Comparison of two glutathione S-transferases used in capacitive biosensors for detection of heavy metals

This work describes the development of a heavy-metal biosensor based on either recombinant 6His-Tag glutathione S-transferase (GST-(His)(6)) or glutathione S-transferase Theta 2-2 (GST-theta 2-2), and a capacitive transducer. The dynamic range of the pure bovine liver GST-Theta 2-2 biosensor was 1 fM to 1mM for Zn2+, and 10pM to 1mM for Cd2+. The GST-(His) 6 biosensor was able to detect Zn2+ and Cd2+ in the range of 1 fM to 10 mu M, and Hg2+ in the range of 1 fM to 10mM. The bovine liver GST Theta 2-2 biosensor displays an increased selectivity and a wider dynamic range for Zn2+ compared with the GST-(His) 6 biosensor. Therefore, by using different GST isozymes, it is possible to modulate important characteristics of capacitive biosensors for the detection of heavy metals

Label free capacitive immunosensor for detecting calpastatin - A meat tenderness biomarker.

An immunological capacitive biosensor for calpastatin was developed, optimized and applied for the analysis of meat extract samples. Anti-calpastatin antibody was immobilized on a gold electrode modified with a self-assembled monolayer of mercaptoundecanoic acid and Protein A from Staphylococcus aureus, and the obtained immunosensor was inserted as the working electrode in an electrochemical cell of a flow injection system. The dynamic range of the sensor was 20 to 160 ng/mL calpastatin. The electrode could be regenerated and re-used for more than 7 days with minimal reduction in sensitivity. For the analysis of real samples, the target analyte was extracted from the Longissimus dorsi muscle from beef carcasses directly after slaughtering. The extract was analyzed both with the developed immunosensor and microtiter plate ELISA, and a good correlation was obtained. However the immunosensor offers advantages of speed, simplicity, sensitivity and possibility for miniaturization over conventional assays for calpastatin quantification

Indirect, non-competitive amperometric immunoassay for accurate quantification of calpastatin, a meat tenderness marker, in bovine muscle

A method is described for quantification of the beef tenderness marker, calpastatin, in meat samples by amperometric detection. Using a novel bovine recombinant partial calpastatin protein as standard antigen a low detection limit of 0.2 ng/mL was achieved. The influence of the complex matrix was minimised by heat pretreatment and dilution of the samples prior to detection of calpastatin. The relative error between the direct sample measurement and standard addition methods was 5.89%, confirming the accuracy of the developed amperometric immunoassay. (C) 2012 Elsevier Ltd. All rights reserved

Comparison of a novel antigen detection test with reverse transcription polymerase chain reaction assay for laboratory diagnosis of SARS-CoV-2 infection

Molecular diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by real-time reverse transcription polymerase chain reaction (RT-PCR) in respiratory specimens is considered the gold standard method. This method is highly sensitive and specific but it has some limitations such as being expensive and requiring special laboratory equipment and skilled personnel. RapidFor (TM) Antigen Rapid Test Kit is a commercially available Ag-RDT which is produced in Turkey and designed to detect the nucleocapsid antigen of SARS-CoV-2 in nasopharyngeal swab samples. The aim of this study was to evaluate the performance of this novel SARS-CoV-2 antigen detection considering the RT-PCR method as the gold standard. Four hundred forty-four nasopharyngeal swab samples which were collected from the patients who met clinical criteria of COVID-19 from ten centers in Turkey between September 2020 and February 2021 were included in the study. All the nasopharyngeal swab samples were tested for SARS-CoV-2 RNA using commercial RT-PCR kits (Bioeksen and A1 Lifesciences, Istanbul, Turkey) according to the manufacturer's instructions. Viral loads were assessed according to the cycle threshold (Ct) values. RapidFor (TM) SARS-CoV-2 antigen test (Vitrosens Biotechnology, Istanbul, Turkey) was used to investigate the presence of SARS-CoV-2 antigen in all samples following the manufacturer's instructions. Out of 444 nasopharyngeal swab samples tested, 346 (77.9%) were positive and 98 (22.1%) were negative for SARS-CoV-2 RNA by RTPCR. Overall sensitivity of the RapidFor (TM). Antigen Rapid Test Kit was 80.3% whereas specificity was found to be 87.8%. Positivity rate of rapid antigen test in samples with Ct values over 25 and below 30 was 82.7%, while it increased to 95.7% in samples 20 <= Ct < 25 and reached 100% in samples with Ct values below 20. RapidFor (TM) SARS-CoV-2 Ag test might be a good choice in the screening of symptomatic and asymptomatic patients and their contacts for taking isolation measures early, with advantages over RT-PCR as being rapid, easy and being applicable in every laboratory and even at point of care