Deceleration-Limiting Roadway Barrier

Roadway barrier system and method are disclosed for decelerating a moving vehicle in a controlled manner and for retaining the decelerated vehicle. A net or mesh of the roadway barrier system receives and captures the moving vehicle. The net or mesh is secured to anchors by energy absorbing straps. The energy absorbing straps deploy under a tensional load to decelerate the moving vehicle, the straps providing a controlled resistance to the tensional load over a predefined displacement or stroke to bring the moving vehicle to rest. Additional features include a sacrificial panel or sheet in front of the net that holds up the net or mesh while deflecting vehicles that collide only tangentially with the roadway barrier system

Mass-sheet degeneracy: Fundamental limit on the cluster mass reconstruction from statistical (weak) lensing

Weak gravitational lensing is considered to be one of the most powerful tools to study the mass and the mass distribution of galaxy clusters. However, weak lensing mass reconstructions are plagued by the so-called mass-sheet degeneracy--the surface mass density \kappa of the cluster can be determined only up to a degeneracy transformation \kappa \to \kappa' = \lambda \kappa + (1 -\lambda), where \lambda is an arbitrary constant. This transformation fundamentally limits the accuracy of cluster mass determinations if no further assumptions are made. We describe here a method to break the mass-sheet degeneracy in weak lensing mass maps using distortion and redshift information of background galaxies and illustrate this by two simple toy models. Compared to other techniques proposed in the past, it does not rely on any assumptions on cluster potential; it can be easily applied to non-parametric mass-reconstructions and no assumptions on boundary conditions have to be made. In addition it does not make use of weakly constrained information (such as the source number counts, used in the magnification effect). Our simulations show that we are effectively able to break the mass-sheet degeneracy for supercritical lenses, but that for undercritical lenses the mass-sheet degeneracy is very difficult to be broken, even under idealised conditions.Comment: Accepted for publication in A&

Safer Roadside Crash Walls Would Limit Deceleration

The figure depicts the aspects of a proposed deceleration-limiting design for crash walls at the sides of racetracks and highways. The proposal is intended to overcome the disadvantages of both rigid barriers and kinetic-energy-absorbing barriers of prior design. Rigid barriers can keep high-speed crashing motor vehicles from leaving roadways and thereby prevent injury to nearby persons and objects, but they can also subject the occupants of the vehicles to deceleration levels high enough to cause injury or death. Kinetic-energy-absorbing barriers of prior design reduce deceleration levels somewhat, but are not designed to soften impacts optimally; moreover, some of them allow debris to bounce back onto roadways or onto roadside areas, and, in cases of glancingly incident vehicles, some of them can trap the vehicles in such a manner as to cause more injury than would occur if the vehicles were allowed to skid along the rigid barriers. The proposed crash walls would (1) allow tangentially impacting vehicles to continue sliding along the racetrack without catching them, (2) catch directly impacting vehicles to prevent them from injuring nearby persons and objects, and (3) absorb kinetic energy in a more nearly optimum way to limit decelerations to levels that human occupants could survive

BOSS Ultracool Dwarfs I: Colors and Magnetic Activity of M and L dwarfs

We present the colors and activity of ultracool (M7-L8) dwarfs from the Tenth Data Release of the Sloan Digital Sky Survey (SDSS). We combine previous samples of SDSS M and L dwarfs with new data obtained from the Baryon Oscillation Sky Survey (BOSS) to produce the BOSS Ultracool Dwarf (BUD) sample of 11820 M7-L8 dwarfs. By combining SDSS data with photometry from the Two Micron All Sky Survey and the Wide-Field Infrared Sky Explorer mission, we present ultracool dwarf colors from $i-z$ to $W2-W3$ as a function of spectral type, and extend the SDSS-2MASS-WISE color locus to include ultracool dwarfs. The $i-z$, $i-J$, and $z-J$ colors provide the best indication of spectral type for M7-L3 dwarfs. We also examine ultracool dwarf chromospheric activity through the presence and strength of H$\alpha$ emission. The fraction of active dwarfs rises through the M spectral sequence until it reaches $\sim$90% at spectral type L0. The fraction of active dwarfs then declines to 50% at spectral type L5; no H$\alpha$ emission is observed in the late-L dwarfs in the BUD sample. The fraction of active L0-L5 dwarfs is much higher than previously observed. The strength of activity declines with spectral type from M7 through L3, after which the data do not show a clear trend. Using one-dimensional chromosphere models, we explore the range of filling factors and chromospheric temperature structures that are consistent with H$\alpha$ observations of M0-L7 dwarfs. M dwarf chromospheres have a similar, smoothly varying range of temperature and surface coverage while L dwarf chromospheres are cooler and have smaller filling factors.Comment: 24 pages and 13 figures, submitted to AJ. A short video describing these results can be found at https://www.youtube.com/watch?v=wwX5WkuJCU

Waste-Wood-Derived Fillers for Plastics

Filled thermoplastic composites are stiffer, stronger, and more dimensionally stable than their unfilled counterparts. Such thermoplastics are usually provided to the end-user as a precompounded, pelletized feedstock. Typical reinforcing fillers are inorganic materials like talc or fiberglass, but materials derived from waste wood, such as wood flour and recycled paper fiber, are also effective as fillers. The goal of this project was to generate commercial interest in using waste-wood–paper-derived fillers (WPFs) to reinforce thermoplastics. The research strategy was twofold: developmental research and outreach. Specific objectives were (1) to improve wastepaper fiber preparation, feeding, and compounding methods, and optimize composite performance, and (2) to communicate to end-product manufacturers the advantages of WPF thermoplastics. The research was led and supported by the Forest Products Laboratory (FPL), with input from a consortium of 15 fiber suppliers and plastics manufacturers. Additional funding was provided by the Wisconsin Department of Natural Resources. Equipment was leased and installed at FPL. Eight general purpose formulations were developed—they included extrusion and injection molding grades of both polyethylene and polypropylene, reinforced with WPFs. An information packet containing performance data, appropriate processing conditions, sample pellets, sample parts, and a questionnaire was sent to nearly 500 commercial plastics manufacturers in Wisconsin, Illinois, and Michigan. In response to requests for in-house trials, FPL researchers conducted nearly 18 site visits. The researchers ensured proper handling of the material, provided consultation, and gathered information about processing and performance. The trials went very well, and parts were successfully manufactured at all facilities. Products included automobile trim components and housings, vacuum cleaner parts, paint brush handles, bicycle parts, cosmetic cases, and other household items. Great interest has been shown in the use of WPF thermoplastics; one consortium member is establishing a 4 million kg/yr (9 million lb/yr) facility. Total market demand is conservatively expected to exceed 45 million kg/yr (100 million lb/yr)

Completed cohomology of Shimura curves and a p-adic Jacquet-Langlands correspondence

We study indefinite quaternion algebras over totally real fields F, and give an example of a cohomological construction of p-adic Jacquet-Langlands functoriality using completed cohomology. We also study the (tame) levels of p-adic automorphic forms on these quaternion algebras and give an analogue of Mazur's `level lowering' principle.Comment: Updated version. Contains some minor corrections compared to the published versio

Spectroscopy of Quasar Candidates from SDSS Commissioning Data

The Sloan Digital Sky Survey has obtained images in five broad-band colors for several hundred square degrees. We present color-color diagrams for stellar objects, and demonstrate that quasars are easily distinguished from stars by their distinctive colors. Follow-up spectroscopy in less than ten nights of telescope time has yielded 22 new quasars, 9 of them at $z> 3.65$, and one with $z = 4.75$, the second highest-redshift quasar yet known. Roughly 80% of the high-redshift quasar candidates selected by color indeed turn out to be high-redshift quasars.Comment: 4 pages, 3 figures, to appear in the proceedings of "After the Dark Ages: When Galaxies were Young (the Universe at 2<z<5)", 9th Annual October Astrophysics Conference in Marylan