172 research outputs found
An optimization procedure based on thermal discomfort minimization to support the design of comfortable Net Zero Energy Buildings
The European standard EN 15251 specifies design criteria for dimensioning of building systems. In detail, it proposes that the adaptive comfort model is used, at first, for dimensioning passive means; but, if indoor operative temperature does not meet the chosen long-term adaptive comfort criterion in the “cooling season”, the design would include a mechanical cooling system. In this case, the reference design criteria are provided accordingly the Fanger comfort model. However, there is a discontinuity by switching from the adaptive to the Fanger model, since the best building variant, according to the former, may not coincide with the optimal according to the latter.
In this paper, an optimization procedure to support the design of a comfort-optimized net zero energy building is proposed. It uses an optimization engine (GenOpt) for driving a dynamic simulation engine (EnergyPlus) towards those building variants that minimize, at first, two seasonal long-term discomfort indices based on an adaptive model; and if indoor conditions do not meet the adaptive comfort limits or analyst’s expectations, it minimizes two seasonal long-term discomfort indices based on the Fanger model. The calculation of such indices has been introduced in EnergyPlus via the Energy Management System module, by writing computer codes in the EnergyPlus Reference Language.
The used long-term discomfort indices proved to provide similar ranking capabilities of building variants, even if they are based on different comfort models, and the proposed procedure meets the two- step procedure suggested by EN 15251 without generating significant discontinuities
First report of pitch canker caused by Fusarium circinatum on Pinus halepensis and Pinus pinea in Apulia (Southern Italy)
Since 2005, pitch canker symptoms have been observed in Apulia (southern Italy, 41°27′42.84″N, 15°33′0.36″E) on numerous trees of Pinus halepensis and P. pinea in urban parks and gardens. Trees showed crown decline as a consequence of dieback of twigs and branches and withering of needles. Bleeding cankers with abundant resin were visible on twigs and branches. The needles of affected twigs and branches wilted, faded, turned yellow, then red, and were discarded. Isolations from symptomatic needles, twigs, and branches were performed on water agar, potato dextrose agar (PDA), and pentachloronitrobenzene medium. A species of Fusarium was consistently isolated from all infected tissues, and pure cultures were obtained by single hyphal tip transfers on PDA and synthetic nutrient agar medium (2). Colonies were incubated at 22 ± 3°C for 7 to 10 days. They produced white aerial mycelia, violet pigment, typically 3-septate macroconidia with slightly curved walls, single-celled microconidia, and characteristic sterile hyphal coils. Microconidia were ovoid or allantoid and born in false heads on aerial polyphialides. The species was identified as Fusarium circinatum Nirenberg & O'Donnell (= F. subglutinans Wollenweb & Reinking) on the basis of morphological and cultural characteristics (3). The identification was confirmed by PCR with specific primers CIRC1A/CIRC4A. The specific primer pair amplified a 360-bp DNA fragment of the two nuclear ribosomal IGS region (4). The pathogenicity of three Italian isolates of F. circinatum from Pinus spp. (Fc1640, Fc1642, and Fc1643 stored in the collection of Dipartimento Scienze Agroambientali, Chimica and Difesa Vegetale, University of Foggia) was evaluated by artificial inoculations on 2-year-old potted seedlings of P. halepensis, P. pinea, P. nigra, P. sylvestris, P. domestica, P. pinaster, P. excelsa, P. radiate, and Pseudotsuga menziesii (10 seedlings for each species and fungal isolate). Small PDA plugs from actively growing colonies of F. circinatum were introduced into a U-shaped cut on the stem of the seedlings and wrapped with moist sterile cottonwool. An equal number of control plants of each Pinus spp. was inoculated with sterile agar. All plants were grown in a nursery at ambient temperature (20 to 28°C). Within 30 days after inoculation, resinous cankers appeared on the stem of the seedlings of P. halepensis, P. pinea, P. domestica, P. pinaster, and P. radiata. Basal needles began to wilt, turn yellow, then red, and were discarded. F. circinatum was reisolated from stems of symptomatic seedlings. No symptoms were observed on seedlings of Pseudotsuga menziesii, P. sylvestris, P. excelsa, and P. nigra or on control seedlings. In Europe, pitch canker caused by F. circinatum previously has been reported only in Spain on P. radiata and P. pinaster (1). There was an unconfirmed report of this disease in Italy (http://www.eppo.org), but to our knowledge, this is the first definite conclusive evidence of the presence of pitch canker of pine in Italy
An Exergy Analysis for Milano Smart City
Cities represent fundamental hubs in the world's energy-flow network, and their role is expected to gain further relevance in the next decades, following the ongoing urbanization process. Reducing energy use and increasing energy efficiency are crucial aspects for both existing and planned cities, and many policies have been established to pursue these objectives. However, in smart cities, as the ones envisioned in many on-going research projects, energy should also be used in a smart way, that is reducing the energy degradation in terms ofcapacity to generate useful work. Starting from the literature, the paper proposes an analysis method, based on exergy, to support smart city planning, with the aim to provide the decision maker with a useful tool to compare and understand the energy-smartness of different scenarios, and to address future energy urban policies. Possibilities and limitations of the analysis method are discussed via the application to the city of Milano that committed to become a smart city
A Zero Energy Concept Building for the Mediterranean Climate
open4siThe Mediterranean climate distinguishes for a mild heating season and a hot (and usually dry) cooling season. All along the year
solar radiation is plentiful and the daily range of temperature during the summer is large, due to dry and clear conditions. This
environment allowed to design and build a zero energy concept building (a detached single family house) on the basis of passive
heating and cooling technologies, supported, when required, by short time active conditioning. The design process was optimized
by extensive energy simulations, resulting in an optimal energy balance and favorable thermal comfort conditions along the year.
The building is instrumented with an accurate building automation control system, and a number of sensors for a detailed energy
and environmental monitoring. The monitoring equipment and framework, have been devised to support further detailed studies
to improve the design concept and to provide accurate and comprehensive data to the scientific community.Causone, Francesco; Carlucci, Salvatore; Pagliano, Lorenzo; Pietrobon, MarcoCausone, Francesco; Carlucci, Salvatore; Pagliano, Lorenzo; Pietrobon, Marc
Assessing energy performance of smart cities
The massive urbanization process registered since 1950s and projected to continue for the coming decades is posing a crucial issue for the management of existing cities and the planning of future ones. Smart cities are often envisioned as ideal urban environments where the different dimensions of a city, such as economy, education, energy, environment, finance, etc., are managed in an effective and proactive way. Nevertheless, in order to reach this remarkable and challenging objective, analysis tools are required to create scenarios that are able to inform policy makersâ\u80\u99 decisions. Focusing on energy, this paper proposes an analysis method, based on exergy, to support smart city planning. It may help the decision makers to assess the energy-smartness of different scenarios, and to address urban energy policies. Possibilities and limitations of the analysis method are discussed via the application to the cities of London, Milan, and Lisbon that committed to become smart cities. Practical application: The paper summarizes a study on the possibilities and limitations of adopting an assessment technique, based on exergy, in order to evaluate the energy-smartness of policies in existing and future smart cities. As highlighted in the paper, buildingâ\u80\u99s energy uses have a huge share of many citiesâ\u80\u99 energy breakdown. Thus, professionals in the building industry will be interested in the paper not only because it refers to smart cities, but because the built environment plays a pivotal role in them. Professionals may also refer to this study to perform a similar analysis in other urban environments to support decision makers
Assessing gaps and needs for integrating building performance optimization tools in net zero energy buildings design
This paper summarizes a study undertaken to reveal potential challenges and opportunities for integrating optimization tools in net zero energy buildings (NZEB) design. The paper reviews current trends in simulation-based building performance optimization (BPO) and outlines major criteria for optimization tools selection and evaluation. This is based on analyzing user's needs for tools capabilities and requirement specifications. The review is carried out by means of a literature review of 165 publications and interviews with 28 optimization experts. The findings are based on an inter-group comparison between experts. The aim is to assess the gaps and needs for integrating BPO tools in NZEB design. The findings indicate a breakthrough in using evolutionary algorithms in solving highly constrained envelope, HVAC and renewable optimization problems. Simple genetic algorithm solved many design and operation problems and allowed measuring the improvement in the optimality of a solution against a base case. Evolutionary algorithms are also easily adapted to enable them to solve a particular optimization problem more effectively. However, existing limitations including model uncertainty, computation time, difficulty of use and steep learning curve. Some future directions anticipated or needed for improvement of current tools are presented.Peer reviewe
Energy retrofit of a day care center for current and future weather scenarios
Many scientific evidences have shown that Earth’s climate is rapidly changing. By 2050, European Union is aiming to
significantly reduce greenhouse gas emissions (GHG) in the building sector. Achieving this target might help the mitigation of
global warming, but the climate change seems inevitable. This means that both new and refurbished buildings should be able to
face those conditions that they are going to experience during their lifetime. Therefore, any building design should be checked
both for current and future climate scenarios. This study describes the use of a downscaling method named morphing to generate
future weather scenarios and intends to support the design process of a deep energy retrofit of a day care center in order to
improve the energy and thermal comfort performance of the building under the current and future weather scenarios. The retrofit
concept of the building also includes hybrid ventilation, automated solar shading, lighting controls and renewable energy
generation systems
Multi-objective optimization of a nearly zero-energy building based on thermal and visual discomfort minimization using a non-dominated sorting genetic algorithm (NSGA-II)
Multi-objective optimization methods provide a valid support to buildings' design. They aim at identifying the most promising building variants on the basis of diverse and potentially contrasting needs. However, optimization has been mainly used to optimize the energy performance of buildings, giving secondary importance to thermal comfort and usually neglecting visual comfort and the indoor air quality. The present study addresses the design of a detached net zero-energy house located in Southern Italy to minimize thermal and visual discomfort. The optimization problem admits four objective functions (thermal discomfort during winter and summer and visual discomfort due to glare and an inappropriate quantity of daylight) and uses the non-dominated sorting genetic algorithm, implemented in the GenOpt optimization engine through the Java genetic algorithms package, to instruct the EnergyPlus simulation engine. The simulation outcome is a four-dimensional solution set. The building variants of the Pareto frontier adopt diverse and non-intuitive design alternatives. To derive good design practices, two-dimensional projections of the solution set were also analyzed. Finally, in cases of complex optimization problems with many objective functions, optimization techniques are recommended to effectively explore the large number of available building variants in a relatively short time and, hence, identify viable non-intuitive solutions
Learning from the Past:The Impacts of Economic Crises on Energy Poverty Mortality and Rural Vulnerability
- …