54 research outputs found
IST Austria Thesis
Many flows encountered in nature and applications are characterized by a chaotic motion known as turbulence. Turbulent flows generate intense friction with pipe walls and are responsible for considerable amounts of energy losses at world scale. The nature of turbulent friction and techniques aimed at reducing it have been subject of extensive research over the last century, but no definite answer has been found yet. In this thesis we show that in pipes at moderate turbulent Reynolds numbers friction is better described by the power law first introduced by Blasius and not by the Prandtl–von Kármán formula. At higher Reynolds numbers, large scale motions gradually become more important in the flow and can be related to the change in scaling of friction. Next, we present a series of new techniques that can relaminarize turbulence by suppressing a key mechanism that regenerates it at walls, the lift–up effect. In addition, we investigate the process of turbulence decay in several experiments and discuss the drag reduction potential. Finally, we examine the behavior of friction under pulsating conditions inspired by the human heart cycle and we show that under such circumstances turbulent friction can be reduced to produce energy savings
Relaminarization of pipe flow by means of 3d-printed shaped honeycombs
Based on a novel control scheme, where a steady modification of the
streamwise velocity profile leads to complete relaminarization of initially
fully turbulent pipe flow, we investigate the applicability and usefulness of
custom-shaped honeycombs for such control. The custom-shaped honeycombs are
used as stationary flow management devices which generate specific
modifications of the streamwise velocity profile. Stereoscopic particle image
velocimetry and pressure drop measurements are used to investigate and capture
the development of the relaminarizing flow downstream these devices. We compare
the performance of straight (constant length across the radius of the pipe)
honeycombs with custom-shaped ones (variable length across the radius). An
attempt is made to find the optimal shape for maximal relaminarization at
minimal pressure loss. The maximum attainable Reynolds number for total
relaminarization is found to be of the order of 10.000. Consequently the
respective reduction in skin friction downstream of the device is almost by a
factor of 5. The break-even point, where the additional pressure drop caused by
the device is balanced by the savings due to relaminarization and a net gain is
obtained, corresponds to a downstream stretch of distances as low as approx.\
100 pipe diameters of laminar flow
Relaminarising pipe flow by wall movement
Following the recent observation that turbulent pipe flow can be
relaminarised by a relatively simple modification of the mean velocity profile,
we here carry out a quantitative experimental investigation of this phenomenon.
Our study confirms that a flat velocity profile leads to a collapse of
turbulence and in order to achieve the blunted profile shape, we employ a
moving pipe segment that is briefly and rapidly shifted in the streamwise
direction. The relaminarisation threshold and the minimum shift length and
speeds are determined as a function of Reynolds number. Although turbulence is
still active after the acceleration phase, the modulated profile possesses a
severely decreased lift-up potential as measured by transient growth. As shown,
this results in an exponential decay of fluctuations and the flow
relaminarises. While this method can be easily applied at low to moderate flow
speeds, the minimum streamwise length over which the acceleration needs to act
increases linearly with the Reynolds number.Comment: 13 pages, 9 figure
Relaminarization by steady modification of the streamwise velocity profile in a pipe
We show that a rather simple, steady modification of the streamwise velocity profile in a pipe can lead to a complete collapse of turbulence and the flow fully relaminarizes. Two different devices, a stationary obstacle (inset) and a device which injects fluid through an annular gap close to the wall, are used to control the flow. Both devices modify the streamwise velocity profile such that the flow in the center of the pipe is decelerated and the flow in the near wall region is accelerated. We present measurements with stereoscopic particle image velocimetry to investigate and capture the development of the relaminarizing flow downstream these devices and the specific circumstances responsible for relaminarization. We find total relaminarization up to Reynolds numbers of 6000, where the skin friction in the far downstream distance is reduced by a factor of 3.4 due to relaminarization. In a smooth straight pipe the flow remains completely laminar downstream of the control. Furthermore, we show that transient (temporary) relaminarization in a spatially confined region right downstream the devices occurs also at much higher Reynolds numbers, accompanied by a significant local skin friction drag reduction. The underlying physical mechanism of relaminarization is attributed to a weakening of the near-wall turbulence production cycle
Discontinuous epidemic transition due to limited testing
High impact epidemics constitute one of the largest threats humanity is facing in the 21st century. In the absence of pharmaceutical interventions, physical distancing together with testing, contact tracing and quarantining are crucial in slowing down epidemic dynamics. Yet, here we show that if testing capacities are limited, containment may fail dramatically because such combined countermeasures drastically change the rules of the epidemic transition: Instead of continuous, the response to countermeasures becomes discontinuous. Rather than following the conventional exponential growth, the outbreak that is initially strongly suppressed eventually accelerates and scales faster than exponential during an explosive growth period. As a consequence, containment measures either suffice to stop the outbreak at low total case numbers or fail catastrophically if marginally too weak, thus implying large uncertainties in reliably estimating overall epidemic dynamics, both during initial phases and during second wave scenarios
Cardiac-cycle-inspired turbulent drag reduction.
Flows through pipes and channels are in practice almost always turbulent and the eddying motion is responsible for the major part of the encountered friction losses and pumping costs. Conversely, for pulsatile flows, in particular for aortic blood flow, turbulence levels remain surprisingly low, despite relatively large peak velocities. Indeed, in this latter case, high turbulence levels are intolerable as they would damage the shear-sensitive endothelial cell layer. We here show that turbulence in ordinary pipe flow is diminished if the flow is driven in a pulsatile mode that incorporates all the key features of the cardiac waveform. At Reynolds numbers comparable to aortic blood flow, turbulence is largely inhibited, whereas, at much higher speeds, the turbulent drag is reduced by more than 25%. This specific operation mode is considerably more efficient when compared to steady driving, which is the status quo for virtually all fluid transport processes ranging from heating circuits to water, gas and oil pipelines.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Turbulence suppression by cardiac-cycle-inspired driving of pipe flow.
Flows through pipes and channels are, in practice, almost always turbulent, and the multiscale eddying motion is responsible for a major part of the encountered friction losses and pumping costs1. Conversely, for pulsatile flows, in particular for aortic blood flow, turbulence levels remain low despite relatively large peak velocities. For aortic blood flow, high turbulence levels are intolerable as they would damage the shear-sensitive endothelial cell layer. Here we show that turbulence in ordinary pipe flow is diminished if the flow is driven in a pulsatile mode that incorporates all the key features of the cardiac waveform. At Reynolds numbers comparable to those of aortic blood flow, turbulence is largely inhibited, whereas at much higher speeds, the turbulent drag is reduced by more than 25%. This specific operation mode is more efficient when compared with steady driving, which is the present situation for virtually all fluid transport processes ranging from heating circuits to water, gas and oil pipelines.grant 189662962 of the Simons foundation, grant 075-15-2019-1893 de la Austrian Science Fund, y
el grant I4188-N30, de Deutsche Forschungsgemeinschaft research unit FOR 268
Explosive Transitions in Epidemic Dynamics
Standard epidemic models exhibit one continuous, second order phase
transition to macroscopic outbreaks. However, interventions to control
outbreaks may fundamentally alter epidemic dynamics. Here we reveal how such
interventions modify the type of phase transition. In particular, we uncover
three distinct types of explosive phase transitions for epidemic dynamics with
capacity-limited interventions. Depending on the capacity limit, interventions
may (i) leave the standard second order phase transition unchanged but
exponentially suppress the probability of large outbreaks, (ii) induce a
first-order discontinuous transition to macroscopic outbreaks, or (iii) cause a
secondary explosive yet continuous third-order transition. These insights
highlight inherent limitations in predicting and containing epidemic outbreaks.
More generally our study offers a cornerstone example of a third order
explosive phase transition in complex systems.Comment: Main manuscript: 5 pages, 3 figures; Supplemental material: 27 pages,
13 figure
The epidemiology of malignant mesothelioma in women: gender differences and modalities of asbestos exposure
INTRODUCTION: The epidemiology of gender differences for mesothelioma incidence has been rarely discussed in national case lists. In Italy an epidemiological surveillance system (ReNaM) is working by the means of a national register. METHODS: Incident malignant mesothelioma (MM) cases in the period 1993 to 2012 were retrieved from ReNaM. Gender ratio by age class, period of diagnosis, diagnostic certainty, morphology and modalities of asbestos exposure has been analysed using exact tests for proportion. Economic activity sectors, jobs and territorial distribution of mesothelioma cases in women have been described and discussed. To perform international comparative analyses, the gender ratio of mesothelioma deaths was calculated by country from the WHO database and the correlation with the mortality rates estimated. RESULTS: In the period of study a case list of 21 463 MMs has been registered and the modalities of asbestos exposure have been investigated for 16 458 (76.7%) of them. The gender ratio (F/M) was 0.38 and 0.70 (0.14 and 0.30 for occupationally exposed subjects only) for pleural and peritoneal cases respectively. Occupational exposures for female MM cases occurred in the chemical and plastic industry, and mainly in the non-asbestos textile sector. Gender ratio proved to be inversely correlated with mortality rate among countries. CONCLUSIONS: The consistent proportion of mesothelioma cases in women in Italy is mainly due to the relevant role of non-occupational asbestos exposures and the historical presence of the female workforce in several industrial settings. Enhancing the awareness of mesothelioma aetiology in women could support the effectiveness of welfare system and prevention policies
The epidemiology of malignant mesothelioma in women: gender differences and modalities of asbestos exposure
ntroduction The epidemiology of gender differences
for mesothelioma incidence has been rarely discussed in
national case lists. In Italy an epidemiological surveillance
system (ReNaM) is working by the means of a national
register.
Methods Incident malignant mesothelioma (MM)
cases in the period 1993 to 2012 were retrieved from
ReNaM. Gender ratio by age class, period of diagnosis,
diagnostic certainty, morphology and modalities of
asbestos exposure has been analysed using exact
tests for proportion. Economic activity sectors, jobs
and territorial distribution of mesothelioma cases in
women have been described and discussed. To perform
international comparative analyses, the gender ratio of
mesothelioma deaths was calculated by country from the
WHO database and the correlation with the mortality
rates estimated.
Results In the period of study a case list of 21 463
MMs has been registered and the modalities of asbestos
exposure have been investigated for 16 458 (76.7%) of
them. The gender ratio (F/M) was 0.38 and 0.70 (0.14
and 0.30 for occupationally exposed subjects only) for
pleural and peritoneal cases respectively. Occupational
exposures for female MM cases occurred in the chemical
and plastic industry, and mainly in the non-asbestos
textile sector. Gender ratio proved to be inversely
correlated with mortality rate among countries.
Conclusions The consistent proportion of
mesothelioma cases in women in Italy is mainly due to
the relevant role of non-occupational asbestos exposures
and the historical presence of the female workforce in
several industrial settings. Enhancing the awareness of
mesothelioma aetiology in women could support the
effectiveness of welfare system and prevention policie
- …