Development of dispersion-strengthened Ni-Cr-ThOz alloys for the space shuttle thermal protection system

Manufacturing processes were developed for TD-NiCr providing small sheet (45 x 90 cm), and larger sheet (60 x 150 cm) and foil. The alternate alloy, DS-NiCr, was produced by pack-chromizing Ni-ThO2 sheet. Formability criteria are being established for basic sheet forming processes, which are brake forming, corrugation forming, joggling, dimpling, and beading. Resistance spot welding (fusion and solid state), resistance seam welding, solid state diffusion welding, and brazing are included in the joining programs. Major emphasis is centered on an Al-modified Ni-Cr-ThO2 alloy development. These alloys, containing 3 to 5% Al, form the protective Al2O3 scale. This enhances oxidation resistance under reentry conditions. Both TD-NiCrAl and DS-NiCrAl alloys are included. A tentative composition of Ni-16Cr-3.5Al-2ThO2 was selected based on oxidation resistance and fabricability

SIRIS: a high resolution scanning infrared camera for examining paintings

The new SIRIS (Scanning InfraRed Imaging System) camera developed at the National Gallery in London allows highresolution images of paintings to be made in the near infrared region (900–1700 nm). Images of 5000 × 5000 pixels are made by moving a 320 × 256 pixel InGaAs array across the focal plane of the camera using two orthogonal translation stages. The great advantages of this camera over scanning infrared devices are its relative portability and that image acquisition is comparatively rapid – a full 5000 × 5000 pixel image can be made in around 20 minutes. The paper describes the development of the mechanical, optical and electronic components of the camera, including the design of a new lens. The software routines used to control image capture and to assemble the individual 320 × 256 pixel frames into a seamless mosaic image are also mentioned. The optics of the SIRIS camera have been designed so that the camera can operate at a range of resolutions; from around 2.5 pixels per millimetre on large paintings of up to 2000 × 2000 mm to 10 pixels per millimetre on smaller paintings or details of paintings measuring 500 × 500 mm. The camera is primarily designed to examine underdrawings in paintings; preliminary results from test targets and paintings are presented and the quality of the images compared with those from other cameras currently used in this field

Further to the Occurrence of Red Abalone, Haliotis rufescens, in British Columbia

We report on additional occurrences of Red Abalone (Haliotis rufescens Swainson, 1822) that bring the total to seven from British Columbia coastal waters. Possible causes of the presence of Red Abalone include northward (winter) transport via kelp rafts from the Oregon-California area. We tested this hypothesis by performing DNA barcoding analyses on a fragment of kelp holdfast on the surface of one such shell establishing its identity as Nereocystis luetkeana (Mertens) Postels & Ruprecht - a giant kelp with a hollow stipe terminating in a bulbous pneumatocyst (gas-filled float). The occurrence of Red Abalone due to natural processes, besides being important biogeographically, has had important implications for indigenous peoples' pre- and post-contact trade and material culture

Insulation bonding test system

A method and a system for testing the bonding of foam insulation attached to metal is described. The system involves the use of an impacter which has a calibrated load cell mounted on a plunger and a hammer head mounted on the end of the plunger. When the impacter strikes the insulation at a point to be tested, the load cell measures the force of the impact and the precise time interval during which the hammer head is in contact with the insulation. This information is transmitted as an electrical signal to a load cell amplifier where the signal is conditioned and then transmitted to a fast Fourier transform (FFT) analyzer. The FFT analyzer produces energy spectral density curves which are displayed on a video screen. The termination frequency of the energy spectral density curve may be compared with a predetermined empirical scale to determine whether a igh quality bond, good bond, or debond is present at the point of impact

Identifying and explaining framing strategies of low carbon lifestyle movement organisations

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.Over the last decade we have seen the growth and development of low carbon lifestyle movement organisations, which seek to encourage members of the public to reduce their personal energy use and carbon emissions. As a first step to assess the transformational potential of such organisations, this paper examines the ways in which they frame their activities. This reveals an important challenge they face: in addressing the broader public, do they promote 'transformative' behaviours or do they limit themselves to encouraging 'easy changes' to maintain their appeal? We find evidence that many organisations within this movement avoid 'transformative' frames. The main reasons for this are organisers' perceptions that transformational frames lack resonance with broader audiences, as well as wider cultural contexts that caution against behavioural intervention. The analysis draws on interviews with key actors in the low carbon lifestyle movement and combines insights from the literatures on collective action framing and lifestyle movements.This research was supported by grant RES-628-25-0059 for the project “Community-based initiatives for energy saving” which is part of the RCUK Energy and Communities Programme and ESRC grant RES-595-28-0001 which funded the project “The Third Sector and the Environment” within the Third Sector Research Centre at the University of Southampton. We would like to thank Rebecca Edwards for collecting interview data on the “third sector” project, as well as our colleagues on the Energy and Communities project for their role in the wider project design, including Patrick James, Tom Rushby and Nicholas Woodman. We are also very grateful to our research participants without whom this research would not have been possible. All remaining weaknesses remain our responsibility

The significance of lifeworld and the case of hospice

Questions on what it means to live and die well are raised and discussed in the hospice movement. A phenomenological lifeworld perspective may help professionals to be aware of meaningful and important dimensions in the lives of persons close to death. Lifeworld is not an abstract philosophical term, but rather the opposite. Lifeworld is about everyday, common life in all its aspects. In the writings of Cicely Saunders, known as the founder of the modern hospice movement, facets of lifeworld are presented as important elements in caring for dying patients. Palliative care and palliative medicine today are, in many ways, replacing hospices. This represents not only a change in name, but also in the main focus. Hospice care was originally very much about providing support and comfort for, and interactions with the patients. Improved medical knowledge today means improved symptomatic palliation, but also time and resources spent in other ways than before. Observations from a Nordic hospice ward indicate that seriously ill and dying persons spend much time on their own. Different aspects of lifeworld and intersubjectivity in the dying persons’ room is presented and discussed

A new approach to assess the normalization of differential rates of protest participation

This is the author accepted manuscript. The final version is available from Springer Verlag via the DOI in this recordResearch that compares those who do and do not participate in protest over time purports that protesters are becoming increasingly similar to the non-protesting population. Using a protest survey that includes the frequency of protest participation, we consider the extent to which those who protest to different degrees are similar to non-protesters. Selection bias in nonprobability protest survey data is compensated for by combining the data with random reference samples from the European Social Survey under a quasi-randomisation approach. We test hypotheses on the normalization of protesters and compare two methods for compensating for selection bias: a proportional weighting method and a propensity score adjustment method. The propensity score adjustment method is more effective in mitigating selection bias by balancing on variables that explain the selection and outcome, and enables the comparison of groups of protesters to non-protesters. We find that protesters become increasingly differentiated from non-protesters as their extent of protest participation increases according to their left-wing self-placement and education.Economic and Social Research Council (ESRC)British Academ

Comorbidity and Quality of Life in Adults with Hair Pulling Disorder

Hair pulling disorder (HPD; trichotillomania) is thought to be associated with significant psychiatric comorbidity and functional impairment. However, few methodologically rigorous studies of HPD have been conducted, rendering such conclusions tenuous. The following study examined comorbidity and psychosocial functioning in a well-characterized sample of adults with HPD (N=85) who met DSM-IV criteria, had at least moderate hair pulling severity, and participated in a clinical trial. Results revealed that 38.8% of individuals with HPD had another current psychiatric diagnosis and 78.8% had another lifetime (present and/or past) psychiatric diagnosis. Specifically, HPD showed substantial overlap with depressive, anxiety, addictive, and other body-focused repetitive behavior disorders. The relationships between certain comorbidity patterns, hair pulling severity, current mood and anxiety symptoms, and quality of life were also examined. Results showed that current depressive symptoms were the only predictor of quality of life deficits. Implications of these findings for the conceptualization and treatment of HPD are discussed