75 research outputs found

    Spectrum Occupancy Measurements and Analysis in 2.4 GHz WLAN

    Get PDF
    High time resolution spectrum occupancy measurements and analysis are presented for 2.4 GHz WLAN signals. A custom-designed wideband sensing engine records the received power of signals, and its performance is presented to select the decision threshold required to define the channel state (busy/idle). Two sets of measurements are presented where data were collected using an omni-directional and directional antenna in an indoor environment. Statistics of the idle time windows in the 2.4 GHz WLAN are analyzed using a wider set of distributions, which require fewer parameters to compute and are more practical for implementation compared to the widely-used phase type or Gaussian mixture distributions. For the omni-directional antenna, it was found that the lognormal and gamma distributions can be used to model the behavior of the idle time windows under different network traffic loads. In addition, the measurements show that the low time resolution and angle of arrival affect the statistics of the idle time window

    Indoor-to-outdoor empirical path loss modelling for femtocell networks at 0.9, 2, 2.5 and 3.5 GHz using singular value decomposition

    Get PDF
    Two empirical indoor-to-outdoor path loss models to facilitate femtocell network deployment are derived from continuous wave power measurements. A large set of indoor-outdoor transmitter locations in two residential streets in an urban setting and operating at 900 MHz, 2 GHz, 2.5 GHz and 3.5 GHz have been used to derive the model parameters by using singular value decomposition (SVD). The path loss models have been compared and validated against existing models as well as independent measurement data and good comparison is shown. The root mean square error of the residual path loss data obtained from the measurement data, which directly relates to the channel shadowing characteristics, is compared and validated with known results and has led to new model parameters being proposed. The expressions derived from the modelling can be used in system-level simulators, as well as for shadowing interference analysis of two-tier heterogeneous networks operating in indoor-outdoor scenarios at or close to the operating frequencies considered. In this study, the models extend the operating frequency range compared to related models and introduce SVD as a convenient means of deriving parameters from measured path loss data

    Multi‐band millimetre wave indoor directional channel measurements and analysis for future wireless communication systems

    Get PDF
    Single‐input single‐output (SISO) three‐dimensional (3D) wideband indoor directional measurements collected in a factory environment and an office environment at 38 and 70 GHz are presented. 3D single‐input multiple‐output (SIMO) dual polarised measurements with 1 × 2 antenna configurations were also carried out in a meeting room, a conference room, and an office room at the 60 GHz band. The measurements cover both azimuth and elevation by rotating the directional antenna (RDA) at the receiver side. Different statistical channel parameters such as power delay profile, power angle profile, root‐mean‐square delay spread, angular spread, and path loss were estimated for different possible antenna orientations between the transmitter and the receiver, which include line‐of‐sight, obstructed line‐of‐sight, and non‐line‐of‐sight. The polarisation effects on path loss models and the delay and angular spread models based on the surface area of the environment are studied. The results will be valuable for the design of indoor millimetre wave cellular networks

    Collaborative Trajectory Planning and Resource Allocation for Multi-Target Tracking in Airborne Radar Networks under Spectral Coexistence

    Get PDF
    This paper develops a collaborative trajectory planning and resource allocation (CTPRA) strategy for multi-target tracking (MTT) in a spectral coexistence environment utilizing airborne radar networks. The key mechanism of the proposed strategy is to jointly design the flight trajectory and optimize the radar assignment, transmit power, dwell time, and signal effective bandwidth allocation of multiple airborne radars, aiming to enhance the MTT performance under the constraints of the tolerable threshold of interference energy, platform kinematic limitations, and given illumination resource budgets. The closed-form expression for the Bayesian CramĂ©r–Rao lower bound (BCRLB) under the consideration of spectral coexistence is calculated and adopted as the optimization criterion of the CTPRA strategy. It is shown that the formulated CTPRA problem is a mixed-integer programming, non-linear, non-convex optimization model owing to its highly coupled Boolean and continuous parameters. By incorporating semi-definite programming (SDP), particle swarm optimization (PSO), and the cyclic minimization technique, an iterative four-stage solution methodology is proposed to tackle the formulated optimization problem efficiently. The numerical results validate the effectiveness and the MTT performance improvement of the proposed CTPRA strategy in comparison with other benchmarks

    Joint Route Optimization and Multidimensional Resource Management Scheme for Airborne Radar Network in Target Tracking Application

    Get PDF
    In this article, we investigate the problem of joint route optimization and multidimensional resource management (JRO-MDRM) for an airborne radar network in target tracking application. The mechanism of the proposed JRO-MDRM scheme is to adopt the optimization technique to collaboratively design the flight route, transmit power, dwell time, waveform bandwidth, and pulselength of each airborne radar node subject to the system kinematic limitations and several resource budgets, with the aim of simultaneously enhancing the target tracking accuracy and low probability of intercept (LPI) performance of the overall system. The predicted Bayesian CramĂ©r–Rao lower bound and the probability of intercept are calculated and employed as the metrics to gauge the target tracking performance and LPI performance, respectively. It is shown that the resulting optimization problem is nonlinear and nonconvex, and the corresponding working parameters are coupled in both objective functions, which is generally intractable. By incorporating the particle swarm optimization and cyclic minimization approaches, an efficient four-step solution algorithm is proposed to deal with the above problem. Extensive numerical results are provided to demonstrate the correctness and advantages of our developed scheme compared with other existing benchmarks

    Evaluation of LVRT capability and stability analysis of VSC based advanced control approach for grid connected PV system under grid fault conditions

    Get PDF
    Short circuit faults are a prevalent issue in power systems, causing disruptions to the grid's normal operation. Dynamic behaviours of the conventional power systems during short circuit faults have been extensively studied and understood. The bulk of ongoing research and development are focusing on the dynamic performance of grid-connected renewable energy systems under these fault conditions, due to changes in the grid code and a decrease in system inertia. The development of effective control strategies to enhance the system's reliability during fault conditions is of paramount importance. In this paper, a two-stages grid-connected photovoltaic system (GCPV) having a rated power of 2 MW was created in the MATLAB/Simulink environment. The dynamic behaviour of the presented system was evaluated in two scenarios: steady state conditions and short circuit faults. A line-to-ground short circuit fault was created at the grid side, and its effect on the PV system's operation was observed. An advanced control system was designed to maintain stability during fault conditions. The results demonstrated the efficiency of the designated control system in minimizing the effects of short circuit faults on the GCPV system's function, and restoring the system promptly after the fault was cleared. Furthermore, considering modifications in grid regulations, the low voltage ride through (LVRT) capability of the designed system was analysed and validated according to the UK standards. The Total Harmonic Distortion (THD) level at the common coupling point was also analysed for voltage and current, remaining below the acceptable level of 5% as specified in the IEEE Std. 519

    Rain Statistics Investigation and Rain Attenuation Modeling for Millimeter Wave Short-range Fixed Links

    Get PDF
    Millimeter wave (mmWave) communication is a key technology for fifth generation (5G) and beyond communication networks. However, the communication quality of the radio link can be largely affected by rain attenuation, which should be carefully taken into consideration when calculating the link budget. In this paper, we present results of weather data collected with a PWS100 disdrometer and mmWave channel measurements at 25.84 GHz (K band) and 77.52 GHz (E band) using a custom-designed channel sounder. The rain statistics, including rain intensity, rain events, and rain drop size distribution (DSD) are investigated for one year. The rain attenuation is predicted using the DSD model with Mie scattering and from the model in ITU-R P.838-3. The distance factor in ITU-R P.530-17 is found to be inappropriate for a short-range link. The wet antenna effect is investigated and additional protection of the antenna radomes is demonstrated to reduce the wet antenna effect on the measured attenuation

    Joint Transmit Resource Management and Waveform Selection Strategy for Target Tracking in Distributed Phased Array Radar Network

    Get PDF
    In this paper, a joint transmit resource management and waveform selection (JTRMWS) strategy is put forward for target tracking in distributed phased array radar network. We establish the problem of joint transmit resource and waveform optimization as a dual-objective optimization model. The key idea of the proposed JTRMWS scheme is to utilize the optimization technique to collaboratively coordinate the transmit power, dwell time, waveform bandwidth, and pulse length of each radar node in order to improve the target tracking accuracy and low probability of intercept (LPI) performance of distributed phased array radar network, subject to the illumination resource budgets and waveform library limitation. The analytical expressions for the predicted Bayesian Cram\'{e}r-Rao lower bound (BCRLB) and the probability of intercept are calculated and subsequently adopted as the metric functions to evaluate the target tracking accuracy and LPI performance, respectively. It is shown that the JTRMWS problem is a non-linear and non-convex optimization problem, where the above four adaptable parameters are all coupled in the objective functions and constraints. Combined with the particle swarm optimization (PSO) algorithm, an efficient and fast three-stage-based solution technique is developed to deal with the resulting problem. Simulation results are provided to verify the effectiveness and superiority of the proposed JTRMWS algorithm compared with other state-of-the-art benchmarks
    • 

    corecore