Untersuchungen optischer Eigenschaften von porösen Strukturen auf der Basis von III-V-Halbleiterverbindungen

In der Arbeit wurden sowohl optische, als auch Schwingungs- und Struktur-Eigenschaften poröser Strukturen auf der Basis von n-GaP, n-GaAs und n-InP mit Hilfe der Raman- und FTIR- Spektroskopie untersucht. Speziell den in polaren Materialien auftretenden Fröhlich-Moden wurde dabei besondere Aufmerksamkeit gewidmet. Es wurden experimentelle Ergebnisse theoretischen Modellen auf der Basis der Effektiven Medien Theorie gegenübergestellt. Die Ergebnisse sollen helfen, Grundkenntnisse über die Eigenschaften poröser Halbleiterstrukturen zu gewinnen, um zum einen Anwendungsmöglichkeiten zu erschließen und zum anderen das theoretische Modell zur Beschreibung heterogener Medien zu vervollkommnen

Impact of Sb and Na Doping on the Surface Electronic Landscape of Cu2ZnSnS4 Thin Films

Open-circuit voltage deficiency is the key limiting factor in Cu2ZnSnS4 (CZTS) thin-film solar cells, which is commonly associated with band tails and deep gap states arising from elemental disorder. The introduction of dopants such as Na and Sb has led to improvement in device performance, yet their effects on the optoelectronic properties of CZTS are yet to be fully elucidated. In this Letter, we unraveled the effect of Sb and Na:Sb co-doping on the surface energy landscape of solution-processed CZTS films employing energy-filtered photoelectron emission microscopy. In the absence of the additives, 150 nm resolution photoemission maps reveal oscillations in the local effective work function as well as areas of low photoemission energy threshold. The introduction of dopants substantially reshapes the photoemission maps, which we rationalize in terms of Cu:Zn and Sn disorder. Finally, we establish unprecedented correlations between the photoemission landscape of thin films and the performance of over 200 devices

Designing the Mission Operations for the Pointable Radiometer for Observation of Volcanic Emissions (PROVE) Pathfinder Payload

The PROVE Pathfinder CubeSat payload is a 2U Visual and TIR imaging payload optimized for observation of volcanic ash clouds for 3D reconstruction. Three of the main challenges for the mission operations of payload are optimization of the observation geometry (num. images, angles, etc.), data management of a high data rate payload, and observation scheduling for sporadic eruptions. Example solutions to these problems are presented belo

Highly Porous and Ultra-Lightweight Aero-Ga2O3: Enhancement of Photocatalytic Activity by Noble Metals

A new type of photocatalyst is proposed on the basis of aero-β-Ga2O3, which is a material constructed from a network of interconnected tetrapods with arms in the form of microtubes with nanometric walls. The aero-Ga2O3 material is obtained by annealing of aero-GaN fabricated by epitaxial growth on ZnO microtetrapods. The hybrid structures composed of aero-Ga2O3 functionalized with Au or Pt nanodots were tested for the photocatalytic degradation of methylene blue dye under UV or visible light illumination. The functionalization of aero-Ga2O3 with noble metals results in the enhancement of the photocatalytic performances of bare material, reaching the performances inherent to ZnO while gaining the advantage of the increased chemical stability. The mechanisms of enhancement of the photocatalytic properties by activating aero-Ga2O3 with noble metals are discussed to elucidate their potential for environmental applications

Enhanced UV/blue fluorescent sensing using metal-dielectric-metal aperture nanoantenna arrays

Subwavelength aperture antenna arrays are designed and fabricated for potential applications in fluorescence sensing in the near UV/blue range. They are designed using finite-difference time-domain (FDTD) simulation, fabricated using focused ion beam etching and characterised using angular Fourier spectroscopy. The aperture arrays are formed in the top layer of an aluminum-silica-aluminum trilayer and produce a maximum simulated field intensity enhancement of 5.8 times at 406 nm and highly directive emission with a beamwidth of 8.3 deg. The normal incidence reflection response has been measured and shows reasonable agreement with modelled results. In addition, to investigate higher field intensity enhancements, bowtie aperture arrays are simulated and the influence of parameters such as dielectric gap, position of dipole source, and aperture shape and size are discussed and show enhancements up to 67 times are possible

Mapping Shunting Paths at the Surface of Cu2ZnSn(S,Se)4 Films via Energy-Filtered Photoemission Microscopy

Summary: The performance of Cu2ZnSn(S,Se)4 thin-film solar cells, commonly referred to as kesterite or CZTSSe, is limited by open-circuit voltage (VOC) values less than 60% of the maximum theoretical limit. In the present study, we employ energy-filtered photoemission microscopy to visualize nanoscale shunting paths in solution-processed CZTSSe films, which limit the VOC of cells to approximately 400 mV. These studies unveil areas of local effective work function (LEWF) narrowly distributed around 4.9 eV, whereas other portions show hotspots with LEWF as low as 4.2 eV. Localized valence band spectra and density functional theory calculations allow rationalizing the LEWF maps in terms of the CZTSSe effective work function broadened by potential energy fluctuations and nanoscale Sn(S,Se) phases. : Chemistry; Materials Science; Energy Materials Subject Areas: Chemistry, Materials Science, Energy Material

Impact of Sb and Na Doping on the Surface Electronic Landscape of Cu₂ZnSnS₄ Thin Films

Open-circuit voltage deficiency is the key limiting factor in Cu2ZnSnS4 (CZTS) thin-film solar cells, which is commonly associated with band tails and deep gap states arising from elemental disorder. The introduction of dopants such as Na and Sb has led to improvement in device performance, yet their effects on the optoelectronic properties of CZTS are yet to be fully elucidated. In this Letter, we unraveled the effect of Sb and Na:Sb co-doping on the surface energy landscape of solution-processed CZTS films employing energy-filtered photoelectron emission microscopy. In the absence of the additives, 150 nm resolution photoemission maps reveal oscillations in the local effective work function as well as areas of low photoemission energy threshold. The introduction of dopants substantially reshapes the photoemission maps, which we rationalize in terms of Cu:Zn and Sn disorder. Finally, we establish unprecedented correlations between the photoemission landscape of thin films and the performance of over 200 devices