the context of familiarity discrimination, a
binary-answer, memory-related task that has been linked through psychophysical
experiments with modified neural activity patterns in the prefrontal and
perirhinal cortex regions. Our motivation for recovering this well-known
learning prescription is two-fold: first, the switch-like nature of the induced
synaptic bonds, as there is evidence that biological synaptic transitions might
occur in a discrete stepwise fashion. Second, the possibility that in the
mammalian brain, unused, silent synapses might be pruned in the long-term.
Besides the usual pattern and network capacities, we calculate the synaptic
capacity of the model, a recently proposed measure where only the functional
subset of synapses is taken into account. We find that in terms of network
capacity, Willshaw learning is strongly affected by the pattern coding rates,
which have to be kept fixed and very low at any time to achieve a non-zero
capacity in the large network limit. The information carried per functional
synapse, however, diverges and is comparable to that of the pattern association
case, even for more realistic moderately low activity levels that are a
function of network size.Comment: 20 pages, 4 figure
Belle II Technical Design Report
The Belle detector at the KEKB electron-positron collider has collected
almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an
upgrade of KEKB is under construction, to increase the luminosity by two orders
of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2
/s luminosity. To exploit the increased luminosity, an upgrade of the Belle
detector has been proposed. A new international collaboration Belle-II, is
being formed. The Technical Design Report presents physics motivation, basic
methods of the accelerator upgrade, as well as key improvements of the
detector.Comment: Edited by: Z. Dole\v{z}al and S. Un
Angular analysis of
We present a measurement of angular observables, , , ,
, in the decay , where
is either or . The analysis is performed on
a data sample corresponding to an integrated luminosity of
containing pairs, collected
at the resonance with the Belle detector at the
asymmetric-energy collider KEKB. Four angular observables,
are extracted in five bins of the invariant mass squared of the
lepton system, . We compare our results for with Standard
Model predictions including the region in which the LHCb collaboration
reported the so-called anomaly.Comment: Conference paper for LHC Ski 2016. SM prediction for
corrected and reference for arXiv:1207.2753 adde
- …