A simple and effective geometric representation for irregular porous structure modeling

Computer-aided design of porous structures is a challenging task because of the high degree of irregularity and intricacy associated with the geometries. Most of the existing design approaches either target designing artifacts with regular-shaped pores or reconstructing geometric models from existing porous objects. For regular porous structures, it is difficult to control the pore shapes and distributions locally; for reconstructed models, a design is attainable only if there are some existing objects to reconstruct from. This paper is motivated to present an alternative approach to design irregular porous artifacts with controllable pore shapes and distributions, yet without requiring any existing objects as prerequisites. Inspired by the random colloid-aggregation model which explains the formation mechanism of random porous media, Voronoi tessellation is first generated to partition the space into a collection of compartments. Selective compartments are then merged together to imitate the random colloid aggregations. Through this Voronoi cell merging, irregular convex and concave polygons are obtained and the vertices of which are modeled as control points of closed B-Spline curves. The fitted B-Spline curves are then employed to represent the boundaries of the irregular-shaped pores. The proposed approach drastically improved the ease of irregular porous structure modeling while at the same time properly maintained the irregularity that is widely found in natural objects. Compared with other existing CAD approaches, the proposed approach can easily construct irregular porous structures which appear more natural and realistic. © 2010 Elsevier Ltd. All rights reserved.postprin

Slicing and contours generation for fabricating heterogeneous objects

A contour sub-division algorithm on each layer arising from slicing a heterogeneous object is proposed. Within each slice, the material grading is decomposed into subcontours according to the different grading variation. A parameter called 'grading step-width' is defined to control the number of sub-contours and resolution of the grading. With such discretization, it is, therefore, possible to build a heterogeneous object on layered manufacturing machines of different fabricating precision specification.published_or_final_versio

Adaptive meshing for finite element analysis of heterogeneous materials

postprin

Quadtree based mouse trajectory analysis for efficacy evaluation of voice-enabled CAD

Voice-enabled applications have caught considerable research interest in recent years. It is generally believed that voice based interactions can improve the working efficiencies and the overall productivities. Quantitative evaluations on the performance boost by using such Human-Computer interactions (HCI) are therefore necessary to justify the claimed efficacies and the usefulness of the HCI system. In this paper, a quadtree based approach is proposed to analyze the mouse movement distributions in the proposed Voice-enabled Computer-Aided Design (VeCAD) system. The mouse tracker keeps a record of all the mouse movement during the solid modeling process, and a quadtree based approach is applied to analyze the mouse trajectory distributions in both the traditional CAD and the VeCAD system. Our experiments show that the mouse movement is significantly reduced when voice is used to activate CAD modeling commands. ©2009 IEEE.published_or_final_versionThe IEEE International Conference on Virtual Environments, Human-Computer Interfaces, and Measurements Systems (VECIMS) 2009, Hong Kong, 11-13 May 2009. In Conference Proceedings, 2009, p. 196-20

Liquid-Crystal Thermosets, a New Generation of High-Performance Liquid-Crystal Polymers

One of the major challenges for NASA's next-generation reusable-launch-vehicle (RLV) program is the design of a cryogenic lightweight composite fuel tank. Potential matrix resin systems need to exhibit a low coefficient of thermal expansion (CTE), good mechanical strength, and excellent barrier properties at cryogenic temperatures under load. In addition, the resin system needs to be processable by a variety of non-autoclavable techniques, such as vacuum-bag curing, resin-transfer molding (RTM), vacuum-assisted resin-transfer molding (VaRTM), resin-film infusion (RFI), pultrusion, and advanced tow placement (ATP). To meet these requirements, the Advanced Materials and Processing Branch (AMPB) at NASA Langley Research Center developed a new family of wholly aromatic liquid-crystal oligomers that can be processed and thermally cross-linked while maintaining their liquid-crystal order. All the monomers were polymerized in the presence of a cross-linkable unit by use of an environmentally benign melt-condensation technique. This method does not require hazardous solvents, and the only side product is acetic acid. The final product can be obtained as a powder or granulate and has an infinite shelf life. The obtained oligomers melt into a nematic phase and do not exhibit isotropization temperatures greater than the temperatures of decomposition (Ti > T(sub dec)). Three aromatic formulations were designed and tested and included esters, ester-amides, and ester-imides. One of the major advantages of this invention, named LaRC-LCR or Langley Research Center-Liquid Crystal Resin, is the ability to control a variety of resin characteristics, such as melting temperature, viscosity, and the cross-link density of the final part. Depending on the formulation, oligomers can be prepared with melt viscosities in the range of 10-10,000 poise (100 rad/s), which can easily be melt-processed using a variety of composite-processing techniques. This capability provides NASA with custom-made matrix resins that meet the required processing conditions for the fabrication of textile composites. Once the resin is in place, the temperature is raised to 375 C and the oligomers are cross-linked into a high-glass-transition-temperature (Tg) nematic network without releasing volatiles. The mechanical properties of the fully crosslinked, composite articles are comparable to typical composites based on commercially available epoxy resins

Endoscopic biliary drainage for severe acute cholangitis

Background. Emergency surgery for patients with severe acute cholangitis due to choledocholithiasis is associated with substantial morbidity and mortality. Because recent results suggested that emergency endoscopic drainage could improve the outcome of such patients, we undertook a prospective study to determine the role of this procedure as initial treatment. Methods. During a 43-month period, 82 patients with severe acute cholangitis due to choledocholithiasis were randomly assigned to undergo surgical decompression of the biliary tract (41 patients) or endoscopic biliary drainage (41 patients), followed by definitive treatment. Hospital mortality was analyzed with respect to the use of endoscopic biliary drainage and other clinical and laboratory findings. Prognostic determinants were studied by linear discriminant analysis. Results. Complications related to biliary tract decompression and subsequent definitive treatment developed in 14 patients treated with endoscopic biliary drainage and 27 treated with surgery (34 vs. 66 percent, P>0.05). The time required for normalization of temperature and stabilization of blood pressure was similar in the two groups, but more patients in the surgery group required ventilatory support. The hospital mortality rate was significantly lower for the patients who underwent endoscopy (4 deaths) than for those treated surgically (13 deaths) (10 vs. 32 percent, P<0.03). The presence of concomitant medical problems, a low platelet count, a high serum urea nitrogen concentration, and a low serum albumin concentration before biliary decompression were the other independent determinants of mortality in both groups. Conclusions. Endoscopic biliary drainage is a safe and effective measure for the initial control of severe acute cholangitis due to choledocholithiasis and to reduce the mortality associated with the condition.published_or_final_versio

Factors controlling tropospheric O3, OH, NOx, and SO2 over the tropical Pacific during PEM-Tropics B

Observations over the tropical Pacific during the Pacific Exploratory Mission (PEM)-Tropics B experiment (March-April 1999) are analyzed. Concentrations of CO and long-lived nonmethane hydrocarbons in the region are significantly enhanced due to transport of pollutants from northern industrial continents. This pollutant import also enhances moderately O3 concentrations but not NOx concentrations. It therefore tends to depress OH concentrations over the tropical Pacific. These effects contrast to the large enhancements of O3 and NOx concentrations and the moderate increase of OH concentrations due to biomass burning outflow during the PEM-Tropics A experiment (September-October 1996). Observed CH3I concentrations, as in PEM-Tropics A, indicate that convective mass outflux in the middle and upper troposphere is largely independent of altitude over the tropical Pacific. Constraining a one-dimensiohal model with CH3I observations yields a 10-day timescale for convective turnover of the free troposphere, a factor of 2 faster than during PEM-Tropics A. Model simulated HO2, CH2O, H2O2, and CH3OOH concentrations are generally in agreement with observations. However, simulated OH concentrations are lower (∼25%) than observations above 6 km. Whereas models tend to overestimate previous field measurements, simulated HNO3 concentrations during PEM-Tropics B are too low (a factor of 2-4 below 6 km) compared to observations. Budget analyses indicate that chemical production of O3 accounts for only 50% of chemical loss; significant transport of O3 into the region appears to take place within the tropics. Convective transport of CH3OOH enhances the production of HOx and O3 in the upper troposphere, but this effect is offset by HOx loss due to the scavenging of H2O2. Convective transport and scavenging of reactive nitrogen species imply a necessary source of 0.4-1 Tg yr-1 of NOx in the free troposphere (above 4 km) over the tropics. A large fraction of the source could be from marine lightning. Oxidation of DMS transported by convection from the boundary layer could explain the observed free tropospheric SO2 concentrations over the tropical Pacific. This source of DMS due to convection, however, would imply in the model free tropospheric concentrations much higher than observed. The model overestimate cannot be reconciled using recent kinetics measurements of the DMS-OH adduct reaction at low pressures and temperatures and may reflect enhanced OH oxidation of DMS during convection. Copyright 2001 by the American Geophysical Union

Seasonal differences in the photochemistry of the South Pacific: A comparison of observations and model results from PEM-Tropics A and B

A time-dependent photochemical box model is used to examine the photochemistry of the equatorial and southern subtropical Pacific troposphere with aircraft data obtained during two distinct seasons: the Pacific Exploratory Mission-Tropics A (PEM-Tropics A) field campaign in September and October of 1996 and the Pacific Exploratory Mission-Tropics B (PEM-Tropics B) campaign in March and April of 1999. Model-predicted values were compared to observations for selected species (e.g., NO2, OH, HO2) with generally good agreement. Predicted values of HO2 were larger than those observed in the upper troposphere, in contrast to previous studies which show a general underprediction of HO2 at upper altitudes. Some characteristics of the budgets of HOx, NOx, and peroxides are discussed. The integrated net tendency for O3 is negative over the remote Pacific during both seasons, with gross formation equal to no more than half of the gross destruction. This suggests that a continual supply of O3 into the Pacific region throughout the year must exist in order to maintain O3 levels. Integrated net tendencies for equatorial O3 showed a seasonality, with a net loss of 1.06×1011 molecules cm-2 s-1 during PEM-Tropics B (March) increasing by 50% to 1.60×1011 molecules cm-2 s-1 during PEM-Tropics A (September). The seasonality over the southern subtropical Pacific was somewhat lower, with losses of 1.21×1011 molecules cm-2 s-1 during PEM-Tropics B (March) increasing by 25% to 1.51×1011 molecules cm-2 s-1 during PEM-Tropics A (September). While the larger net losses during PEM-Tropics A were primarily driven by higher concentrations of O3, the ability of the subtropical atmosphere to destroy O3 was ∼30% less effective during the PEM-Tropics A (September) campaign due to a drier atmosphere and higher overhead O3 column amounts. Copyright 2001 by the American Geophysical Union

Effects of adding natural sounds to urban noises on the perceived loudness of noise and soundscape quality

Introducing pleasant natural sounds to mask urban noises is an important soundscape design strategy to improve acoustic comfort. This study investigates the effects of signal-to-noise ratio (SNR) between natural sounds (signal) and the target noises (noise) and their temporal characteristics on the perceived loudness of noise (PLN) and overall soundscape quality (OSQ) through a laboratory experiment. Two types of urban noise sources (hydraulic breaker and traffic noises) were set to A-weighted equivalent sound pressure levels (SPL) of 55, 65, and 75 dB and then augmented with two types of natural sounds (birdsong and stream), across a range of SNRs. Each acoustic stimulus was a combination of noise and natural sound at SNRs from −6 to 6 dB. Averaged across all cases, the subjective assessment of PLN showed that augmenting urban noise separately with the two natural sounds reduced the PLN by 17.9%, with no significant differences found between the birdsong and stream sounds. Adding natural sounds increased the OSQ by on average 18.3% across the cases, but their effects gradually decreased as the noise level increased. The OSQ of the birdsong and stream sounds were similar for traffic noise, whereas the stream sound was rated higher than the birdsong for the breaker noise. The results suggest that increasing the dissimilarity in temporal structure between the target noise and natural sounds could enhance the soundscape quality. Appropriate SNRs were explored considering both PLN and OSQ. The results showed that the SNR of −6 dB was desirable when the A-weighted SPL of the noise rose to 75 dB