14 research outputs found
The implementation of the Eurocodes in the National Regulatory Framework
The report provides general information on the concept of the Eurocodes implementation in the regulatory system and discusses case studies of EU Member States that have successfully implemented the Eurocodes in the national regulatory system. It also highlights the experience of designers on using the Eurocodes by presenting simple application examples. Moreover, the state of the Eurocodes implementation in the non-EU Balkan countries is presented, based on the information exchanged and collected during the workshop “The way forward for the Eurocodes implementation in the Balkans” (10-11 October 2018 in Tirana, Albania), along with the activities of the Engineering Chambers in support of the Eurocodes implementation. The way towards the publication of the Second Generation of the Eurocodes, expected after 2021, is also discussed.JRC.E.4-Safety and Security of Building
SELF-CONSISTENT MODEL FOR THE BRITTLE RESPONSE OF SOLIDS.
SELF-CONSISTENT MODEL FOR THE BRITTLE RESPONSE OF SOLIDS
Preisach Elasto-Plastic Model for Mild Steel Hysteretic Behavior-Experimental and Theoretical Considerations
The Preisach model already successfully implemented for axial and bending cyclic loading is applied for modeling of the plateau problem for mild steel. It is shown that after the first cycle plateau disappears an extension of the existing Preisach model is needed. Heat dissipation and locked-in energy is calculated due to plastic deformation using the Preisach model. Theoretical results are verified by experiments performed on mild steel S275. The comparison of theoretical and experimental results is evident, showing the capability of the Presicah model in predicting behavior of structures under cyclic loading in the elastoplastic region. The purpose of this paper is to establish a theoretical background for embedded sensors like regenerated fiber Bragg gratings (RFBG) for measurement of strains and temperature in real structures. In addition, the present paper brings a theoretical base for application of nested split-ring resonator (NSRR) probes in measurements of plastic strain in real structures
Investigation of Time-Varying Cable Tension of Bridges Using Time-Frequency Reassignment Techniques Based on Structural Health Monitoring Data
Cables have been increasingly utilized in modern long-span or tied-arch bridges as the main bearing structures. Real-time identification of time-varying cable tension is essential for assessing the service performance of bridges. Vibration-based methods have been an increasing research focus in recent decades. However, a long time interval is needed to estimate structural frequency using vibration-based methods, increasing the calculating time of cable tension. The time-varying cable tension is thus difficult to extract. This study proposes a time-frequency reassignment-based algorithm to reduce the detection time to address this issue. Combined with a time-frequency analysis tool and vibration theory of cables, the algorithm can identify the time-varying frequency and further quickly calculate the time-varying cable tension within 12.8 s. The features of the proposed algorithm are mainly threefold: identifying the time-varying frequencies with high precision; without some prior knowledge of vibration; having no other requirements for sensor modes. Moreover, the experimental validation is conducted using a quasi-static loading in a workshop and a dynamic field test on Sutong Bridge, respectively. The results show that the proposed algorithm can be used to identify time-varying tension and assess the service performance of cables, providing a new path for real-time condition monitoring of bridges in service
Investigation of Time-Varying Cable Tension of Bridges Using Time-Frequency Reassignment Techniques Based on Structural Health Monitoring Data
Cables have been increasingly utilized in modern long-span or tied-arch bridges as the main bearing structures. Real-time identification of time-varying cable tension is essential for assessing the service performance of bridges. Vibration-based methods have been an increasing research focus in recent decades. However, a long time interval is needed to estimate structural frequency using vibration-based methods, increasing the calculating time of cable tension. The time-varying cable tension is thus difficult to extract. This study proposes a time-frequency reassignment-based algorithm to reduce the detection time to address this issue. Combined with a time-frequency analysis tool and vibration theory of cables, the algorithm can identify the time-varying frequency and further quickly calculate the time-varying cable tension within 12.8 s. The features of the proposed algorithm are mainly threefold: identifying the time-varying frequencies with high precision; without some prior knowledge of vibration; having no other requirements for sensor modes. Moreover, the experimental validation is conducted using a quasi-static loading in a workshop and a dynamic field test on Sutong Bridge, respectively. The results show that the proposed algorithm can be used to identify time-varying tension and assess the service performance of cables, providing a new path for real-time condition monitoring of bridges in service
Frequency Contour-Strip Method for Characterization of Damage in Structures under Noisy Conditions
Eigen-frequency, compared with mode shape and damping, is a more practical and reliable dynamic feature to portray structural damage. The frequency contour-line method relying on this feature is a representative method to identify damage in beam-type structures. Although this method has been increasingly applied in the area of damage identification, it has two significant deficiencies: inefficiency in establishing the eigen-frequency panorama; and incompetence to identify cracks in noisy conditions, considerably impairing the effectiveness in identifying structural damage. To overcome these deficiencies, a novel method, termed the frequency contour-strip method, is developed for the first time. This method is derived by extending the frequency contour line of 1D to frequency contour strip of 2D. The advantages of the frequency contour-strip method are twofold: (i) it uses the isosurface function to instantly produce the eigen-frequency panorama with a computational efficiency several orders of magnitude higher than that of the frequency contour-line method; and (ii) it can accommodate the effect of random noise on damage identification, thereby thoroughly overcoming the deficiencies of the frequency contour-line method. With these merits, the frequency contour-strip method can characterize damage in beam-type structures with more efficiency, greater accuracy, and stronger robustness against noise. The proof of concept of the proposed method is performed on an analytical model of a Timoshenko beam bearing a crack and the effectiveness of the method is experimentally validated via crack identification in a steel beam
Modal analysis and vibration control of a vertical cable with dual tuned mass dampers
This paper proposes a vibration model for modal analysis and vibration control of a vertical cable-dual tuned mass damper (C-DTMD) coupled system. The proposed model introduces several non-dimensional parameters to describe the in-plane vibration of the coupled system. Moreover, the phenomenon of modal split is comprehensively studied to present the complex vibration modes. Parameter analysis is conducted to show the influence of length ratio, mass ratio, damping ratio, and frequency ratio on vibration reduction. In addition, the theoretical model is verified using finite element methods. A practical vertical cable in Jiangyin Bridge with designed wind loads is chosen as a numerical example. The results show that DTMD devices can effectively reduce the modal vibration and have great potential for multi-mode vibration control of vertical cables in suspension bridges. The proposed model can accurately describe the in-plane vibration modes of C-DTMD systems and provides a basis for the optimal design of damper parameters
Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack
A breathing crack is a typical form of structural damage attributed to long-term dynamic loads acting on engineering structures. Traditional linear damage identification methods suffer from the loss of valuable information when structural responses are essentially non-linear. To deal with this issue, bispectrum analysis is employed to study the non-linear dynamic characteristics of a beam structure containing a breathing crack, from the perspective of numerical simulation and experimental validation. A finite element model of a cantilever beam is built with contact elements to simulate a breathing crack. The effects of crack depth and location, excitation frequency and magnitude, and measurement noise on the non-linear behavior of the beam are studied systematically. The result demonstrates that bispectral analysis can effectively identify non-linear damage in different states with strong noise immunity. Compared with existing methods, the bispectral non-linear analysis can efficiently extract non-linear features of a breathing crack, and it can overcome the limitations of existing linear damage detection methods used for non-linear damage detection. This study’s outcome provides a theoretical basis and a paradigm for damage identification in cracked structures