A Classroom Demonstration of Levitation and Suspension of a Superconductor over a Magnetic Track

The suspension and levitation of superconductors by permanent magnets is one of the most fascinating consequences of superconductivity, and a wonderful instrument for generating interest in low temperature physics and electrodynamics. We present a novel classroom demonstration of the levitation/suspension of a superconductor over a magnetic track that maximizes levitation/suspension time, separation distance between the magnetic track and superconductor and also insulator aesthetics. The demonstration as described is both inexpensive and easy to construct.Comment: 5 page

Comparative study of the effects of electron irradiation and natural disorder in single crystals of SrFe2_{2}(As1−x_{1-x}Px_x)2_2 (x=x=0.35) superconductor

London penetration depth, $\lambda(T)$, was measured in single crystals of SrFe$_2$(As$_{1-x}$P$_x$)$_2$ ($x=$0.35) iron - based superconductor. The influence of disorder on the transition temperature, $T_c$, and on $\lambda(T)$ was investigated. The effects of scattering controlled by the annealing of as-grown crystals was compared with the effects of artificial disorder introduced by 2.5~MeV electron irradiation. The low temperature behavior of $\lambda(T)$ can be described by a power-law function, $\Delta \lambda (T)=AT^n$, with the exponent $n$ close to one in pristine annealed samples, as expected for superconducting gap with line nodes. Upon $1.2 \times 10^{19}$ \ecm irradiation, the exponent $n$ increases rapidly exceeding a dirty limit value of $n=$ 2 implying that the nodes in the superconducting gap are accidental and can be lifted by the disorder. The variation of the exponent $n$ with $T_c$ is much stronger in the irradiated crystals compared to the crystals in which disorder was controlled by the annealing of the growth defects. We discuss the results in terms of different influence of different types of disorder on intra- and inter- band scattering

Low temperature acoustic properties of amorphous silica and the Tunneling Model

Internal friction and speed of sound of a-SiO(2) was measured above 6 mK using a torsional oscillator at 90 kHz, controlling for thermal decoupling, non-linear effects, and clamping losses. Strain amplitudes e(A) = 10^{-8} mark the transition between the linear and non-linear regime. In the linear regime, excellent agreement with the Tunneling Model was observed for both the internal friction and speed of sound, with a cut-off energy of E(min) = 6.6 mK. In the non-linear regime, two different behaviors were observed. Above 10 mK the behavior was typical for non-linear harmonic oscillators, while below 10 mK a different behavior was found. Its origin is not understood.Comment: 1 tex file, 6 figure

Linear stability of planar premixed flames: reactive Navier-Stokes equations with finite activation energy and arbitrary Lewis number

A numerical shooting method for performing linear stability analyses of travelling waves is described and applied to the problem of freely propagating planar premixed flames. Previous linear stability analyses of premixed flames either employ high activation temperature asymptotics or have been performed numerically with finite activation temperature, but either for unit Lewis numbers (which ignores thermal-diffusive effects) or in the limit of small heat release (which ignores hydrodynamic effects). In this paper the full reactive Navier-Stokes equations are used with arbitrary values of the parameters (activation temperature, Lewis number, heat of reaction, Prandtl number), for which both thermal-diffusive and hydrodynamic effects on the instability, and their interactions, are taken into account. Comparisons are made with previous asymptotic and numerical results. For Lewis numbers very close to or above unity, for which hydrodynamic effects caused by thermal expansion are the dominant destablizing mechanism, it is shown that slowly varying flame analyses give qualitatively good but quantitatively poor predictions, and also that the stability is insensitive to the activation temperature. However, for Lewis numbers sufficiently below unity for which thermal-diffusive effects play a major role, the stability of the flame becomes very sensitive to the activation temperature. Indeed, unphysically high activation temperatures are required for the high activation temperature analysis to give quantitatively good predictions at such low Lewis numbers. It is also shown that state-insensitive viscosity has a small destabilizing effect on the cellular instability at low Lewis numbers

Electrothermal Icing Protection of Aerosurfaces Using Conductive Polymer Nanocomposites

Ice protection systems (IPS) are critical components for many aerospace flight vehicles, including commercial transports and unmanned aerial systems (UAS), and can include anti-icing, de-icing, ice sensing, etc. Here, an IPS is created using nanomaterials to create a surface-modified external layer on an aerosurface based on observations that polymer nanocomposites have tailorable and attractive heating properties. The IPS uses Joule heating of aligned carbon nanotube (CNT) arrays to create highly efficient de-icing and anti-icing of aerosurfaces. An ice wind tunnel test of a CNT enhanced aerosurface is performed to demonstrate the system under a range of operating regimes (temperature, wind speed, water content in air) including operation down to -20.6°C (-5°F) at 55.9 m/s (125 mph) under heavy icing. Manufacturing, design considerations, and further improvements to the materials and systems are discussed.United States. Dept. of the Navy. Small Business Innovation Research (Contract N68335-11-C-0424)National Science Foundation (U.S.). Materials Research Science and Engineering Centers (Program) (Grant DMR-0819762

Kinetic detection of osmium(VI) ester intermediates during the OsO4‐mediated aqueous dihydroxylation of chloroethylenes

The kinetics and mechanism of the cis dihydroxylation of cis‐1,2‐ dichloroethylene, trans‐1,2‐dichloroethylene, and trichloroethylene by osmium tetroxide was studied systematically in aqueous solution. The stoichiometry of the process was determined based on the principle of continuous variation of reactant ratios with spectrophotometric detection. The results always showed 1:1 stoichiometry, which is in agreement with dihydroxylation. All three reactions were found to proceed in two distinct steps. The first step occurred on a time scale of seconds and was associated with a minor change in absorbance and was identified as the formation of a 1:1 adduct between the two reagents, which is the osmium(VI) ester that plays a decisive role in catalytic applications. This species is formed in an equilibrium that is very much shifted toward the reactants, so the osmium(VI) complex is a short‐lived intermediate of the process, which is detected kinetically, but its concentration is never high enough for structural characterization. The second reaction is accompanied by major spectral changes; it involves the formation of the final products. Our results clearly show that it is possible to detect the intermediate of the process by careful kinetic studies. It is also possible that the same strategy might be successful in other OsO4‐dependent dihydroxylation processes

The influence of anesthetics, neurotransmitters and antibiotics on the relaxation processes in lipid membranes

In the proximity of melting transitions of artificial and biological membranes fluctuations in enthalpy, area, volume and concentration are enhanced. This results in domain formation, changes of the elastic constants, changes in permeability and slowing down of relaxation processes. In this study we used pressure perturbation calorimetry to investigate the relaxation time scale after a jump into the melting transition regime of artificial lipid membranes. This time corresponds to the characteristic rate of domain growth. The studies were performed on single-component large unilamellar and multilamellar vesicle systems with and without the addition of small molecules such as general anesthetics, neurotransmitters and antibiotics. These drugs interact with membranes and affect melting points and profiles. In all systems we found that heat capacity and relaxation times are related to each other in a simple manner. The maximum relaxation time depends on the cooperativity of the heat capacity profile and decreases with a broadening of the transition. For this reason the influence of a drug on the time scale of domain formation processes can be understood on the basis of their influence on the heat capacity profile. This allows estimations of the time scale of domain formation processes in biological membranes.Comment: 12 pages, 6 figure