Potential trade-offs between nature-based tourism and forestry, a case study in Northern Finland

Forestry, as a large industry, has significant impacts on the quality of nature-based tourism landscapes in boreal forests. In Finland, the rapid growth of nature-based tourism has expanded outdoor recreation activities from protected areas into timber production forests; this is particularly so in northern Finland. This paper focuses on assessing balanced local net impacts of three alternative land-use scenarios, in which the level of integration between nature-based tourism (NBT) and traditional forestry is varied. The study is located in northern Finland in the area between two top-rated tourist resorts, Ylläs and Levi. The results of the case study support the idea of an eligible integration between NBT and forestry, which takes into account scenic qualities of forested landscapes by restricting traditional management practices. In our case, the increased number of tourists (due to a more attractive forest environment) offset the losses accrued in forestry (due to restricted forest management)

Travertine precipitation in the Paleoproterozoic Kuetsjärvi Sedimentary Formation, Pechenga Greenstone Belt, NE Fennoscandian Shield

PES was supported by Väisälä Foundation (Finnish Academy of Science and Letters) and the Finnish Doctoral Program in Geology. ATB was supported by NERC grant NE/G00398X/1. VAM was supported by NFR grant 191530/V30 (projects 331000 and 802795). This is a contribution (paper) # 18 to the ICDP FAR-DEEP project.Peer reviewedPublisher PD

High efficacy and low toxicity of weekly docetaxel given as first-line treatment for metastatic breast cancer

Background: Docetaxel is one of the most effective antitumor agents currently available for the treatment of metastatic breast cancer (MBC). This phase II multicenter study prospectively analyzed the efficacy and toxicity of docetaxel given on a weekly schedule as first-line treatment of metastatic breast cancer. Patients and Methods: All patients received docetaxel, 35 mg/m(2) weekly for 6 weeks, followed by 2 weeks of rest. Subsequent cycles ( 3 weeks of treatment, 2 weeks of rest) were given until a maximum of 5 cycles or disease progression. Premedication consisted of 8 mg dexamethasone intravenously 30 min prior to the infusion of docetaxel. Results: Fifty-four patients at a median age of 58 years with previously untreated MBC were included in the study. A median of 10 doses ( median cumulative dose 339 mg/m(2)) was administered ( range: 2 - 18). The overall response rate was 48.1% ( 95% CI: 34 - 61%, intent-to-treat). Median survival was 15.8 months and median time to progression was 5.9 months ( intent-to-treat). Hematological toxicity was mild with absence of neutropenia-related complications. Grade 3 neutropenia was observed in 3.7% of patients and grade 3 and 4 anemia was observed in 5.6 and 1.9% of patients, respectively. Conclusion: The weekly administration of docetaxel is highly efficient and safe as first-line treatment for MBC and may serve as an important treatment option specifically in elderly patients and patients with a reduced performance status. Copyright (C) 2005 S. Karger AG, Basel

Survival Probability of a Ballistic Tracer Particle in the Presence of Diffusing Traps

We calculate the survival probability P_S(t) up to time t of a tracer particle moving along a deterministic trajectory in a continuous d-dimensional space in the presence of diffusing but mutually noninteracting traps. In particular, for a tracer particle moving ballistically with a constant velocity c, we obtain an exact expression for P_S(t), valid for all t, for d<2. For d \geq 2, we obtain the leading asymptotic behavior of P_S(t) for large t. In all cases, P_S(t) decays exponentially for large t, P_S(t) \sim \exp(-\theta t). We provide an explicit exact expression for the exponent \theta in dimensions d \leq 2, and for the physically relevant case, d=3, as a function of the system parameters.Comment: RevTeX, 4 page

Mechanical properties and microstructure of additively manufactured stainless steel with laser welded joints

Powder bed fusion (PBF) is a commonly employed metal additive manufacturing (AM) process in which components are built, layer-by-layer, using metallic powder. The component size is limited by the internal build volume of the employed PBF AM equipment; the fabrication of components larger than this volume therefore requires mechanical joining methods, such as laser welding. There are, however, very limited test data on the mechanical performance of PBF metal with laser welded joints. In this study, the mechanical properties of PBF built 316L stainless steel parts, joined together using laser welding to form larger components, have been investigated; the microstructure of the components has also been examined. 33 PBF 316L stainless steel tensile coupons, with central laser welds, welded using a range of welding parameters, and with coupon half parts built in two different orientations, were tested. The porosity, microhardness and microstructure of the welded coupons, along with the widths of the weld and heat-affected zone (HAZ), were characterised. The PBF base metal exhibited a typical cellular microstructure, while the weld consisted of equiaxed, columnar and cellular dendrite microstructures. Narrow weld regions and HAZs were observed. The PBF base metal was found to have higher proof and ultimate strengths, but a similar fracture strain and a lower Young’s modulus, compared with conventionally manufactured 316L stainless steel. The strengths were dependent on the build direction – the vertically built specimens showed lower proof strengths than the horizontal specimens. The laser welds generally exhibited lower microhardness, proof strengths and fracture strains than the PBF base metal which correlated with the observed structure. This work has demonstrated that PBF built parts can be joined by laser welding to form larger components and provided insight into the resulting strength and ductility

Norovirus genotypes in endemic acute gastroenteritis of infants and children in Finland between 1994 and 2007

Noroviruses are, after rotaviruses, the second most common causative agents of acute gastroenteritis in young children. We studied norovirus genotypes in faecal specimens collected from Finnish children followed-up prospectively in rotavirus vaccine trials. Almost 5000 faecal specimens collected from cases of acute gastroenteritis were examined using reverse transcriptase–PCR. A total of 1172 cases (25% of all acute gastroenteritis) were associated with noroviruses. Of these, 96% were genogroup GII. GII.4 was the most common genotype (46%) throughout the study period but the proportion of this genotype varied in different norovirus epidemic seasons. Additional norovirus genotypes detected were: GII.7 (15%), GII.3 (14%), GII.1 (9%), GII.b (7%), GII.2 (3%), and GI.3 (2%). GII.4 dominated during the following years: 1998–1999 (75%), 2002–2003 (88%) and 2006–2007 (98%) while recombinant genotype GII.b was dominant between 2003 and 2004 (83%). In conclusion, genotypes GII.4 and GIIb have emerged as predominant norovirus genotypes in endemic gastroenteritis affecting young infants and children in Finland

Long-Term Survival and Quality of Life After Hypothermic Circulatory Arrest in Aortic Surgery

Background and Aims: Hypothermic circulatory arrest carries a high risk of mortality and neurological complications. An important part of assessing surgical treatment is the evaluation of long-term survival and postoperative health-related quality of life. Material and Methods: In this prospective study, 30 patients undergoing hypothermic circulatory arrest during surgery of the thoracic aorta, and 31 comparison patients undergoing elective coronary artery surgery without hypothermic circulatory arrest were evaluated for long-term survival and health-related quality of life, using the RAND 36-Item Health Survey questionnaire. The results were compared to national age- and sex-matched reference populations of the chronically ill and healthy adults. Results: After 4.6-8.0 years, available study (88%) and comparison (59%) patients were interviewed. The life expectancy was similar with 4- and 8-year survival of 90%, and 87% for the study group, and 94%, and 94% for the comparison group, respectively (log rank test, p = 0.62). The RAND-36 scores for study and comparison groups were congruent in all dimensions, describing physical, mental, and social domains. The study patients' health-related quality of life results were similar to the national reference population with chronic illnesses. Conclusion: After hypothermic circulatory arrest, patients undergoing surgery of the thoracic aorta achieve a similar long-term life expectancy and health-related quality of life as do patients undergoing coronary surgery without hypothermic circulatory arrest, and a health-related quality of life similar to the national reference population with chronic illnesses. These results justify operative treatment in this high-risk patient population.Peer reviewe