7,043 research outputs found
Nuova strumentazione per misure di fisica sanitaria = New instrumentation for the measurement of health physics. EUR 14.i
Slope stability analyses and geological risk reduction: two case studies, from engineering-geological characterization to rockfall runout modeling with intervention proposal
Rock slope instability is a major risk to human life, often leading to economic losses, property damage and maintenance costs, as well as injuries or death.
Because the rock mass behavior is significantly governed by the presence of joints or other discontinuities, several types of slope failure such as plane failure, toppling failure, wedge failure, buckling failure and circular failure are often observed.
These failures may be gradual with very slow movement of the sliding block or instantaneous without much warning. To understand this process, it is important to study the rock slope (geological data collections, geotechnical collections, data kinematic stability analysis, runout analyses…)
This work is divided in two cases of studies, which are both complementary to study a rock slope stability:
1. The first case of study is an underground quarry of marble located in Levigliani (Luca, Italy), which we did a classification of the rockmass based on the empirical method of Bieniawski (RMR) and also a kinematic analysis of the conditions of stability with the software Rocscience Dips, after a 3D stability analysis was used by the software Rocscience Unwedge which was developed specifically for the use in underground rock mining;
2. For the second case of study is an ex open pit quarry of limestone located in Vecchiano (Pisa, Italy), in which we calculated the trajectories of falling blocks with an advanced numerical method (Rockyfor3D): rigid body approach, capable of analyzing the propagation phase of the volumes detached from the slope; methodology that allowed to simulate the rockfall phenomena through the production of block rebound mechanisms during the descent towards the slope and also we gave an intervention proposal to mitigate the risk; the localization and sizing of the blocks was done by a Digital Terrain Model (DTM)
A case study integrating remote sensing and distinct element analysis to quarry slope stability assessment in the Monte Altissimo area, Italy
This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.enggeo.2014.09.003. First available online 22 September 2014Over last decade geomatic techniques have been increasingly used for the geometrical characterization of rock slopes. Terrestrial laser scanning and digital terrestrial photogrammetry in particular are now frequently used in the characterization of joint surfaces and slope geometry. Although the use of these techniques for the structural characterization of slopes is widely documented, limited research has been undertaken to improve our understanding of the importance of the derived data quality in the construction of slope geometry imported into 3D numerical models. One of the most common problems encountered in the use of these techniques, especially in case of slopes with complex geometry, is the presence of occlusions. In this context, the aims of this paper are to describe how the integrated use of terrestrial laser scanning, digital terrestrial photogrammetry and topographic surveys can mitigate the influence of occlusions and how the slope geometry gained from these surveys can be important in slope stability analyses. For this purpose a case study in the Monte Altissimo area (Apuan Alps, Italy) will be presented. Several geomatic techniques were used for studying a slope overhanging the Granolesa quarry. Special emphasis will be given to the importance of using Total Station and Differential GPS surveys as tools for data fusion. Moreover, in order to validate this procedure, the accuracy and precision of the output were determined through comparison of 3D models derived from laser scanning and digital terrestrial photogrammetry.Furthermore, two different analyses with the three-dimensional distinct element code, 3DEC, were carried out in order to highlight the advantages and limitations of using data obtained from terrestrial remote sensing techniques as opposed to models based on topographic maps.The authors wish to thank the Tuscany Region which funded this research (Announcement 6744/2008 POR CREO 2007–2013). Moreover, we are extremely grateful to Henraux S.p.A., Prof. Pier Lorenzo Fantozzi (University of Siena), Geol. Sergio Mancini, Geol. Vinicio Lorenzoni and Ing. Matteo Lapini (Ingeo Systems s.r.l.) for their assistance and advices in this research
Modello coesivo per l’avanzamento di fratture mediante rilascio nodale di strutture discretizzate con elementi finiti
La simulazione numerica della propagazione di una frattura in MODO I, viaggiante ad elevatavelocità in un acciaio a comportamento duttile è realizzata attraverso un modello coesivo che governa ladistribuzione delle forze di rilascio nodale. Come noto, la ricerca di un valore di tensione all’apice non ha alcunsenso nel caso elastico; infatti, la tensione può essere valutata solo mediante fattori di campo. Nel caso elasto-plastico, incrudimento e softening di origine geometrica o legato al progressivo danneggiamento influisconodecisamente sull’andamento esponenziale del campo tensionale. È possibile comunque individuare un valore diriferimento, di entità finita, mediante estrapolazione delle tensioni elasto-plastiche nella zona di inizio softeningdella frattura. Tale grandezza può essere presa come fattore di riferimento per il calcolo delle forze di rilasciocoesive e quindi dell’energia dissipata. Nel lavoro viene discusso come determinare, dal campo di tensioneelasto-plastico locale, il valore che governa la zona coesiva al variare del T-stress
A geomatic approach for emergency mapping of shallow landslides
Nel presente contributo viene proposto un approccio geomatico per mappare e caratterizzare dal punto di vista geomorfologico i fenomeni franosi superficiali in situazioni di emergenza. Il metodo è stato applicato durante il rilevamento di una frana che il 27/10/2013 ha interessato la falesia costiera della località "Baia dei Porci", nel Comune di Monte di Procida, in provincia di Napoli. Durante il rilevamento, eseguito parzialmente da barca, sono state scattate 95 foto successivamente elaborate con il software Agisoft PhotoScanTM. Il prodotto ottenuto dall'elaborazione è stato un modello digitale 3D della frana (DEM), georeferenziato nel sistema UTM 33N-WGS84. Dall'elaborazione del DEM eseguita in ESRI ArcGisTM è stato possibile ottenere la carta topografica della frana in scala 1:500, la carta delle pendenze, l'area delle zone di distacco e di deposito ed il volume del materiale franato.
Visti i risultati ottenuti si ritiene che l'approccio proposto sia idoneo per essere applicato in situazioni di emergenza provocate da frane superficiali, a supporto delle autorità di Protezione Civile
Elevation modelling and palaeo-environmental interpretation in the Siwa area (Egypt): Application of SAR interferometry and radargrammetry to COSMO-SkyMed imagery
PublishedJournal Article© 2015 Elsevier B.V. Digital elevation models produced from COSMO-SkyMed imagery were used to delineate palaeo-drainage in a wide area surrounding the Siwa and Al-Jaghbub oases of the western Sahara Desert (Egypt and Libya).This new generation of synthetic aperture radar imagery is suitable for this purpose because of its high spatial resolution and capacity to penetrate dry surface sediments. Different techniques such as radar interferometry and radargrammetry were used to produce digital elevation models. These were assessed for accuracy and then combined to produce a single elevation model of the area. The resulting elevation model was used to support the geological study and palaeo-environmental interpretation of the area. It revealed buried features of the landscape, including inactive palaeo-drainage systems. Drainage features were extracted from the elevation model using geographical information systems; results were combined and assessed with respect to geological field data, as well as data from the literature. Previous studies in the area suggest that a wide river, probably the old Nile River, flowed into the Libyan palaeo-Sirte before the Late Messinian drawdown of the Mediterranean Sea. During the Late Messinian lowering of the sea the fluvial system changed shape and carved deep canyons throughout north-eastern Africa. The reported findings on the key Siwa area were used to precisely delineate the physiography of the modern drainage network and to confirm findings from our previous geological research in the area.We gratefully acknowledge Ruggero Matteucci and Johannes Pignatti (La Sapienza, University of Rome), Francesco Checchi (ENI S.p.A., IOEC), Filippo Bonciani and Debora Graziosi (University of Siena) for their collaboration. Research was supported by the ASI (Id 2262) in the framework of the COSMO-SkyMed Announcement of Opportunity project “Application of COSMO-SkyMed data for geological researches in Egypt and Libya”
In situ High Pressure FT-IR Spectroscopy on Alkene Hydroformylation Catalyzed by RhH(CO)(PPh3)3 and Co2(CO)8
- …