D-XY Critical Behavior in Cuprate Superconductors

We outline the universal and finite temperature critical properties of the 3D-XY model, extended to anisotropic extreme type-II superconductors, as well as the universal quantum critical properties in 2D. On this basis we review: (i) the mounting evidence for 3D-XY behavior in optimally doped cuprate superconductors and the 3D to 2D crossover in the underdoped regime; (ii) the finite size limitations imposed by inhomogeneities; (iii) the experimental evidence for a 2D-XY quantum critical point in the underdoped limit, where the superconductor to insulator transition occurs; (iv) the emerging implications and constraints for microscopic models.Comment: 5 pages, 6 figure

Magnetic Field induced Dimensional Crossover Phenomena in Cuprate Superconductors and their Implications

We discuss the occurrence of crossing points in the magnetization - temperature $(m,T$) plane within the framework of critical phenomena. It is shown that in a two-dimensional superconducting slab of thickness $d_{s}$ $m_{z}(\delta)$ versus temperature $T$ curves measured in different fields $\mathbf{H} = H(0,\sin (\delta) ,\cos (\delta))$ will cross at the critical temperature T_c of the slab. In contrast, in a 3D anisotropic bulk superconductor the crossing point occurs in the plot $m_{z}(\delta) /H_{z}^{1/2}$ versus $T$. The experimental facts that 2D crossing point features have been observed in ceramics and in single crystals for $\mathbf{H}$ close to $\mathbf{H} = H(0,0,1)$, but not for $\mathbf{H} = H(0,1,0)$, is explained in terms of an angle-dependent crossover field separating the regions where 2D or 3D thermal fluctuations dominate. The measured 2D-crossing point data are used to estimate one of the fundamental parameters of cuprate superconductors, the minimum thickness of the slab $(d_{s})$, which remains superconducting. Our estimates, based on experimental 2D-crossing point data for single crystals, reveal that this length adopts material dependent values. Therefore, experimental data for T_c and $\lambda_{\Vert}^{2}(T=0)$, plotted in terms of T_c versus $1/\lambda_{\Vert}^{2}(T=0)$ will not tend to a straight line with universal slope as the underdoped limit is approached. Implications for magnetic torque measurements are also worked out

Improvement of the guiding performances of near infrared organic/inorganic channel waveguides

New sol-gel derived organic/inorganic hybrid single mode waveguides devices have been developed for telecommunication applications in the two near infrared windows at 1310 and 1550 nm. The overall procedure of fabrication of these devices is described and the refractive indices of the guiding, the buffer and the protective layers are adjusted by a precise control of the materials' composition. Due to the improvement of the composition of the guiding layer, the attenuation losses are significantly decreased to 0.8 dB/cm and 2dB/cm at respectively 1310 and 1550 nm

Small scale fracture of multi metal carbide coatings

The micromechanical behavior of sputtered multi metal carbide (Hf-Nb-Ta-Zr)C coatings was investigated. A equiatomic high entropy alloy (Hf-Nb-Ta-Zr) and high density graphite were used as targets to reactively sputter carbide coatings on Si (100) with a silicon nitride buffer layer at different substrate temperatures (RT, 300, 450, 600 and 750 0C). Energy and wavelength dispersive x-ray spectra confirmed that the metal compositions were equiatomic with a carbon content close to stoichiometric value. X-ray diffraction revealed that a single phase with a rocksalt structure was obtained for all deposition conditions. Furthermore, XRD measurements highlighted that crystallinity improved markedly with increasing deposition temperatures and the magnitude of compressive stresses reduced, concomitantly. For the highest temperature, tensile stresses of 500MPa was noted. Optical microscopy also revealed extensive mud cracking of the film deposited at 750°C, consistent with high tensile stresses. Microstructures characterized by transmission electron microscopy revealed columnar grains with nanocrystalline dimensions. Coatings deposited at 600°C showed the highest hardness and indentation modulus of 32 and 350 GPa, respectively, measured with the continuous stiffness mode. Focused ion beam machining is used fabricate micro cantilever which are tested in situ in a SEM to evaluate fracture properties of these complex carbide coatings. Nanoindentation based toughness measurements are underway to compare toughness estimates these two techniques

The Benefish consortium reports on the influence of system water refreshment rates on realized feed load, weight development, fish physiology and behaviour in turbot

Farmers with recirculation aquaculture systems (RAS) have a greater necessity and capacity to control the culture conditions of their farms than farmers with other aquaculture systems. Water quality is one of the factors that is closely monitored and managed in order to maintain the optimal levels of oxygen, ammonia, temperature, pH, and CO2. Effects of these parameters on growth and health are well studied and almost immediately noticeable. In RAS it often occurs that, although water quality conditions seem to be optimal, the feed intake of the fish might suddenly diminishes, thus reflecting a situation of sub optimal welfare of the animals. This phenomenon is particular relevant in marine RAS where these situations of reduced feed intake occur even though the normally monitored water quality parameters and husbandry conditions appear to be optimal. Similar phenomena also occur in other aquaculture culture systems, such as flow through systems, where feed intake fluctuates whilst the reasons are not always known, although there is typically less control and monitoring compared with RAS. It is therefore necessary to actively monitor deviation of expected feed intake, in combination with the monitoring of culture conditions and farm management on pilot-scale level. Only through this intermediate level experimental work and farm observations for the assumed relationship between deviation of expected feed intake and fish welfare can be validated. It is furthermore necessary to provide refinements to causative relationships expected to be found on commercial farms, where it is often claimed that e.g. lower system water refreshment rates or more closed RAS are leading to growth retardation and lower feed intake in fish and thus lower production. The present study is, therefore, intending to prove the hypothesis that changes in feed intake can be associated with changed fish welfare status, using turbot as model species. It is furthermore hypothesized that this changed fish welfare status is caused by different system water refreshment rates and fish and system management. As a final result, feed intake should relate by same efficiency to lower fish growth in closed RAS compared to flow through systems. The objectives are therefore to validate the relationships between deviation from expected feed intake and fish welfare, and their causative factors on the commercial farms interpreting data on feed intake, behavior, endocrinology and immune patterns as welfare indicators

Progress on a gas-accepting ion source for continuous-flow accelerator mass spectrometry

Author Posting. © Elsevier B.V., 2007. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 259 (2007): 83-87, doi:10.1016/j.nimb.2007.01.189.A gas-accepting microwave-plasma ion source is being developed for continuous-flow Accelerator Mass Spectrometry (AMS). Characteristics of the ion source will be presented. Schemes for connecting a gas or liquid chromatograph to the ion source will also be discussed

Electronic and optical properties of LiBC

LiBC, a semiconducting ternary borocarbide constituted of the lightest elements only, has been synthesized and characterized by x-ray powder diffraction, dielectric spectroscopy, and conductivity measurements. Utilizing an infrared microscope the phonon spectrum has been investigated in single crystals. The in-plane B-C stretching mode has been detected at 150 meV, noticeably higher than in AlB2, a non-superconducting isostructural analog of MgB2. It is this stretching mode, which reveals a strong electron-phonon coupling in MgB2, driving it into a superconducting state below 40 K, and is believed to mediate predicted high-temperature superconductivity in hole-doped LiBC [H. Rosner, A. Kitaigorodsky, and W. E. Pickett, Phys. Rev. Lett. 88, 127001 (2002)].Comment: 4 pages, 4 figure

Early detection of plant diseases using spectral data

Early detection of crop disease is an essential step in food security. Usually, the detection becomes possible in a stage where disease symptoms are already visible on the aerial part of the plant. However, once the disease has manifested in different parts of the plant, little can be done to salvage the situation. Here, we suggest that the use of visible and near infrared spectral information facilitates disease detection in cassava crops before symptoms can be seen by the human eye. To test this hypothesis, we grow cassava plants in a screen house where they are inoculated with disease viruses. We monitor the plants over time collecting both spectra and plant tissue for wet chemistry analysis. Our results demonstrate that suitably trained classifiers are indeed able to detect cassava diseases. Specifically, we consider Generalized Matrix Relevance Learning Vector Quantization (GMLVQ) applied to original spectra and, alternatively, in combination with dimension reduction by Principal Component Analysis (PCA). We show that successful detection is possible shortly after the infection can be confirmed by wet lab chemistry, several weeks before symptoms manifest on the plants