Gaia early data release 3: summary of the contents and survey properties (Corrigendum)

ERRATUMThis article is an erratum for:[https://doi.org/10.1051/0004-6361/202039657]​​​​​​​Instrumentatio

Preheating Impact On The Degree Of Conversion And Water Sorption/solubility Of Selected Single-bottle Adhesive Systems

Objective: This study evaluated the degree of conversion (DC) and the water sorption/solubility of preheated single-bottle adhesive systems. Methods and Materials: Five adhesive systems were tested: Adper Easy One and Adper Single Bond 2 (3M ESPE), Excite and Tetric N-Bond (Ivoclar/Vivadent), and XP Bond (Dentsply/Caulk). After storage for two hours at 25deg;C or 60°C, 50 samples (n=5) were prepared for all adhesive systems and stored dry in lightproof containers at 37°C for 24 hours. Fourier transform infrared/attenuated total reflectance spectroscopy was used to evaluate the DC, and water sorption/solubility was measured by means of mass loss and gain after water storage. The data were analyzed by two-way analysis of variance followed by Tukey's test (p>0.05). Results: Preheated adhesive systems showed statistically significantly higher DC than those kept at 25°C. Except for XP Bond, preheated adhesive systems presented statistically significantly lower water sorption/solubility means. Conclusions: Preheating improved the DC for all tested adhesive systems. Also, it promoted a decrease of water sorption/solubility, except for the XP Bond adhesive system.396637643Breschi, L., Mazzoni, A., Ruggeri, A., Cadenaro, M., Di Lenarda, R., De Stefano Dorigo, E., Dental adhesion review: Aging and stability of the bonded interface (2008) Dental Materials, 24 (1), pp. 90-101King, N.M., Tay, F.R., Pashley, D.H., Hashimoto, M., Ito, S., Brackett, W.W., García-Godoy, F., Sunico, M., Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application (2005) American Journal of Dentistry, 18 (2), pp. 126-134Borges, B.C., Souza-Junior, E.J., Brandt, W.C., Loguercio, A.D., Montes, M.J., Puppin-Rontani, R.M., Sinhoreti, M.A., Degree of conversion of simplified contemporary adhesive systems as influenced by extended air-activated or passive solvent volatilization modes (2012) Operative Dentistry, 37 (3), pp. 246-252Kanehira, M., Finger, W.J., Hoffmann, M., Endo, T., Komatsu, M., Relationship between degree of polymerization and enamel bonding strength with self-etching adhesives (2006) Journal of Adhesive Dentistry, 8 (4), pp. 211-216Wang, Y., Spencer, P., Yao, X., Ye, Q., Effect of coinitiator and water on the photoreactivity and photopolymerization of HEMA/camphorquinone-based reactant mixtures (2006) Journal of Biomedical Materials Research. Part A, 78 (4), pp. 721-728Cadenaro, M., Antoniolli, F., Codan, B., Agee, K., Tay, F.R., Dorigo Ede, S., Pashley, D.H., Breschi, L., Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content (2010) Dental Materials, 26 (4), pp. 288-294Wang, Y., Spencer, P., Continuing etching of an all-in-one adhesive in wet dentin tubules (2005) Journal of Dental Research, 84 (4), pp. 350-354Daronch, M., Rueggeberg, F.A., De Goes, M.F., Monomer conversion of pre-heated composite (2005) Journal of Dental Research, 84 (7), pp. 663-667Loguercio, A.D., Salvalaggio, D., Piva, A.E., Klein-Júnior, C.A., Accorinte Mde, L.R., Meier, M.M., Grande, R.H.M., Reis, A., Adhesive temperature: Effects on adhesive properties and resin-dentin bond strength (2011) Operative Dentistry, 36 (3), pp. 293-303Daronch, M., Rueggeberg, F.A., De Goes, M.F., Giudici, R., Polymerization kinetics of pre-heated composite (2006) Journal of Dental Research, 85 (1), pp. 38-43Abate, P.F., Rodriguez, V.I., Macchi, R.L., Evaporation of solvent in one-bottle adhesives (2000) Journal of Dentistry, 28 (6), pp. 437-440Liu, Y., Tjäderhane, L., Breschi, L., Mazzoni, A., Li, N., Mao, J., Pashley, D.H., Tay, F.R., Limitations in bonding to dentin and experimental strategies to prevent bond degradation (2011) Journal of Dental Research, 90 (8), pp. 953-968Nomoto, R., McCabe, J.F., Nitta, K., Hirano, S., Relative efficiency of radiation sources for photopolymerization (2009) Odontology, 97 (2), pp. 109-114Malacarne-Zanon, J., Pashley, D.H., Agee, K.A., Foulger, S., Alves, M.C., Breschi, L., Cadenaro, M., Carrilho, M.R., Effects of ethanol addition on the water sorption/solubility and percent conversion of comonomers in model dental adhesives (2009) Dental Materials, 25 (10), pp. 1275-1284Duskova-Smrkova, M., Dusek, K., Processes and states during polymer film formation by simultaneous crosslinking and solvent evaporation (2002) Journal of Materials Science, 37 (22), pp. 4733-4741Van Landuyt, K.L., Snauwaert, J., De Munck, J., Peumans, M., Yoshida, Y., Poitevin, A., Coutinho, E., Van Meerbeek, B., Systematic review of the chemical composition of contemporary dental adhesives (2007) Biomaterials, 28 (26), pp. 3757-3785Manhart, J., Trumm, C., Microleakage of XP bond in class II cavities after artificial aging (2007) Journal of Adhesive Dentistry, 9, pp. 261-264Hashimoto, M., Ito, S., Tay, F.R., Svizero, N.R., Sano, H., Kaga, M., Pashley, D.H., Fluid movement across the resin-dentin interface during and after bonding (2004) Journal of Dental Research, 83 (11), pp. 843-848Ferracane, J.L., Berge, X.H., Condon, J.R., In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler/matrix coupling (1998) Journal of Biomedical Materials Research, 42 (3), pp. 465-472Malacarne, J., Carvalho, R.M., De Goes, M.F., Svizero, N., Pashley, D.H., Tay, F.R., Yiu, C.K., Carrilho, M.R., Water sorption/solubility of dental adhesive resins (2006) Dental Materials, 22 (10), pp. 973-980Schneider, L.F., Cavalcante, L.M., Consani, S., Ferracane, J.L., Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione (2009) Dental Materials, 25 (3), pp. 369-375. , 118-128Yiu, C.K., Pashley, E.L., Hiraishi, N., King, N.M., Goracci, C., Ferrari, M., Carvalho, R.M., Tay, F.R., Solvent and water retention in dental adhesive blends after evaporation (2005) Biomaterials, 26 (34), pp. 6863-6872Ito, S., Hoshino, T., Iijima, M., Tsukamoto, N., Pashley, D.H., Saito, T., Water sorption/solubility of self-etching dentin bonding agents (2010) Dental Materials, 26 (7), pp. 617-62

Antibody response between pigs of Piau and a commercial breed naturally infected with Porcine circovirus 2

ABSTRACT Brazilian pig population is made up of several naturalized breeds; among them the Piau breed is known for its rusticity and large fat stores. The naturalized breeds, in comparison with commercial ones, may have an increased resistance to diseases circulating in their territory. Thus, this study aimed to verify if there are differences between the serologic profile against Porcine circovirus 2 (PCV2) of Piau pigs and that of a commercial breed from a farm naturally infected by PCV2. The serum viral load was measured by qPCR, and levels of anti-PCV2 antibodies were measured by ELISA. The results showed that the serum viral load was similar across all animals. However, Piau piglets showed higher levels of antibodies compared to commercial piglets (P= 0.05), while sows of the commercial breed showed higher levels than the Piau breed (P< 0.01). There was not a statistical difference between pigs of different production stages in the seroprevalence of PCV2 or the blood viral load. This work demonstrates that, with regard to a natural PCV2 infection, the Piau breed has a different humoral immune response compared to the response developed by the commercial pigs. The results support the importance of conservation of native breeds

Spray-dried extract from the Amazonian adaptogenic plant Ampelozizyphus amazonicus Ducke (Saracura-mirá): Chemical composition and immunomodulatory properties

Ampelozizyphus amazonicus Ducke is a medicinal plant used in the Amazon region to prepare a drink with tonic, immunomodulatory and adaptogenic properties. Due to the growing interest in dietary supplements with these properties and, to provide a new functional ingredient, barks from A. amazonicus were extracted. The extract was spray dried without drying adjuvants, resulting in a powder (SARF), which was characterized by its physico-chemical properties and proximate, mineral and saponin contents. The SARF saponins were characterized by ultra-high-performance liquid chromatography/high resolution accurate mass spectrometry (HPLC-HRMSn) analysis. The SARF particles tended to have a spherical shape and a unimodal size distribution. The particles also had good rehydration characteristics and high saponin content (33%). The effect of SARF on antibody production was investigated, and we found that SARF increased the basal levels of anti-ovalbumin, anti-LPS and anti-dextran IgM antibodies, and the anti-dextran IgG antibodies in unimmunized mice. No increase in antibody titers was observed after SARF treatment in immunized mice. These results suggest that SARF could be an interesting new functional ingredient for food applications or pharmaceutical products