6,555 research outputs found
On wavenumber spectra for sound within subsonic jets
This paper clarifies the nature of sound spectra within subsonic jets. Three
problems, of increasing complexity, are presented. Firstly, a point source is
placed in a two-dimensional plug flow and the sound field is obtained
analytically. Secondly, a point source is embedded in a diverging axisymmetric
jet and the sound field is obtained by solving the linearised Euler equations.
Finally, an analysis of the acoustic waves propagating through a turbulent jet
obtained by direct numerical simulation is presented. In each problem, the
pressure or density field are analysed in the frequency-wavenumber domain. It
is found that acoustic waves can be classified into three main
frequency-dependent groups. A physical justification is provided for this
classification. The main conclusion is that, at low Strouhal numbers, acoustic
waves satisfy the d'Alembertian dispersion relation.Comment: 20 pages, 9 figure
Upgraded demonstration vehicle task report
Vehicle/battery performance capabilities and interface problems that occurred when upgraded developmental batteries were integrated with upgraded versions of comercially available electric vehicles were investigated. Developmental batteries used included nickel zinc batteries, a nickel iron battery, and an improved lead acid battery. Testing of the electric vehicles and upgraded batteries was performed in the complete vehicle system environment to characterize performance and identify problems unique to the vehicle/battery system. Constant speed tests and driving schedule range tests were performed on a chassis dynamometer. The results from these tests of the upgraded batteries and vehicles were compared to performance capabilities for the same vehicles equipped with standard batteries
Finitely generated ideal languages and synchronizing automata
We study representations of ideal languages by means of strongly connected
synchronizing automata. For every finitely generated ideal language L we
construct such an automaton with at most 2^n states, where n is the maximal
length of words in L. Our constructions are based on the De Bruijn graph.Comment: Submitted to WORDS 201
Airway management in simulated restricted access to a patient - can manikin-based studies provide relevant data?
<p>Abstract</p> <p>Background</p> <p>Alternatives to endotracheal intubation (ETI) are required when access to the cranial end of the patient is restricted. In this study, the success rate and time duration of standard intubation techniques were compared with two different supraglottic devices. Two different manikins were used for the study, and the training effect was studied when the same manikin was repeatedly used.</p> <p>Methods</p> <p>Twenty anaesthesiologists from the Air Ambulance Department used iGEL<sup>™</sup>, laryngeal tube LTSII<sup>™ </sup>and Macintosh laryngoscopes in two scenarios with either unrestricted (scenario A) or restricted (scenario B) access to the cranial end of the manikin. Different manikins were used for ETI and placement of the supraglottic devices. The technique selected by the physicians, the success rates and the times to completion were the primary outcomes measured. A secondary outcome of the study was an evaluation of the learning effect of using the same manikin or device several times.</p> <p>Results</p> <p>In scenario A, all anaesthesiologists secured an airway using each device within the maximum time limit of 60 seconds. In scenario B, all physicians secured the airway on the first attempt with the supraglottic devices and 16 (80%) successfully performed an ETI with either the Macintosh laryngoscope (n = 13, 65%) or with digital technique (n = 3, 15%). It took significantly longer to perform ETI (mean time 28.0 sec +/- 13.0) than to secure an airway with the supraglottic devices (iGel™: mean 12.3 sec +/- 3.6, LTSII™: mean 10.6 sec +/- 3.2). When comparing the mean time required for the two scenarios for each supraglottic device, there was a reduction in time for scenario B (significant for LTSII<sup>™</sup>: 12.1 versus 10.6 seconds, p = 0.014). This may be due to a training effect using same manikin and device several times.</p> <p>Conclusions</p> <p>The amount of time used to secure an airway with supraglottic devices was low for both scenarios, while classic ETI was time consuming and had a low success rate in the simulated restricted access condition. This study also demonstrates that there is a substantial training effect when simulating airway management with airway manikins. This effect must be considered when performing future studies.</p
Identifying capacitive and inductive loss in lumped element superconducting hybrid titanium nitride/aluminum resonators
We present a method to systematically locate and extract capacitive and
inductive losses in superconducting resonators at microwave frequencies by use
of mixed-material, lumped element devices. In these devices, ultra-low loss
titanium nitride was progressively replaced with aluminum in the
inter-digitated capacitor and meandered inductor elements. By measuring the
power dependent loss at 50 mK as the Al-TiN fraction in each element is
increased, we find that at low electric field, i.e. in the single photon limit,
the loss is two level system in nature and is correlated with the amount of Al
capacitance rather than the Al inductance. In the high electric field limit,
the remaining loss is linearly related to the product of the Al area times its
inductance and is likely due to quasiparticles generated by stray radiation. At
elevated temperature, additional loss is correlated with the amount of Al in
the inductance, with a power independent TiN-Al interface loss term that
exponentially decreases as the temperature is reduced. The TiN-Al interface
loss is vanishingly small at the 50 mK base temperature.Comment: 10 pages, 5 figure
- …